• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.15-26
• /
• 2015

The compact structure and high-quality effluent of membrane bioreactors make them well-suited for decentralized greywater reclamation. However, the occurrence of membrane fouling continues to limit their effectiveness. To address this concern, a unique membrane module configuration was developed for use in a decentralized greywater treatment system. The module featured local aeration directly below a series of inclined membrane bundles, giving the overall module a twisted appearance compared to a module with vertically orientated fibres. The intent of this design was to increase the frequency and intensity of collisions between rising air bubbles and the membrane surface. Material related to the construction of custom-fit modules is rarely communicated. Therefore, detailed design and assembly procedures were provided in this paper. The twisted module was compared to two commercially available modules with diverse specifications in order to assess the relative performance and marketability of the twisted module with respect to existing products. Contaminant removal efficiencies were determined in terms of biochemical oxygen demand, chemical oxygen demand, ammonia, total nitrogen, total phosphorus, and turbidity for each module. Membrane fouling was monitored in terms of permeate flux, transmembrane pressure, and membrane resistance. Following 168 h of operation, the twisted module configuration demonstrated competitive performance, indicating good potential for further development and commercialization.

• Membrane Journal
• /
• v.30 no.1
• /
• pp.66-77
• /
• 2020

The current study focused on the effect of twisting hollow fibers (HFs) in a module during forward osmosis operation mode. Computational fluid dynamics simulation was employed for a straight HF module and twisted modules with five different angles to predict the mass transfer and observe the draw solution profile in terms of concentration and pressure. The simulation results showed that when the membranes were twisted, the concentration was distributed more evenly and the pressure at the module outlet increased gradually as the twisting angle increased. As pressure at the outlet increased, the fluid velocity inside the membrane decreased and the residence time of fluid increased, thereby facilitating mass exchange across the membrane. This is evidenced by a doubling of the ratio of water flux through the membrane in module flux when the HFs were twisted.

• Journal of the Chungcheong Mathematical Society
• /
• v.30 no.1
• /
• pp.77-102
• /
• 2017

As an analogy of $Poincar{\acute{e}}$ series in the space of modular forms, T. Ono associated a module $M_c/P_c$ for ${\gamma}=[c]{\in}H^1(G,R^{\times})$ where finite group G is acting on a ring R. $M_c/P_c$ is regarded as the 0-dimensional twisted Tate cohomology ${\hat{H}}^0(G,R^+)_{\gamma}$. In the case that G is the Galois group of a Galois extension K of a number field k and R is the ring of integers of K, the vanishing properties of $M_c/P_c$ are related to the ramification of K/k. We generalize this to arbitrary n-dimensional twisted cohomology of the ring of integers and obtain the extended version of theorems. Moreover, some explicit examples on quadratic and biquadratic number fields are given.

• Journal of the Chungcheong Mathematical Society
• /
• v.14 no.1
• /
• pp.85-103
• /
• 2001

Suppose that Hand K are paired Hopf algebras and that A is an H - K - bicomodule algebra with multiplication which is a left H-comodule map and is a right K-comodule map. We define a new twisted algebra, $A^{\tau}$ and define $M^{\tau}$ for $M{\in}M_A^K$. We find an equivalent condition for $M^{\tau}{\in}M_{A^{\tau}}^K$. We show that the above defined twisted multiplication is the special case of Beattie's twist multiplication. We show that if K is commutative, then A is an H-module algebra and show that if $H^*$ is cocommutative then the construction of smash product appears as a special case of the new twist product.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1181-1188
• /
• 2011

A control system for stabilizing a small robot or inverted pendulum using twisted gyro wheel is proposed. Conventional stabilizer using inertial wheel employs action-reaction force/torque to control a pendulum, which can generate relatively small torque and short period of output. In this paper, a novel actuation method using twisted gyro torque in 3-dimentional space was proposed to stabilizing a pendulum by twisting the assembly including a rotating gyro wheel. In addition, two special control functions for this type of twisted gyro wheel were designed. One is the function of self-adjusting the mass center of the robot and the other is the torque reloading configuration for continuous torque generation. The proposed system was verified by experimental result and simulation. The designed twisted gyro wheel control system can be easily packed in a small size module and installed in a humanoid robot or inverted pendulum type mechanism.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.109-114
• /
• 2011

An impeller is difficult to machine because of severe collision due to the complex shape, overlapping and twisted shape that form impeller blades. So, most CAM software companies have developed CAM module for manufacturing impeller in addition to their CAM software. But it is not still easy for inexperienced users to machine impellers. The purpose of this paper is the development of automatic CAM module for manufacturing impeller(E-ICAM) which is based on visual basic language and it is used CATIA graphical environment in order to be easily machining impellers. Automatic CAM module for manufacturing of impellers generates tool path, and proposes recommended cutting condition according to the material of stock and tool. In addition, it has also included a post processor for 5-axis control machining. Therefore the user can easily machine impellers using this automation module.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.78-90
• /
• 2017

In this study, brassiere prototype was developed for attaching the measuring module of ECG measurement and body movement while sleeping. For ECG measurement, textile electrodes was made of stretch fabric containing polyurethane in consideration of elasticity of brassiere band. It was used as a conductive yarn by silver coating on the warp. The textile electrodes was woven with twisted twill to increase the density of conductive yarns. The pressure of the brassiere band was enough to sensing stably the ECG, and the elastic band of the brassiere was designed to be wider than 3cm to install the textile electrodes inside, so that textile electrodes was close fitting to the skin at a constant pressure without lifting. The textile electrodes coated with silicon on rear was attached to brassiere elastic band, and the module was installed with a snap connector to textile electrodes of brassiere band. The module was suitable to monitering ECG measurement of a typical R peak, pulse rate and body movement while sleeping without interfering.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.504-507
• /
• 2002

We investigated electro-optic and ionic properties of twisted nematic cells by using control of chiral pitch. These properties are observed in practical experiment and simulations. C-V and V-T curve characteristics were obtained from three types of cells with d/p. It is shown that d/p ratio of short cells exhibit faster response time improved by 20% than normal cell. Also, inter-gray response time is improved each rise time and decay time. And, the increase of saturation voltage is happened because of the small twist angel change from initial state at high voltage near 5V. To compensate for longer black level tail, gamma curve index was varied from g = 2.2 to g = 2.7 in module status. Additionally, adding chiral dopant into TN cells improved ionic characteristics such as increasing VHR, Ion density and DC Hysteresis were decreased..

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.427-431
• /
• 2006

We have studied electro-optic characteristics of reflective $45^{\circ}$ twisted nematic liquid crystal display which implement the new LC orientation using of in-cell retarder film. For the embodiment of reflective liquid crystal display, essentially the optic compensation films was always needed and attached to the outside of glass substrate. In our study, these optic compensation film were not employed in reflective LC cell. On other hand we have employed the in-cell retarder to substitute the optic compensation film and were able to orient the LC molecules using this in-cell retarder. So we have developed the reflective LC cell that has good optical performances without any additional coating process on the in-cell retarder.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2014

An impeller is difficult to machine due to the complex, overlapping and twisted shapes that form the blades of an impeller. Therefore, most CAM software companies have developed a CAM module for manufacturing an impeller in addition to their CAM software. However, it is not easy for inexperienced users to machine impellers. The purpose of this paper is to outline the development of an automatic CAM module for the manufacturing of an impeller (E-ICAM) which is based on visual basic language and which uses a CATIA graphical environment in order to simplify the machining of impellers. The automatic CAM module generates a tool path and proposes the recommended cutting condition according to the stock and tool material. In addition, it includes a post-processor for five-axis control machining. Therefore, a user can easily machine impellers using this automation module. There are two types of impellers: the closed and open types. The closed-type impeller consists of the body and cover parts. To combine these two parts, it is necessary to create tap holes on the shroud of the body. Therefore, in the study, a drilling CAM program for a closed-type impeller is developed and manufactured by creating NC data from the developed drilling program. After manufacturing the test specimen, its compatibility was verified.