• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.843-851
• /
• 2020

This study focuses on identifying and prioritizing the broader performance measures for the service supply chains by taking the case of Majan Electricity Company, Sohar, in the Sultanate of Oman. For an examination of the uniformity of ultimate objectives and the priorities therein, two strata of respondents with a total of fourteen respondents were approached for their valuable insights. Suitable structured instruments were personally administered to elicit the insightful and worthy responses. The two multi-criteria decision-making techniques, namely, the Fuzzy Analytical Hierarchy Process and the Best-Worst Method were used to reach a meaningful prioritization of the identified and refined broader performance measurement dimensions. The results show that there exists a minor gap between the two respondents' groups in terms of their prioritizations. The major finding points to the difference in terms of the topmost priorities as revealed by the two set of respondents. For one group of respondents, the customer satisfaction matters the most, whereas for the other group, it is the overall profitability that matters the most. This gap against the utopian state assists in concluding that there is a requirement to reorient the employees so as to have a shared and common understanding of the organizational priorities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.170-175
• /
• 2018

While the term online shopping refers to all online transactions, cross-border online shopping means shopping activities purchasing products or services over the internet for the customers abroad. As Internet use for the international shopping activity increasing, cross border online shopping has grown substantially for last decade. This study is about the problem regarding the cross border online shopping for two different countries and the variables that influence their shopping behavior. The cross border online shopping has been increased by the growth of Internet access. However, the growth of the Internet use does not guarantee a successful development of cross border e-commerce for every country. To find out the perception for cross-border online shopping for two different cultures, shoppers from two countries with different cultural background were chosen, and the perception for cross-border online shopping from each culture is contrasted. For statistical Analysis, ANOVA is used to find the relationship between a single non-metric independent variable, and multiple metric dependent variables. Hofstede's cultural dimensions model is adopted for this study as a tool to find out the patterns of cross border online shopping. This study showed what the variables would affect the perception in cross border online shopping. The results of this study indicated that cross border online shoppers with different culture were notably different on two variables identified-timeliness and ease of use.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.89-95
• /
• 2012

In this paper, microchannels for the flow control of two fluids with different volumes have been designed, fabricated, and verified. The dimensions of the inlets were determined based on the Stokes equation in order to realize that the flow of the two fluids meet at the same time, and to maintain a certain configuration when the flows passed through each inlet channel. The designed microchannels were confirmed using computational fluid dynamics simulation for the incompressible, Newtonian, and transient flows. In addition, a microfluidic system containing the designed microchannels was fabricated by soft lithography, and the pressure-driven flows of the two fluids were characterized by microfluidic experiments.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2016

De Stijl in order to began in the Netherlands in 1917 is an art movement that becomes the theoretical background of modernism design was the foundation geometric abstraction. Steel design for that they offered a new paradigm at that time art, in various fields such as industrial design is still applied, especially works of De Stijl in the design area of urniture it became the beginning of the modern furniture. The starting point of this study is to analyze the two-dimensional representation characteristics to understand the background of the formation with the basic concepts of De Stijl. Therefore the generation of the surface to be displayed in the work of De Stijl and to analyze the divided element, and not if learn their expression characteristics. Also the line and the plane of the two-dimensional modeling properties of De Stijl, after described colors, and studied the characteristics of De Stjil writers for typical analyzes the moldability shown in their work, which based on, we try to present a new representation technique.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.1
• /
• pp.49-63
• /
• 1983

Coupled transverse shaft vibrations have become the target of great concern in high powered ships such as container ships. Due to increasing ship's dimensions and high propulsive power, resonance frequencies of the propeller shaft system tend to decrease and can appear in some cases within the operating speed range of engine. In this connection, the coupled free transverse vibrations of shaft system in two planes are theoretically investigated. This shaft system carries a number of discs and is flexibly supported by a number of bearing stiffness are considered for the calculation. Transfer matrix method is applied to calculate the shaft responses in both planes. A digital computer program is developed to calculate the shaft responses of the coupled transverse vibrations in two planes. An experimental model shaft system is made. It is composed of a disc, shafts, ball bearings thrust bearings and flexible bearing supports. The shaft system is excited by an electrical magnet, and shaft vibration responses in two planes are measured with the strain gage system. From these measurements, the natural frequencies of the shaft system in both planes are found out. The developed program is also used to calculate the shaft vibration responses of experimental model shaft system. From the results of these calculations, the natural frequencies of shaft system in two planes are derived. Theoretical predictions of model shaft natural frequencies show good agreements with its esperimental measurements.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.310-316
• /
• 2019

This paper presents two methods for designing a high-speed air spindle operated over the rotational speed of 50,000 rpm. The first method is an approximate method, which assumes a symmetric spindle shape even though it is not symmetric in reality. The second is an analysis of rotordynamics using beam and solid models. The approximate method can be used to calculate the bearing load capacities, stiffness and damping coefficients, stability of the shaft system, and response of the forced excitation from the unbalanced mass. Designers can use this method to determine the dimensions of the desired spindle at the first stage of the design. The more detailed behavior of the spindle can be calculated using the rotordynamics theory using beam and solid models based on the Finite Element Method. In this paper, a spindle, with two air bearings, one motor at the end, and two air thrust bearings, is newly developed. The solutions from the two rotordynamics theories are compared with the solution obtained using the approximate method. The three calculations are in agreement, and the procedure for the design of a spindle system, supported on the externally pressurized air bearings, ispresented and discussed.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.347-353
• /
• 2022

Using the Heckman two-step procedure, this study investigates the relationship between management accounting implementation and firm effectiveness. The research data for this study was acquired from 450 publicly traded companies in Vietnam; however, the final sample only includes 304 responses containing useful information. The reliability analysis was used to evaluate the acquired data to examine the qualities of constructs and the dimensions that make them up. Then, the Heckman two-step technique was performed to analyze the causal connection from the acceptance of management accounting to firm effectiveness allowing for the effect of environmental uncertainty and organizational characteristics on the likelihood of adopting management accounting. The empirical findings show that management accounting acceptance determines firm effectiveness; however, the research model on the relationship between management accounting adoption and firm effectiveness has a sample selection bias. The main conclusions of this study are that there is a difference in the effects of management accounting adoption on business effectiveness when sample selection bias is not taken into consideration. When potential sample selection bias is taken into account by integrating environmental uncertainty and organizational characteristics in the research model, the effect of adopting management accounting on company effectiveness becomes minor.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.22 no.3
• /
• pp.347-362
• /
• 2024

In Korea, two types of spent nuclear fuels (SNFs) are generated, pressurized light water reactor type (PWR) and pressurized heavy water reactor type (PHWR; CANDU), that differ greatly in size, decay heat, and radioactive characteristics. Technology development for the disposal of SNFs has mainly focused on PWR SNFs that are large in size and have extremely high decay heat and radioactivity. However, CANDU SNFs should be considered differently from PWR SNFs in deep geological disposal systems because their characteristics significantly differ from those of PWR SNFs in terms of their dimensions, number of SNF bundles, and handling systems in nuclear power plant sites. In this paper, after reviewing the status of the CANDU SNF disposal concept by Canada and Korea, concepts related to the direct geological disposal of CANDU SNFs were described, and two concepts were proposed based on the results of the development. The engineered barrier systems developed using these two concepts were comparatively analyzed in terms of disposal safety, disposal efficiency, and technical maturity. Based on the results of the comparative analyses, a vertical-type emplacement disposal concept was determined as a reference concept for the deep geological disposal of CANDU SNFs.

• Korean Journal of Family Social Work
• /
• no.59
• /
• pp.27-53
• /
• 2018

The objective of this study was to investigate the influence of family-related factors and age-friendly environment on intergenerational interaction in middle-aged group and the older adult group. Based on the results, this study is to suggest countermeasures for decreasing intergenerational interaction with the population aging. This study analyzed 260 sample participants aged from 45 to 64 and 399 sample participants aged 64 and more, categorizing them into middle-aged group and the older adult group respectively. The sample participants were taken from '2014 Survey on the Aged Society' and had at least one adult child aged over 18 at the time of participation. In order to identify the relationship between five sub-dimensions related to family, age-friendly environment and intergenerational interaction within the family in two age groups, t-test and multiple regression analysis were used. As a result, both two family-related factors had positive correlation with intergenerational interaction within the family. However, affective solidarity showed a higher significance in the middle-aged group and familism showed a higher significance in the older adult group. Among the sub-dimensions related to age-friendly environment, only personal opinion on age integration showed significance in the older adult group. This study provides several implications from the results.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.597-603
• /
• 2011

Objective: The objective of this study was to compare one-hand and two-hands lifting activity in terms of biomechanical stress for the range of lifting heights from 10cm above floor level to knuckle height. Background: Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lifting tasks using both a one-handed as well as a two-handed lifting technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lifting tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lifting tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 43%, as the workload was increased twice from 7.5kg to 15.0kg. For the right-hand lifting task, these were increased by the average 34%. For the two-hands lifting tasks, these were increased by the average 25%. The lateral shear forces at L5/S1 of one-hand lifting tasks, notwithstanding the half of the workload of two-hands lifting tasks, were very high in the 300~317% of the one of two-hands lifting tasks. The moments at L5/S1 of one-hand lifting tasks were 126~166% of the one of two-hands lifting tasks. Conclusion: It is concluded that the effect of workload for one-hand lifting is greater than two-hands lifting. It can also be concluded that asymmetrical effect of one-hand lifting is much greater than workload effect. Application: The results of this study can be used to provide guidelines of recommended safe weights for tasks involved in one-hand lifting activity.