• 한국초전도ㆍ저온공학회논문지
• /
• 제5권2호
• /
• pp.51-57
• /
• 2003

This paper proposes a new oscillating flow model of the pressure drop through the regenerator under pulsating pressure. In this oscillating flow model. pressure drop is expressed by the amplitude and the phase angle with respect to the inlet mass flow rate. In order to generalize the oscillating flow model. non-dimensional parameters, which are Reynolds number, Valensi number, gas domain length ratio, oscillating flow friction factor and phase angle of pressure drop, are derived from the capillary tube model of the regenerator. Correlations for the oscillating flow friction factor and the phase angle are obtained from the experiments for the twill-square screen regenerators under various operating frequencies and inlet mass flow rates. The oscillating friction factor is a function of the Reynolds number alone and the phase angle of pressure drop is a function of the Valensi number and the gas domain length ratio. Experiment is also performed to examine the effect of the weave style of screen. Experimental data demonstrate the superiority of the oscillating flow model over the previous steady flow model.

• 복식
• /
• 제57권1호
• /
• pp.163-175
• /
• 2007

This study examines 74 pieces of textiles of Daegaya found in the Jeesan-dong Tomb and Saeng-cho Tomb, and analyzes their characteristics and weaving techniques. Dagaya is known to have produced ramie and hemp from bast fibers. The hemp textiles were all woven in plain weave, and the ramie textiles were woven either in plain weave or plain braid. The ramie textiles were slightly more dense compared to the hemp textiles, however, both had average densities between 0.92 to 0.93, showing that they are balanced plain weave textiles. It was also found that S twist threads were used in the production of the hemp and ramie textiles. The dyed textiles on iron remains were found to be the oldest textiles to use dying techniques for patterns. Silk textiles were woven in plain weave, twill weave, and leno weave. All of the silk were made with non-twisted thread. The densities were between 30 to 58.3 and the the density rates were 1.0 to 2.5 for plain weave silk, this showed that varieties of plain weaver created by different densities of warp and well. The average density of cho was $53.4{\times}22.5/cm^2$ the density rate was about 2.40, therefore warp was woven more dense compared to the weft. There were degummed and raw silk used in silk textiles, but most of them were found to be degummed thread.

• 한국의류학회지
• /
• 제26권2호
• /
• pp.355-363
• /
• 2002

The purpose of this study was to investigate how the weave type, yarn twist fabric count and fiber content of the worsted fabrics affect the subjective sensation of the hand. Thirty worsted fabrics that were mainly used for the spring and fall ladies'suits at national brands were selected. Variables were such as four different kinds of weave types, plain, twill, satin and decorative; two levels of yarn twist, normal and high; various fabric counts; two different fiber contents, pure wool and Lycra contained. Image analysis and wavelet transform techniques were used to quantify the surface fiber, For surface characteristics, MIU, MMD and SMD were measured by KES-FB system. The Questionnaires with 23 adjectives were used for the subjective hand evaluation. Panels were So specialists of fashion or fabric designers and merchandizers. By Factor Analysis, six factors that represent the subjective hand were extracted. The relationship between these factors and structural variables were analyzed. Yarn twist was significantly related to the surface characteristics and resilience. Weave structure affected surface characteristics, volume/warm-cool feeling and resilience. Fabric counts showed relations with volume/warm-cool feeling and the fiber contents with volume/warm-cool feeling, resilience and elastic properties. MIU, MMD and SMD showed no relations with the surface fibers. Subjective sensation of surface characteristics was affected by SMD and surface fibers.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.199-203
• /
• 2003

In order to investigate the effects of cross-sectional shapes on the sound characteristics of polyester fibers, 10 specimens were woven into a twill structure made of round, hollow, triangular, u-shape, cruciform, and composite cross-sectional (▲/▲ ,()/▲, Y/Y) fibers. Their rustling sounds were recorded, and their sound spectra were obtained from FFT analysis. Physical sound parameters (LPT, ΔL, Δf) and Zwicker's psychoacoustic parameters of the loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated from the sound spectra. According to noncircular cross-section fibers, the hollow shaped fiber had the highest value of LPT, ΔL, loudness(Z), and fluctuation strength(Z). The triangular shaped fiber had a lower value of LPT, ΔL, loudness(Z), and roughness(Z) than those of the round shaped fiber. Among composite cross-section fibers, C1(▲/▲) and C3 (Y/Y) had higher values of LPT, ΔL, Δf and loudness(Z) but C2(()/▲) had lower values. Also the LPT, ΔL, sharpness(Z), and roughness(Z) values of different denier were similar to each other, but the Δf and loudness(Z) values increased as the denier increased.

• 복식
• /
• 제51권8호
• /
• pp.1-12
• /
• 2001

An empirical review on silk fabrics of the Chosen period showed that they varied in kind and design according to their uses. Thus the purpose of this study is to classify the fabrics into temple and excavated fabrics according to their uses and collected places and then to examine characteristics of each type. Concerning fabrics collected in temples. satin was most used, followed by twill, tabby, multiply, leno and gauze and clossing fabrics in order. Tabby and silk fabrics used Ju(紬) as their main material. Cho( ) was much more used in fabrics collected in temples than in excavated ones. This indicate that Cho( ), more luxurious than Ju(紬), had divine applications such as covering Buddha s bones of temples. Brilliant, colorful multiply fabrics using goldern and color threads had high effects of ornamenting altar covers, umbrellas, surplices and palanquins. Fabrics held in temples adapted composite designs, in which more than two shapes were used, rather than single ones. Single designs employed plant shapes in most cases. followed by treasures pattern, geometrical, cloud and animal shapes in order. Most composite designs used a combination of animal and plant shapes, followed by plant and geometry, treasures pattern and plant, cloud and animal, and animal, treasures pattern and plant in order. Few excavated fabrics used animal designs while fabrics collected in temples were often designed with shapes of propitious animals such as dragon. Treasures pattern. representing a good omen of Buddhism, was often used sing1y or sometimes compositely with another design.nother design.

• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.123-132
• /
• 2009

Our government has declared the "Synthetic Project for Promoting Han-style" to industrialize and globalize the original form of Korea traditional culture. Han-bok, our traditional folk costume is one of the main subject of this project. However it is the global trend not to wear their traditional folk costume. And so, the number of people wearing Han-bok, our traditional folk costume is also getting gradually decreased in Korea. For Han-style Promoting Project in the future, it is one of the most efficient way for the middle and high school students to motivate and increase the interest about Han-style and Han-bok as the middle and high school uniforms. Adolescent middle and high school students think very important their appearance. Especially, Korean middle and high school students spend a lot of time in school, and so school uniforms are very influential in their mental and physical aspects. Fabrics for this study, they were woven twill with 3 kinds of fabric patterns from the motif of Baekje relics. The colors of fabrics is the blue and brown used in general school uniform, the yellow and red used in Han-bok. Considering the school uniforms, fabric patterns adapted the similar color matching method for not to be found cleary and designed the fabric pattern's one-repeat size is $4{\times}4cm$.

• 패션비즈니스
• /
• 제21권2호
• /
• pp.78-90
• /
• 2017

In this study, brassiere prototype was developed for attaching the measuring module of ECG measurement and body movement while sleeping. For ECG measurement, textile electrodes was made of stretch fabric containing polyurethane in consideration of elasticity of brassiere band. It was used as a conductive yarn by silver coating on the warp. The textile electrodes was woven with twisted twill to increase the density of conductive yarns. The pressure of the brassiere band was enough to sensing stably the ECG, and the elastic band of the brassiere was designed to be wider than 3cm to install the textile electrodes inside, so that textile electrodes was close fitting to the skin at a constant pressure without lifting. The textile electrodes coated with silicon on rear was attached to brassiere elastic band, and the module was installed with a snap connector to textile electrodes of brassiere band. The module was suitable to monitering ECG measurement of a typical R peak, pulse rate and body movement while sleeping without interfering.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.10-19
• /
• 1993

Broad, mercerized broad, mercerized twill cotton fabrics and rayon fabric were treated with cellulase for 30~480 minutes at different temperature, concentration, time, and also treating methods such as continuously-treated or repeatedly-treated, and dyed with two direct dyes before or after enzyme treatment. From the experimental result by treating under the various conditions above, it was obtained that the weight loss increased more in thin fabric than thick one. In addition, it was considered that the treatment in 5$0^{\circ}C$ for 240 minutes brought about the ideal weight loss and flexible hand of the specimens. For both broad and mercerized broad, repeated treatment showed more weight loss than continuous. Direct dye on cotton fabric apparently inhibited hydrolysis. Ionic surfactants showed the inhibition effect of the catalytic hydrolysis of enzyme, on the other hand, nonionic surfactant did not.

• 한국의류학회지
• /
• 제9권1호
• /
• pp.47-55
• /
• 1985

To determine the change of the mechanical properties of the wool/polyester blend fabrics in proportion to blend ratio, 10 mechanical properties were measured on 6 blend fabrics by KES-F system. Blend ratio on the 6 blend fabrics was increased by $20\%$, and the structure of the fabric were plain, 2/2 twill, respectively. And wearing performances in propoetion to blend ratio on the 6 blend fabrics were investigated. In this experiment. the following conclusions were obtained with the increase of blend ratio of polyester. 1) The values of WT, RT in tensile properties. tensile energy and elongation, and RC in compressional properties were decreased. 2) The values of B, 2HB in bending properties, 2HG. 2HG 5 in shearing properties were increased. 3) Putting on clothes, wearing performance was bad because crumbling of shape and wrinkle were easily made an appearance. Particularly it was remarkably bad as blend ratio of polyester was expressed $60\%$.

• 한국의류학회지
• /
• 제22권5호
• /
• pp.565-574
• /
• 1998

The purpose of the study was to determine the effect of air velocity on the thermal resistance of wool ensembles. Three suits for men with different weaving structure and density were made with the same design and size for the study. In addition, Y-shirt, underwear, and socks were prepared for constructing the ensembles. Thermal insulation of air layer and 3 ensembles were measured by using thermal manikin in environmental chamber controlled at 2$0^{\circ}C$ and 65% RH with various air velocity. The results were as follows: 1. Thermal resistance of air layer was 0.079 m2.$^{\circ}C$/W with no air velocity(less than 0.2m/sec). 2. Thermal resistance of air layer decreased with increasing the air velocity rapidly. When the air velocity was 0.25 and 2.89 m/sec, the decreasing rate was 15% and 61%, respectively compared with no air velocity. 3. While there was little difference among the effective thermal insulation of 3 ensembles having different weaving structure and density with no air velocity, there was sharp difference among them when the air velocity increased. That is, the decreasing rate of effective thermal insulation of the ensemble which has higher air permeability was higher. 4. The decreasing rates of the effective thermal resistances of plain, twill and satin ensemble were 61, 54, and 49%, respectively when the air velocity was 2.89 m/sec which was a maximum air velocity in this study.