• 소성∙가공
• /
• 제12권6호
• /
• pp.558-565
• /
• 2003

Rotary swaging is one of the incremental forming process which is a chipless metal forming process for the reduction of cross-sections of bars, tubes and wires. In the present work, the rotary swaging machine and dies were designed to investigate the formability of TDS(Tube Drive Shaft) used in automotive industry. The process variables such as the speed of forming, the shape of the formed materials and the reduction of area were also estimated to study experimental analyses of rotary swaging process using the materials of 34Mn5 and S45C. From experimental results, it was found that the process variables affected the quality of TDS in terms of hardness, the precision of products and the surface roughness. The hardness after swaging approved to be Increased with the increase in the reduction of diameter. And it was found that the grain size became smaller and the elongated grains were formed in the axis direction.

• KIEAE Journal
• /
• 제2권3호
• /
• pp.33-38
• /
• 2002

The intermediate range of temperatures($100{\sim}300^{\circ}C$) which can be achieved with CPCs(Compound Parabolic Concentrators) without tracking device provides both economic and thermal advantages for solar collector design. The present paper summarizes critical design considerations for CPC with cylindrical absorber and its optical performance using ray tracing program. Concentration ratios vary as acceptance half angle, ratio of reflector height to aperture width and ratio of reflector area to aperture area. This effects showed that the concentration ratio was increased as acceptance angle but optimum ratio of reflector height to aperture width existed at critical value. As a result of ray tracing, solar ray losses was maximized at acceptance half angle and this problem was solved by increasing absorber tube diameter. The concentrating flux distribution on the absorber surface was uniform but peak flux existed.

• 한국레이저가공학회지
• /
• 제5권2호
• /
• pp.17-22
• /
• 2002

Characteristics of micro carbon structures fabricated with laser-induced chemical vapor deposition (LCVD) are investigated. An argon ion laser (λ＝514.5nm) and ethylene gas were utilized as the energy source and precursor, respectively. The laser beam was focused onto a graphite substrate to produce carbon deposit through thermal decomposition of the precursor. Average growth rate of a carbon rod increased for increasing laser power and pressure. Micro carbon rods with good surface quality were obtained at near the threshold condition. Micro carbon rods with aspect ratio of about 100 and micro tubular structures were fabricated to demonstrate the possible application of this method to the fabrication of three-dimensional microstructures. Laser Raman spectroscopic analysis of the micro carbon structures revealed that the carbon rods are consisting of amorphous carbon.

• Animal cells and systems
• /
• 제11권2호
• /
• pp.141-146
• /
• 2007

Cantharidin is produced by blister beetles (Coleoptera: Meloidae) and smaller oedemerid beetles (Coleopetra: Oedemeridae) and is found in hemolymph and various tissues. The function of cantharidin in the courtship behaviour of meloids had never been fully established. Our studies show a correlation between density of cuticular pores and cantharidin titre of the scape and pedicel segments of male specimens of the East African species of Epicauta nyassensis (Haag-Rutenberg, 1880) (Coleoptera: Meloidae). Light microscopy of semi-thin cross sections of the male scape and pedicel indicates that there are many canal shaped structures that stretch from the antennal hemolymph to the antennomere surface. These structures may be tubules, which transport cantharidin circulating in the hemolymph to the surface, where the compound can be released via cuticular pore openings. Analyses of the head capsule and antennal segments of E. nyassensis females which had been copulated with males revealed low titre of cantharidin in the first two antennal segments. The density of the scape and pedicel pores of females was to some extent higher than the density of these pores on flagellum; however it was considerably lower than that of the males. Interestingly, no tubular cell or other transport structures were found in the cross sectioning of the female antennomeres or on the integument surface. During mating, male antennomeres, as well as cantharidin containing pores which are located on the $1^{st}\;and\;2^{nd}$ antennomeres, come into direct contact with the female antennae and may release cantharidin to their surface. Female E. nyassensis may be able to discriminate the opposite sex with abundant reserves of cantharidin prior to mating. This is another evidence that cantharidin function in close range sexual selection.

• 대한치과의사협회지
• /
• 제48권2호
• /
• pp.106-112
• /
• 2010

아직까지 나노관련 기술이 티타늄 임플란트에 직접적으로 사용되는 부분이 상당히 미약하다. 하지만, 수직으로 정렬된 구조를 가지는 티타니아 나노튜브는 생체 내 대부분의 임플란트 재료로 사용되는 티타늄의 차세대 개발에 있어서 가장 중요한 영향을 미칠 것이다. 본문에 설명되어 있는 내용들 뿐 만이라, 티타니아 나노튜브는 파골세포의 골 흡수성 방지, 줄기세포의 특정 성체세포로의 분화, 연골세포의 재분화, 간세포를 이용한 생물 반응기(bio-reactor) 개발 등 생체재료의 여러 분야에서 많이 연구되고 있다. 특히, 줄기세포에 관한 연구는 차세대 임플란트 개발에 있어서 가장 중요한 연구 분야 중의 하나로서, 골을 형성하는 조골세포와 골을 파괴하는 피골세포 모두 줄기세포 로부터 만들어진다는 것을 유념해야 할 것이다. 만약, 티타니아 나노튜브의 독특한 나노구조를 이용하여 줄기세포의 조골세포로의 직접 분회를 제어하는 기술이 개발되어 상업화된다면, 이 기술을 기반으로 하여 현 재까지 개발된 모든 표면 증착 및 코팅 기술을 새롭게 이용하는 차세대 티타늄 임플란트의 개발을 위한 초석이 되리라고 본다.

• 정보과학회 논문지
• /
• 제43권4호
• /
• pp.419-429
• /
• 2016

최근 관상동맥 영역화 결과로부터 삼차원 표면 모델을 생성함으로써 혈관 구조적 정보의 렌더링 효율성의 증대뿐만 아니라 전산유체역학를 이용한 혈류 역학 시뮬레이션을 통해 혈류분획예비력과 같은 생리적 정보들을 획득하는 연구들이 활발히 진행되고 있다. 본 논문에서는 혈관 영역화 과정에서 획득한 혈관 구조 정보를 입력 데이터로 사용하여 관상동맥의 삼차원 삼각 표면 메쉬 모델을 생성하는 방법을 제안한다. 관상동맥 영역화 결과로부터 삼각형 표면 메쉬 모델을 만드는 방법으로는 Marching cube 알고리즘에 기반한 방법들이 있지만 이산적인 영상 공간에서 수행되는 알고리즘으로 가늘고 다양한 굴곡을 갖는 혈관 경계를 표현하기 힘들다. 제안된 방법은 관상동맥 영역화 과정에서 추정한 혈관 중심좌표와 법선 벡터 그리고 직경 정보를 이용하여 기존 방법들보다 정교하게 단일 혈관 가닥들에 대한 삼각 표면 메쉬들을 생성하고 분기가 일어나 중첩되는 메쉬들은 메쉬 병합 기법을 사용하여 처리함으로써 통합된 관상동맥 메쉬를 생성한다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.104-114
• /
• 1992

The purpose of this study was to evaluate the shear bond strength of glass ionomer cement(Ketacfil, ESPE, Co.) against dentin surface which had been treated with surface conditioning agents(distilled water, 5% sodium hypochlorite solution, Ketac - conditioner, 40% polyacrylic acid). In this study, 60 human molars with sound and healthy crown portion which were previously extracted for orthodontic or periodontal problem. The dentin surfaces of these teeth were exposed with wet trimmer and polished with 150 - grit and 600 - grit silicon carbide paper and the teeth were divided into four groups(15 teeth per group) according to the following surface conditioning methods. Group I : Surface treatment with distilled water as control group. Group II : Surface conditioning with 5% sodium hypochlorite solution. Group III : Surface conditioning with Ketac conditioner. Group IV : Surface conditioning with 40% polyacrylic acid. The shear bond strengths were measured by Autograph(Shimatzu Co. Japan). The result of the evaluations were then subjected to statistical analysis using one - way analysis of variance and Duncan test and the results were as follows : 1. The shear bond strength accrding to the dentin surface conditioning conditions was highest in Ketac conditioner group, with measurements of $44.44{\pm}0.74(kg/cm^2)$ and lowest in the distilled water group, with measurements of $28.84{\pm}0.88(kg/cm^2)$. 2. Statistically significant differences were found between surface conditioning with 5% sodium hypochlorite solution group or Ketac conditioner group and distilled water group(P<0.01). 3. Also, statistically significant difference was found between surface conditioning with distilled water group and 40% polyacrylic acid group(P<0.05). 4. Overall difference in statistical significance between the groups was not found (P<0.05). 5. Fractured dentin surface treated with conditioning solutions showed cohesive fracture. 6. Distilled water group and 5% sodium hypochlorite solution group removed the smear layer less effectively. 7. Conditioning dentin with Ketac conditioner and 40% polyacrylic acid resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권4호
• /
• pp.295-307
• /
• 2006

Styela clava, called non-native tunicate or sea squirt, is habitat which include bays and harbors in Korea and several sites in the sea faced world. We fabricate cellulose membrane nerve conduit (CMNC) from this native sea squirt skin, and evaluate the capacity of promoting peripheral nerve regeneration in the rat sciatic nerve defect model. After processing the pure cellulose membrane from the sea squirt skin as we already published before, CMNC was designed as a non-tubular sheet with 14 mm length and 4 mm width. Total eleven male Spraque-Dawley rats (12 weeks, weighing 250 to 300g) were divided into sham group (n=2), silicone tube grafted control group (n=3) and experimental group (n=6). Each CMNC grafted nerve was evaluated after 4, 8 and 12 weeks in the experimental group, and after 12 weeks, sciatic function was evaluated with sciatic function index (SFI) and gait analysis, and histomorphology of nerve conduit and the innervated tissues of sciatic nerve were all examined using image analyzer and electromicroscopic methods in the all groups. The regenerated axon and nerve sheath were found only in the inner surface of the CMNC after 4 weeks and became more thicker after 8 and 12 weeks. In the TEM study, CMNC grafted group showed more abundant organized myelinated nerve fibers with thickened extracellular matrix than silicone conduit grafted group after 12 weeks. The sciatic function index (SFI) and ankle stance angle (ASA) in the functional evaluation were $-47.2{\pm}3.9$, $35.5^{\circ}{\pm}4.9^{\circ}$ in CMNC grafted group (n=2) and $-80.4{\pm}7.4$, $29.2^{\circ}{\pm}5.3^{\circ}$ in silicone conduit grafted group (n=3), respectively. And the myelinated axon was 41.59% in CMNC group and 9.51% in silicone conduit group to the sham group. The development of a bioactive CMNC to replace autogenous nerve grafts offers a potential and available approach to improved peripheral nerve regeneration. As we already published before, small peptide fragment derived from the basement membrane matrix proteins of squirt skin, which is a kind of anchoring protein composed of glycocalyx, induced the effective axonal regeneration with rapid growth of Schwann cells beneath the inner surface of CMNC. So the possibilities of clinical application as a peripheral nerve regeneration will be able to be suggested.

• 한국입자에어로졸학회지
• /
• 제8권4호
• /
• pp.173-180
• /
• 2012

SiC particles, 8.3 ${\mu}m$ in volume average diameter, were chlorinated in an alumina tubular reactor, 2.4 cm in diameter and 32 cm in length, with reactor temperature varied from 100 to $1200^{\circ}C$. The flow rate of the gas admitted to the reactor was held constant at 300 cc/min, the mole fraction of chlorine in the gas at 0.1 and the reaction time at 4 h. The chlorination was negligibly small up to the temperature of $500^{\circ}C$. Thereafter, the degree of chlorination increased remarkably with increasing temperature until $900^{\circ}C$. As the temperature was increased further from 900 to $1200^{\circ}C$, the increments in chlorination degree were rather small. At $1200^{\circ}C$, the chlorination has nearly been completed. The surface area of the residual carbon varied with chlorination temperature in a manner similar to that with the variation of chlorination degree with temperature. The surface area at $1200^{\circ}C$ was 912 $m^{2}/g$. A simple model was developed to predict the conversion of a SiC under various conditions. A Langmuir-Hinshelwood type rate law with two rate constants was employed in the model. Assuming that the two rate constants, $k_{1}$ and $k_{2}$, can be expressed as $A_{1e}^{-E_{1}/RT}$ and $A_{2e}^{-E_{2}/RT}$, the four parameters, $A_{1}$, $E_{1}$, $A_{2}$, and $E_{2}$ were determined to be 32.0 m/min, 103,071 J/mol, 2.24 $m^{3}/mol$ and 39,526 J/mol, respectively, through regression to best fit experimental data.

• Journal of Periodontal and Implant Science
• /
• 제29권4호
• /
• pp.847-863
• /
• 1999

The present study was performed to evaluate the effect of EDTA on diseased root surfaces with regard to the removal of the smear layer, exposure of dentinal tubule openings, and demineralization of the peritubular dentin. 20 periodontally involved single rooted teeth were used. After scaling and root planing, root conditioning was carried out with 3%, 17%, and 24% EDTA solution for 20 sec., 3 min., and 5 min. respectively. Then, the specimens were rinsed with tap water for 5 min. and processed for scanning electron microscopic observation. The following results were obtained. 1. In control group which was conditioned with cotton pellets soaked with saline for 3 min., the surface showed an amorphous irregular coating. The tubule orifices seemed to be com-pressed in the direction of the curette strokes. 2. In test group which was conditioned with EDTA solution, the number of opening dentinal tubules and the extent of the dentinal tubule opening increased with time irrespective of the concentration of EDTA solution. 3. In the group which was conditioned with EDTA solution for 20 sec., the smear layer was not completely removed. 4. If the time of root conditioning is above 3 min., collagen-like fibers covering the circum tubular dentin surface were shown even in the group which was conditioned with 3% EDTA solution. In conclusion, EDTA solution was a very effective root conditioning agent like low pH root conditioning agents which had various disadvantages. Therefore, using EDTA solution, more successful periodontal regeneration could be obtained.