• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.38-43
• /
• 2015

In this paper, we present novel dual-band microstrip antennas using inverted-L-shaped parasitic elements vertically at radiation apertures for GPS L1(1.575 GHz) and L2(1.227 GHz) bands. For making dual band which has large interval, the inverted-L-shaped parasitic element was loaded at the radiation aperture of a half-wavelength patch antenna(GPS L1) in opposite direction of the feeding point for receiving the low frequency(GPS L2). The low frequency occurs by perturbation and coupling between the patch and parasitic. Next, due to use circular polarizations at the GPS applications, two inverted-L-shaped parasitic elements were loaded at radiation apertures of each polarizations and the feeding point was moved at diagonal part of the patch. The dimensions of the designed circularly polarized antenna were $88.5{\times}79{\times}10.4mm^3$ ($0.36{\lambda}L{\times}0.32{\lambda}L{\times}0.04{\lambda}L$, ${\lambda}L$ is the free-space wavelength at 1.227 GHz). Measured -10 dB bandwidths were 116.3 MHz(7.4%) and 64.3 MHz(5.2%) at GPS L1 and L2 bands, respectively. All of these cover the respective required system bandwidths. The measured 3 dB axial ratio bandwidths were 11.7 MHz(0.74%) and 14 MHz(1.14%), respectively. Within each of the designed bands, broadside radiation patterns were observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.95-101
• /
• 2015

Purpose - This study provides evidence of the impact of the mandatory adoption of Korean equivalents to International Financial Reporting Standards (K-IFRS) on accounting quality. K-IFRS uses fair value as a basis of measurement and is characterized by principle-based standards. These characteristics can lead to a decrease in conservatism. Therefore, this study aims to examine whether or not there is a change in the level of conservatism before and after the enforcement of K-IFRS (2007~2014). By comparing 2007 through 2008 and 2013 through 2014 (excluding 2009 to 2012), we test "the temporary adjustment phenomenon" and document an overall decline in the degree of conservatism after the adoption of K-IFRS. Research design, data, and methodology - Our sample is comprised of data of all listed Korea Composite Stock Price Index (KOSPI) manufacturing distribution companies in Korea from 2007 to 2014, which yields the pooled sample of 4,412 (panel A) and 1,915 (panel B) firm-year observations for hypotheses 1 and 2. In line with recent literature, we adopt the Givoly and Hayn (2000) model, which recomputes the non-operating accruals, excluding two components that are most likely to capture the effect of restructuring activities: special items and gains or losses from discontinued operations. In addition, we also use these variables: SIZE, LEV, INV_CYCLE, ROA, OWN, and FOR. Results - Our sample period spans 2007 to 2014. This offers evidence on the effect of the mandatory adoption of IFRS on conservatism. Our findings can be summarized as follows. First, in panel A, for mandatory K-IFRS adoption (2011), we do not find any significant evidence of conservatism. We can guess that the "temporary adjustment phenomenon" is the reason that we do not find significant evidence of conservatism. Second, we investigate panel B from 2009 to 2012. We document an overall decline in the degree of conservatism after the adoption of K-IFRS. We can assume that these results are due to "the temporary adjustment phenomenon." Conclusions - This study finds that conservatism significantly decreased after IFRS adoption. In particular, this study makes the initial effort to elucidate "the temporary adjustment phenomenon" to analyze the effect of K-IFRS on conservative accounting. We argue that K-IFRS are conceptually conservative but that inappropriate application of the conservatism principles is likely to prevent financial reporting from reaching the level of conservatism targeted by the IASB. Overall, this paper contributes to the literature on IFRS and can be useful to capital market supervisors who are monitoring the trends of the firms implementing K-IFRS. Additionally, our results inform stakeholders of the potentially negative effect of the greater flexibility permitted by IFRS and/or lack of appropriate enforcement on key dimensions of accounting quality. This has important implications for Korean regulators and standard setters as they review the cost and benefits of IFRS. Our study also sheds light on the importance of the institutional environment in achieving the targeted objectives for improving financial reporting quality.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.348-355
• /
• 2006

Tennison was the first to recognize and to preserve the Cupid's bow by lowering the peak in the margin of the cleft. Randall had modified the Tennison's repair based on accurate measurements. Bardach's technique evolved from the basic concept of triangular flap cleft lip repair described by Tennison-Randall method. Precise measurements are used to define the dimensions of the equilateral triangular flap, which is created on the cleft side and is inserted into an equilateral triangular defect on the noncleft side. Two symmetrical vertical distances on either side of the cleft are thus formed. It is essential that the incisions in the skin correspond precisely with those on the muscles and mucosa, and that all layers are sutured with the use of the triangular flap, thus preventing vertical scar contracture. This procedure produces a symmetric, balance lip with a well-defined Cupid's bow, a symmetric vermilion, and a properly aligned orbicularis oris muscle. We had treated three patients with unilateral incomplete cleft lip by using Bardach's triangular flap method. The operation scars could be reduced comparing to Millard method because Bardach's method did not use the columella base and the alar base incision. And the flap design was more simple and accurate comparing to Tennison-Randall method. On the other hand, the postoperative scars on the philtrum pointed as a disadvantage of triangular flap method were cosmetically acceptable because the three patients had incomplete cleft lip. We have experienced that Bardach's triangular flap is a recommendable technique for the repair of unilateral incomplete cleft lip.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.73-87
• /
• 2018

As men in their 30s are spending more money on clothing, it is becoming increasingly important to first conduct an anthropometric study and then develop garment patterns accommodating the changes found in body sizes and types of men in their 30s, in order to effectively address their fit dissatisfaction. Thus this study aims to explore changes in upper body sizes and body types of men in their 30s, which provide basic measurements for designing major garment items including jackets and shirts. To this purpose, key anthropometric dimensions of the upper body of men in their 30s, taken from the 6th (2015) and 7th (2016) surveys conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major upper body sizes to track changes with measuring time. Factor and cluster analyses were used to classify body types. By comparing the two surveys, it was found that the overall body sizes of men in their 30s were increasing in height-related items, circumference, thickness, and width, -as well as body weight and BMIs. Upper body height-related items, in particular, showed a higher average value in the 6th survey than in the 7th, indicating that the overall body types of men are becoming "westernized" with longer legs and shorter torso. Finally, five factors were derived to determine the typical upper body types of men in their 30s and the body types were classified into three categories according to the cluster analysis. First, those with a relatively small build with short stature and torso. Second, those with the highest stature and vertical dimension with the smallest torso volume and least body fatness. Third, those with the biggest torso volume and most body fatness with bigger width between armpits and shoulders. The distributional pattern analysis showed that men in their 30s tend to have increasingly higher stature but lower body weight and BMIs than in the past, implying that their body types are becoming close to those of men in their 20s.

• Journal of The Korean Association For Science Education
• /
• v.38 no.3
• /
• pp.331-341
• /
• 2018

The purpose of this study is to explore relationships among the structural elements of Science Classroom as Community of Practice (SCaCoP). For this, we investigated the case of small-group activities in practical work of elementary school science in a qualitative way based on the five structural elements of SCaCoP, such as responsibility for learning, common interest, open participation, mutual relationship, and practice. We observed and interviewed five small-groups during five lessons with video- and audio- recording to collect data. The results of analysis are as follows. First, 'mutual relationship' was a necessary-condition for 'open participation.' We also found that 'common interest' has two dimensions related to their interest and related to learning topic. The former interacted with 'open participation,' and the latter was influenced by 'responsibility for learning. Lastly, 'practice' enhanced the features of other elements with dynamic relationships. Based on these results, we suggested the relationships among the structural elements of SCaCoP and discussed implications related to the perspective that regards learning as participation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.278-283
• /
• 2017

Purpose: The aim of this study was to evaluate the interdental distances of anterior, premolar, and molar teeth at the cementoenamel junction (CEJ) and 2 mm below the CEJ in healthy natural dentition with cone-beam computerized tomography (cone-beam CT) in order to provide valuable data for ideal implant positioning relative to mesiodistal bone dimensions. Materials and Methods: Two hundred patients who visited Dental Hospital, Wonkwang University, who had natural dentition with healthy interdental papillae, and who underwent cone-beam CT were selected. The cone-beam CT images were converted to digital imaging and communication in medicine (DICOM) files and reconstructed in three-dimensional images. To standardize the cone-beam CT images, head reorientation was performed. All of the measurements were determined on the reconstructed panoramic images by three professionally trained dentists. Results: At the CEJ, the mean maxillary interdental distances were 1.84 mm (anterior teeth), 2.07 mm (premolar), and 2.08 mm (molar), and the mean mandibular interproximal distances were 1.55 mm (anterior teeth), 2.20 mm (premolar), and 2.36 mm (molar). At 2mm below the CEJ, the mean maxillary interdental distances were 2.19 mm (anterior teeth), 2.51 mm (premolar), and 2.60 mm (molar), and the mean mandibular interproximal distances were 1.86 mm (anterior teeth), 2.53 mm (premolar), and 3.01 mm (molar). Conclusion: The interdental distances in the natural dentition were larger at the posterior teeth than at the anterior teeth and also at 2 mm below the CEJ level compared with at the CEJ level. The distances between mandibular incisors were the narrowest and the distances between mandibular molars were the widest in the entire dentition.

• Korean Journal of Social Welfare
• /
• v.55
• /
• pp.231-254
• /
• 2003

The main premise of this study is that the assurance on human rights of the mentally ill is contradictory to 'the greatest happiness of the greatest number' or 'therapeutic benefits'. Accordingly this study aims to find out the conceptual framework of assurance and restriction on human rights of the mentally ill. Using qualitative method, this study conducted the in-depth interview with 10 general public, 9 professionals, 6 mentally ill regarding the several issues of human rights included long-term hospitalization, restriction on driver's licence, involuntary hospitalization, restriction on communication in psychiatric ward. Research results are as follows ; two sets of dimensions are inferred from the analysis of interview transcript. First dimension is the focus of justification, ranging from the emphasis on positive consequences influenced to 'the greatest numbers'(the utilitarian thought) to the emphasis on assurance of rights without any conditions(the deontological thought). Second dimension is the locus of decision, raging from the formal system included the professionals and the government agency to the informal system included the families and the mentally ill. And there are differences in attitudes toward assurance and restriction on rights of the mentally ill among general public, professionals, and the mentally ill. In detail, general public regarded that 'involuntary hospitalization' and 'restriction on driver's license' which are apt to be directly harmful to people must be justified by consequence-centered and decided by the formal system, while 'long-term hospitalization' which is less harmful to people could be justified by right-centered and decided by the formal-system. And they thought that 'restriction of communication' could be justified by right-centered and decided by the informal system. Based on the findings, this study would conclude that practical guidelines for the promotion of human rights of the mentally ill must be developed.

• Korean Journal of Social Welfare
• /
• v.60 no.1
• /
• pp.127-157
• /
• 2008

The purpose of the current research is to reconstruct the 'structure of biographical processes' on the lives of the elderly couples residing in the rural area in terms of 'gender relations.' Autobiographical-narrative interviews with each of the six elderly couples were conducted. Interview data were analyzed through the eclectic application of $Sch\ddot{u}tze's$ autobiographical-narrative interview and Dausien's feministic biographical research methods. Research findings revealed that each biography of the elderly couples represents the 'structure of biographical process' that shapes 'trajectories.' Such 'trajectories' were found to characterize two dimensions of 'gender relations'. First, on the micro- and macro-levels of 'trajectories,' 'gender relations' were noticed. The 'trajectories' of the male elderly were found to be both in personal and familial contexts and in socio-structural context, while those of the female elderly were found to be mostly in personal and familial contexts. Second, on the micro-level of 'trajectories,' 'gender relations' were noticed. The male elderly were more or less different from one another, contingent on the phases of life. They turned out to take simple roles of performing 'outdoor duties' and to be passive in doing 'housework.' Contrary to the male elderly, the female counterparts proved to actively assume 'dual roles' in 'family affairs' and 'outdoor duties'. Such findings led to the observation of 'doing gender' in the biographies of the elderly and, furthermore, to capturing the fact that 'doing gender' is different, depending on the phases of life and sex. Finally, some implications for practice were drawn from the current findings with special reference to biography and gender relations.

• Journal of Broadcast Engineering
• /
• v.14 no.5
• /
• pp.638-649
• /
• 2009

Image resizing (or scaling) is one of the most essential issues for the success of visual service because image data has to be adapted to the variety of display features. For 2D imaging, the image scaling is generally accomplished by 2D image re-sampling (i.e., up-/down-sampling). However, when it comes to stereoscopic 3D images, 2D re-sampling methods are inadequate because additional consideration on the third dimension of depth is not incorporated. Practically, stereoscopic 3D image scaling is process with left/right images, not stereoscopic 3D image itself, because the left/right Images are only tangible data. In this paper, we analyze stereoscopic 3D image scaling from two aspects: geometrical deformation and frequency-domain aliasing. A number of 3D displays are available in the market and they have various screen dimensions. As we have more varieties of the displays, efficient stereoscopic 3D image scaling is becoming more emphasized. We present the recommendations for the 3D scaling from the geometric analysis and propose a disparity-adaptive filter for anti-aliasing which could occur during the image scaling process.