• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.15-19
• /
• 2001

The purpose of this study was to determine the thermal characteristics of men's suits ensembles and their fabrics. For the study, 100% wool fabrics were woven with various fabric structure, fabric density and yam count and With the use of these, 12 men's suits were made with the same design. Physical characteristics that affect thermal transport properties, including drapery, cover factor; bulk density, keeping warmth ratio, vapor permeability, air permeability and porosity of the fabrics were measured. In addition, thermal resistance of men's suit ensembles, including Y-shirts, inner wear and socks was measured on the thermal manikin in the environmental chamber. The result of the study was as follows: 1. In terms of fabric structure, keeping warmth ratio of plain woven fabrics was higher than those of twill and satin woven fabrics and also, vapor and air permeability and porosity of plain woven fabrics were higher than those of twill and satin woven fabrics. 2. The result showed that thermal resistance of 12 ensembles were in the range of 0.77clo~0.97clo. 3. There was little correlation between woven condition such as, including structure, fabric density and yam count and thermal resistance of ensembles.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.45-52
• /
• 2005

The optimum fabric design plan is recently needed with the relevant fabric shrinkage in dyeing and finishing processes for the various sensible fabrics for garment. For responding this need, the difference of fabric design plan such as fabric density, yarn count and finishing shrinkage has to be surveyed with weaving looms such as water jet, air-jet and rapier looms, and also has to be analysed with weave pattern such as plain, twill and satin according to the fabric manufacturers. Therefore, in this study, 420 polyester weave pattern sheets are collected from 5 fabric manufacturers, and the weave density coefficients of these fabrics are calculated using yarn count, fabric density and 1 repeat weave pattern. These weave density coefficients are analysed according to the fabric manufacturers, weaving looms and various weave patterns. And also the weave density coefficients of 420 polyester fabrics are analysed with finishing shrinkage according to the fabric manufacturers and various weave patterns such as plain, twill and satin fabrics.

• 한국생활과학회지
• /
• 제11권3호
• /
• pp.263-271
• /
• 2002

This research was designed to investigate the preference to textiles for shirts of college students. 105 subjects majored in fashion design were surveyed and SPSS WIN 11.0 program was used for statistical analysis. The results of this study were as follows: 1. Design was the primary factor in purchasing a clothing and college students considered color and texture as important factors for clothing materials. 2. There were significant differences in preference to textiles for winter shirts, especially grade and resident area. 3. College students preferred plain wool two and two check foremost as a textile for spring and fall. 4. Plain cotton poplin was the most preferred material for summer. 5. Twill cotton drill was the most preferred textile for winter. 6. Textiles for winter were thicker and heavier than others and natural fiber were preferred such as cotton and wool. 7. Plain weave was preferred for spring. fall and summer, and twill weave for winter. 8. College students preferred plain texture foremost and blue shaded light color was preferred for spring. fall and summer and brown shaded dark color was for winter.

• 한국재료학회지
• /
• 제4권3호
• /
• pp.339-348
• /
• 1994

탄소/페놀릭 복합재의 삭마 미세구조와 특성에 대하여 설명하였다. 삭마현상은 추진제와 산화제 사이의 반응에 의한 수증기와 탄산가스의 몰분율에 의해 좌우된다. 그러나, 이 연구논문은 삭마현상이 탄소섬유의 직조형태, 직조밀도, tow크기에 의해서도 변화될 수 있음을 주사전자현미경, 밀도, 열전도도. 삭마표면등을 통해 설명했다. 3가지의 직조형태중, 3K8HS 직조구조가 3K twill구조나 12K8HS구조보다 우수한 내삭마성을 보임을 설명했다.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1282-1291
• /
• 2004

Kenaf was cultivated and harvested in large quantity in Cheju Island and Chinju, Kyungsangnamdo. It was chemically rotted with 3% NaOH for 60 minutes at 100$^{\circ}C$, neutralized using 1% acetic acid, washed and dried, and obtained 40kg of dry kenaf fiber. Kenaf 15/rayon 85, flax 15/rayon 85, and rayon 100% yam was spun and the physical characteristics were measured. Plain weave and twill weave fabrics were made using each of the above yarns as the filling yam. Cotton 100% yam was used as the warp yam in all fabrics. Kenaf/rayon blend yarns were higher in tenacity and elongation, lower in yam uniformity, higher in the number of nep than the flax/rayon blended yams. Kenaf/rayon blend fabric had higher tenacity and elongation compared to the flax/rayon blend fabric Kenaf/rayon blend fabric was most stiff in both plain weave and twill weave fabrics whereas drape characteristics was dependent upon the fabric structure of the kenaf/rayon blend and flax/rayon blend. There were little differences between the kenaf/rayon blend fabric and the flax/rayon blend fabric in the Kawabata physical measurements and the PHVs. The only drawback of kenaf fiber was it's surface roughness and it is expected that it can be improved by enzyme retting and mechanical bundle separation.

• 복식문화연구
• /
• 제10권5호
• /
• pp.532-541
• /
• 2002

An empirical review on silk fabrics of the Chosun period showed that they varied in kind and design according to their uses. Thus the purpose of this study is to classify the fabrics into excavated and temple fabrics according to their uses and collected places and then to examine characteristics of each type. Excavated fabrics were most accounted for by tabby fabric, followed by satin, twill, leno and gauze and union cloth. Tabby fabric was most used throughout the Chosun period, followed by satin. This is supported by many literary records. Concerning excavated dresses of the same period, tabby fabric, especially Ju was the main material, followed by satin. Leno and gauze fabric was much less used than in the Koryo period. Among excavated dresses surveyed in this study, none was made of compound woven fabrics such as Brocade. Other excavation reports said that Brocade had been used for a cuff of coat in few cases, if any. Tabby fabric was widely used for both the right side and lining while twill and satin fabrics were mainly adapted to weave the right side because they had luster higher than the former, smooth sense of touching and unique designs.

• 대한가정학회지
• /
• 제40권7호
• /
• pp.15-24
• /
• 2002

In this work, the effect of fusible interlining on the appearance related properties and mechanical characteristics of Lyocell fabric after fusing was investigated. Two different types(20's and 10's) of Lyocell face fabric with six different interlining(by thickness and structure) for earth Lyocell fabric were examined. In order to establish the optimum fusing condition for the different face fabric and interlining, peel strength of each fused fabric was measured, which was dependent on the fusing temperature, pressure, and time. The characteristics related appearance and mechanical characteristics of each fused fabric were determined. The results are as follows: The peel strength was excellent, when the fabric was fused with the force of 3kgf/$textrm{cm}^2$ at $120^{\circ}C$ for 15seconds. Flex stiffness, G, 2HG, 2HG5(shear), B, 2HB(bending) of 100% Lyocell fabric 10's were higher than those of 100% Lyocell 20's. Flex stiffness, crease recovery, G, 2HG, B, 2HB of thicker woven interlining were higher than those of thinner woven interlining. Crease recovery of twill interlining were higher than those of plain interlining. In case of shear and bending properties, however, plain interlining was higher than twill interlining. Flex stiffness, crease recovery, G, 2HG, 2HG5, B, 2HB of nonwoven interlining were higher than those of woven interlining. In case of drapability, however, woven interlining was higher than nonwoven interlining.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.1-6
• /
• 2019

Carbon fiber has excellent specific strength, corrosion resistance and heat resistance. And p-Aramid fiber has high toughness and heat resistance and high elasticity, and is used in various fields such as industrial protective materials, bulletproof helmets and vests, as well as industrial fields. However, carbon fiber is relatively expensive, and is susceptible to brittle fracture behavior due to its low fracture strain. On the other hand, the aramid fiber tends to decrease in elastic modulus and strength when applied to the epoxy matrix, but it is inexpensive and has higher elongation and fracture toughness than carbon fiber. Thus the twill hybrid carbonaramid fiber reinforced composite laminate composite was investigated for a delamination fracture toughness under Mode I loading by 2 kinds of MBT and MCC deduction. The specimen was fabricated with 20 hybrid fabric plies. The initial crack was made by inserting the teflon tape in the center plane with a₀/W=0.5 length. The results show that SERR(Strain Energy Release Rate) as the critical and stable delamination fracture toughness were 0.09 kJ/㎡, 0.386 kJ/㎡ by MBT deduction, and 0.192 kJ/㎡, 0.67 kJ/㎡ by MCC deduction, respectively.

• 복식
• /
• 제62권3호
• /
• pp.137-151
• /
• 2012

In 1966, $Seokgatap$ pagoda in $Bulguksa$ temple was damaged by the tomb robbers and was dismantled to fix the damage. In the process, many offerings to Buddha and containers for Sarira(the cremated remains) were found in $Sarigong$(specially designated space for the Sarira casket) inside the second floor of the pagoda. Many fabrics like $Geum$, $Neung$(twill), $Rha$(complex gauze), silk tabby and linen were also excavated. In this study, $Geum$ fabric from the $Seokgatap$ was closely examined. $Geum$ of $seokgatap$ is weft-faced compound weave according to the analysis of its weaving pattern which was wrongly presumed as warp-faced compound weave for some time. Technical analysis of $Geum$: Main: silk, Binding: silk, Proportion: 1 main warp to 1 binding warp, Count: 15 main warps and 15 binding warps per centimeter, Weft: polychrome silk without apparent twist, Colors: yellow, mustard yellow, deep blue, green and purple, Weave: weft-faced compound twill, 1/2 S. $Geum$ of $Seokgatap$ was made in the $8^{th}$ century, since it was weaved in weft-faced compound weave twill which was popular in the $8-9^{th}$ century. And also, the arrangement of the colors was done in the same way of gradation $Geum$ silk which was popular in the $7-8^{th}$ C in China and Japan. Third, we restored the pattern of $Geum$ of the Unified Shilla Dynasty for the first time. It was very difficult to figure out the shape and the size of pattern since the fabric was partially lost and ruined. We tried to draw the diagram of structure with the cross point of the warp and the weft to restore the pattern. By doing so, we could identify two kinds of small flower pattern, palmette and the pattern of repeating vines. Fourth, we could infer that the $Geum$ of $Seokgatap$ was used for $geumdae$(a pouch made of $geum$) by analyzing all the documents and the characteristics of the fabric.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.171-172
• /
• 2003

직물의 외관 품위는 직물의 촉각뿐만 아니라 시각적인 자극에 의해서 크게 결정된다. 견직물이나 양모직물의 광택 등 자연스러운 광학적 특성은 특히 구성 섬유의 특성이나 구성사의 구조, 직물 조직 등과 밀접한 관계가 있는데 그 중 섬유단면형태가 가장 중요한 인자라고 할 수 있다. 따라서 단면형상에 따른 직물의 외관 감성 특히 시각특성에 미치는 영향을 알아보기 위하여 직물의 광택도를 측정하였다. 그 결과 섬유 단면의 요철이 많으면 광택도가 감소하면 섬유단면이 매끈한 부분이 많은 섬유는 광택도가 증가하였다. 그러나 이섬도 혼섬단면사로 구성된 직물은 광택이 우수하면서 은은함을 부여해주었다.