• 대한조선학회지
• /
• 제27권1호
• /
• pp.17-23
• /
• 1990

세장비가 작은 구조부재는 충돌과 같은 상황하에서 압축을 받는 경우, 축방향으로 접혀지는 소성 변형에 의해서 충돌에너지의 대부분을 흡수한다. 이 경우, 관성을 무시한다 하더라도 연강 부재의 정적인 하중에 대한 압괴강도에 비해서 변형률에 의한 영향으로 인해 동적 압괴 강도가 높아진다는 것은 잘 알려진 사실이다. 본 논문에서는 부재의 정적 하중에 대한 압괴강도 추정법을 소성변형의 운동학적 방법을 이용하여 수행하였다. 종래의 항복하중에 변형률을 고려한 동적 압괴 하중 추정치가 동적 영향을 과대평가하게 되므로 평균 소성변형 응력의 변형률에 대한 영향을 고려하여 튜브부재의 동적 압괴 강도 추정을 유도하였고, 이를 발표된 실험결과와 비교 검토하였다. 본 연구에서 얻은 만족스러운 결과를 토대로 하여 앞으로 이 방법을 선박의 충돌시 선수구조의 충돌에너지 흡수의 추정에 적용시킬 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.688-693
• /
• 2007

Nowadays various studies related with superstructure of bridges are developed and they pursuit more effective section of bridges superstructure, material and economical application of composite materials. CFT structure(Concrete Filled Steel Tubular Structure) is developed type of composite structure that concrete is filled with steel box, and the deformation of the member, stiffness and internal force will be improved by confinement effect of steel box and concrete. This paper introduces new type of girder, CFTA girder( Concrete- Filled and Tied Steel Tubular Arch Girder) which is combined with traditional CFT structure,arch effect and prestress through carrying out the structural analysis by computer programs. The computer programs which is used are ABAQCS and MIDAS, and the 12.2m girder which is applied same load and prestresses is analyzed and compared the results respectively.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.171-180
• /
• 1994

Full scale structural test of 765kv electric transmission tower was performed to measure the stresses and displacement of towers under the design loadings, and the results were compared with analytical results based on three dimensional frame analysis. Also, the actual ultimate strength of the tower was measured through destructive test. Especially, to predict the behavior and failure of the connection of tubular member, finite element analysis was performed and compression test for the segments of tubular member were carried out. Valuable information for the overall and local behavior of the tower was obtained and reliability of current analytical method was confirmed.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.116-124
• /
• 1988

해양구조물의 원통조인트에 대한 피로 수명 산출이 전통적으로 실험적 방법에만 의존해 왔음은,원통조인트의 구조가 복잡하여 용접부위 균열의 응력확대 계수 계산이 거의 불가능 했든 것이 주 원인이었다. 최근에 유한요소 3차원 모델을 이용한 계산방법이 개발되어 심히 구조적으로 복잡한 표면 균열의 응력확대계수 산출이 용이하게 되었다. 해양 구조물의 원통조인트에 대한 피로 수명 산출법을 개발하기 위한 연속되는 3부작의 제1부로서 본 논문은 X형 원통 조인트 용접주위 표면 균열의 응력확대 계수 거동을 분석하고 있다. 분석결과를 이용하여 응력확대계수를 엄격한 방법에 의해 계산하였다. 계산된 응력확대계수를 구조적인 관점에서 해석하고 있다.

• Computers and Concrete
• /
• 제26권4호
• /
• pp.343-350
• /
• 2020

Concrete-filled steel tubular (CFST) members have been widely used in engineering, and their tube diameters have become larger and larger. But there is no research on the thermal field of large-diameter CFST structure. These studies focused on the thermal field of the large-diameter CFST structure under solar radiation. The environmental factors and the actual placement position were considered, and the finite element model (FEM) of the thermal field of CFST members under solar radiation (SR) was established. Then the FEM was verified by practical experiments. The most unfavorable temperature gradient model in the cross-section was proposed. The testing results showed that the temperature field of the large-diameter CFST member section was non-linearly distributed due to the influence of SR. The temperature field results of CFST members with different pipe diameters indicated that the larger the core concrete diameter was, the slower the central temperature changed, and there was a significant temperature difference between the center and the boundary. Based on the numerical model, the most unfavorable temperature gradient model in the section was proposed. The model showed that the temperature difference around the center of the circle is small, and the boundary temperature difference is significant. The maximum temperature difference is 15.22℃, which appeared in the southern boundary area of the specimen. Therefore, it is necessary to consider the influence of SR on the thermal field of the member for large-diameter CFST members in actual engineering, which causes a large temperature gradient in the member.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.100-109
• /
• 2021

본 연구에서는 부식에 의하여 발생하는 표면 단면손상을 고려하여 인위적인 표면 단면손상이 도입된 원형인장 부재의 인장성능 변화를 평가하였다. 인장성능 평가를 위하여 부식수준에 따른 인위적인 단면손상을 손상 폭과 높이를 변화시켜 원형강관 시험체 표면에 도입하였으며, 단면손상 수준에 따른 인장성능 변화를 평가하였다. 인장강도 실험 결과, 원형단면 강관부재의 인장강도는 강관부재의 길이 방향 손상이 아닌 부재 둘레 방향 손상의 영향을 받는 것으로 나타났으며, 부재의 파괴는 손상이 발생한 부재의 최소 단면에서 발생하는 것으로 나타났다. 표면에 불규칙한 손상이 도입된 강관 시험체의 단면조건을 명확하게 평가할 수 없으므로, 단면손상으로 인한 인장강도 변화를 정량적으로 비교하기 위하여 동일 단면 감소효과가 고려된 강관 부재에 대한 비선형 구조해석을 실시하였다. 비선형 구조해석 결과, 실제 부재 표면에 국부적 단면손상이 발생한 부재의 인장강도는 동일 단면 감소효과를 고려한 부재의 인장강도에 비하여 상대적으로 급격하게 저하하는 것으로 평가되었다. 국부부식과 같이 표면에 불규칙한 단면손상이 발생한 부재의 잔존인장성능은 인장시험과 등가손상 단면과 구조해석 결과로부터 평가된 상관계수를 이용하여 평가 및 예측될 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.569-583
• /
• 2019

Tubular steel sections are widespread all over the world because of their strength and aesthetic appearance. Tubular steel members may exhibit local buckling such as elephant foot or overall buckling under extreme compression load. Recently, external bonding of fiber reinforced polymers (FRP) sheets for strengthening these members has been explored through experimental research. This paper presents three-dimensional nonlinear finite element analysis (FEA) to investigate the structural behavior of strengthening tubular steel members with FRP against local and overall buckling phenomena. Out-of-roundness and out-of-straightness imperfections were introduced to the numerical models to simulate the elephant foot and overall buckling, respectively. The nonlinear analysis preferences such as the integration scheme of the shell elements, the algorithm for solution of nonlinear equations, the loading procedure, the bisection limits for the load increments, and the convergence criteria were set, appropriately enough, to successfully track the sophisticated buckling deformations. The agreement between the results of both the presented FEA and the experimental research was evident. The FEA results demonstrated the power of the presented rigorous FEA in monitoring the plastic strain distribution and the buckling phenomena (initiation and propagation). Consequently, the buckling process was interpreted for each mode (elephant foot and overall) into three sequential stages. Furthermore, the influence of FRP layers on the nonlinear analysis preferences and the results was presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.427-430
• /
• 2005

The study for seismic characteristics of square concrete-filled steel tubular (CFT) columns is analytically conducted. For predicting the strength and ductility of CFT columns, fiber analysis technique is used. The analytical results show reasonable agreement with experiment results. The influence of the steel tube on the lateral response of CFT columns is studied for the evaluation of seismic performance.

• 한국전산구조공학회논문집
• /
• 제18권3호
• /
• pp.265-275
• /
• 2005

본 논문의 목적은 내부환보강 X형 관이음부의 거동을 수치적으로 평가하여 환보강재의 보강효과를 규명하고, 강도 산정식을 제안하는 것이다. 축방향력을 받는 관이음부의 정적강도를 산정하기 위해 비선형 유한요소해석을 수행하였다 유한요소해석 결과는 실험결과와 잘 일치하였고, X형 관이음부의 주부재 단부효과를 감소시킬 수 있는 주부재의 적정길이를 제시하였다. 내부 환보강재는 단순 X형 관이음부의 정적강도를 증가시키는데 효율적임이 판명되었고, 최대 보강효과를 나타내는 최대강도비가 1.5에서 3까지 산정되었다. 환보강재의 실용적 크기를 고려한 이음부에 대해 유한요소해석 결과를 이용하여 회귀분석을 실시하고 내부 환보강 X형 관이음부의 강도산정식을 제안하였다.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1525-1540
• /
• 2018

A test rig with multi-functional purposes was specifically designed and manufactured to study the behavior of multi-planar welded tubular joints subjected to multi-planar concurrent axial loading. An experimental investigation was conducted on full-scale welded tubular joints with each consisting of one chord and eight braces under monotonic loading conditions. Two pairs or four representative specimens (two specimens for each joint type) were tested, in which each pair was reinforced with two kinds of different internal stiffeners at the intersections between the chords using welded rectangular hollow steel sections (RHSSs) and the braces using rolled circular hollow steel sections (CHSSs) and welded RHSSs. The effects of different internal stiffeners at the chord-brace intersection on the load capacity of joints under concurrent multi-planar axial compression/tension are discussed. The test results of joint strengths, failure modes, and load-stress curves are presented. Finite element analyses were performed to verify the experimental results. The study results show that the two different joint types with the internal stiffeners at the chord-brace intersection under axial compression/tension significantly increase the corresponding ultimate strength to far exceed the usual design strength. The load carrying capacity of welded tubular joints decreases with a higher degree of the manufacturing imperfection in individual braces at the tubular joints. Furthermore, the interaction effect of the concurrent axial loading applied at the welded tubular joint on member stress is apparent.