• 대한전기학회논문지:전력기술부문A
• /
• 제53권4호
• /
• pp.221-226
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 대한교통학회지
• /
• 제12권1호
• /
• pp.43-54
• /
• 1994

The major concern of this paper is to investigate the properties of a stochastic equilibrium for each model system in terms of a consumer welfare measure. The primary assumption for this study is that a trip-maker would choose the trip from his origin zone which maximizes his personal welfare. This assumption, finally, leads to a singly constrained gravity model. The consumer welfare measure is derived from the concept of expected welfare of randomly sampled trip-makers. Each of the four different models considered in this paper is differentiated depending on the complexity of its model or the definition of its travel function. In this study, three different regions are chosen for the purpose of taking into account the effects of different zone-systems on the properties of a stochastic equilibrium : (i) Archerville region (5 zone) ; (ii) San Francisco Bay regions (30 zones) ; (iii) Houston, TX region (199 zones). It is concluded that almost identical, "global" consumer welfare values can be obtained in some cases of the gravity-type trip distribution models based on a stochastic equilibrium.

• 한국환경교육학회지:환경교육
• /
• 제21권3호
• /
• pp.1-12
• /
• 2008

This study is aimed at suggesting ways to develop field trip or learning materials focusing on environment of Jeju seashore in order to make an effective field trip. To perform these purposes, the contents and concepts were analyzed from environment-related 'geological unit' of elementary science textbook. Afterwards, the places having the geological features in coincidence with them are chosen, and investigated, and these regions can develop into geological teaming places for field trip. Each teaming spot focuses on understanding and finding out the characteristic geological environment of rock shore, gravel shore, sand shore, shellfish shore, and tideland shore among Jeju shores. When field trip is conducted at the preparatory stage, students can get advance knowledge on geological concepts from textbook. The activity record paper is presented at the field trip stage where students observe geological phenomena on their own. After field trip is finished, the summary stage is given to solve some problems on the basis of the observed contents. The developed data from this research have its regional limits, but is surely useful for teachers who try to plan field trip when they especially choose the right field trip spots, or plan to make the process for field trip preparation of the environmental education. Furthermore, with this survey and activities, students can take the chance to improve the learning effect through their own experience on environment of Jeju seashore.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.81-86
• /
• 2010

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

• 대한교통학회지
• /
• 제26권6호
• /
• pp.7-15
• /
• 2008

기존의 아세안지역 국가간 여객통행수요예측에 있어 적용된 방법론은 자료의 한계로 인하여 모형을 이용하기보다는 개략적인 분석방법론과 가정위주로 이루어져 왔다. 본 연구에서는 아세안 지역의 국가간 여객통행 수요예측을 위해 개발된 모형을 제시한다. 통행발생과 통행분포 모형을 개별적으로 추정하기에는 해당지역의 통계자료구축이 미흡한 상태이기 때문에 국가간 출입국 통계자료를 이용하여 통행발생과 통행분포를 동시에 고려하는 직접수요모형을 개발하였다. 또한 현재 연구대상지역의 경우 국가간 통행에 대한 수단선택모형이 존재하지 않기 때문에 본 연구에서는 수단분담율 산정을 위해 명시선호기법을 이용하여 수단분담모형을 추정하였다. 통행거리에 따른 수단선택행태의 차이를 반영하기 위해 세 개의 거리대로 구분하여 수단분담모형을 추정하였다. 추정결과 모형의 설명력과 변수의 유의성 측면에서 대체적으로 양호한 결과가 도출되었다. 본 연구에서 구축한 모형은 향후 아세안지역의 통행수요예측에 있어 참고자료로 활용될 수 있을 것으로 기대된다.

• 열처리공학회지
• /
• 제13권4호
• /
• pp.253-258
• /
• 2000

The present study aimed to develop the TRIP(transformation induced plasticity) aided high strength low carbon steel sheets using reverse transformation process. The cold-rolled 0.14C-6.5Mn steel was reverse-transformed by slow heating to intercritical temperature region and air cooling to room temperature. An excellant combination of tensile strength and elongation of $98.3kgf/mm^2$ and 44.4% appears. This combination comes from TRIP phenomena of retained austenite during deformation. The stability of retained austenite Is very Important for the good ductility and it depends on diffusion of carbon and manganese during reverse transformation. The air cooling after holding at intercritical temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite, resulting the increase of elongation in cold-roiled TRIP steel.

• 한국ITS학회 논문지
• /
• 제19권5호
• /
• pp.119-137
• /
• 2020

공유교통서비스로 상징되는 카셰어링은 청년층을 중심으로 자동차에 대한 인식을 변화시키고 있다. 미래에 공유교통 서비스가 자율주행자동차와 결합하면 공유교통 서비스가 갖는 접근성 문제를 해소 할 수 있으며, 더 나아가 개인 승용차를 위한 주차장을 없애고, 카셰어링 서비스에 기반을 둔 미래형 공동주택 모델도 구상할 수 있다. 이를 위해 본 연구는 미래형 공동 주택 모델의 주요 입주 대상을 청년계층으로 설정하고, 이들의 카셰어링 이용수요 예측과 카셰어링 차량의 통행 처리 효율을 도출하였다. 또한 청년계층이 주로 거주하는 9개 행복주택단지를 선정하여 통행수요를 조사하기 위한 설문조사를 수행하였다. 분석결과 청년계층의 카셰어링 이용 특성과 수요는 수도권과 비수도권에 따라 뚜렷이 구분되었다. 수도권에서는 1일 약 1회, 1회 대여 시 평균 80분 정도 이용하였으며, 8~12시의 오전 시간에 이용하는 경향이 강했다. 반면 비수도권에서는 1일 약 2회, 1회 대여 시 약 200분 이상 장시간 이용하였다. 또한 8~10시의 오전 시간에 집중하기는 했지만, 오후와 저녁 시간에도 이용수요가 높았다. 카셰어링의 통행 처리 효율은 수도권에서는 차량 당 3~4통행, 비수도권에서는 차량 당 2통행 정도로 수도권이 보다 높은 것으로 나타났다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.356-365
• /
• 1999

The present study is aimed at developing the TRIP(transformation induced plasticity) aided high strength low carbon steel using reversion process. An excellent combination of elongation over 40% and tensile strength abut 100kgf/$\textrm{mm}^2$ achieved in processing of 0.15C-0.5 Si-6Mn steel by slow heating to intercritial temperature region and accelerated cooling into room temperature. This good combination is caused by TRIP phenomena of retained austenite in steels during deformation. The stability of retained austenite is very important for the good ductility and it depends on the diffusion of carbon and manganeses during heat treatment. The accelerated cooling after holding at annealing temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite in steel, resulting in the increase in elongation of the cold-rolled TRIP steel. On the other hand, heat treating the steel at 600$^{\circ}C$ for 5 hour before cold rolling increases elongation but reduces the amount of retained austenite after reversion processing. It is accounted that the heat treating is effective for the increase in the stability of retained austenite.

• 한국ITS학회 논문지
• /
• 제17권1호
• /
• pp.55-70
• /
• 2018

최근 공유교통 서비스가 확대되면서 개인교통수단과 대중교통수단을 연계한 통합모빌리티 서비스가 주목을 받고 있으며, 이를 위해서는 연계수단 통행행태 분석이 필수적이다. 본 연구에서는 2010년 서울시 가구통행실태조사 자료를 이용하여 연계수단 통행의 특성을 분석하고, 다항로짓모형을 통해 연계수단 선택에 미치는 영향요인을 분석하였다. 먼저 통행수단을 승용차, 시내버스, 시외버스, 철도, 택시, 기타 등으로 구분하여 25가지의 연계수단 통행유형을 분석하였으며, 이중 시내버스와 철도의 연계통행이 가장 높은 것으로 나타났다. 이들 연계수단 통행은 주로 출근통행목적에서 많이 발생하며, 오전/오후 첨두를 형성하는 것으로 나타났다. 또한 다항로짓모형 추정결과, 개인특성의 성별, 연령, 가구특성의 차량보유여부, 가구소득, 통행특성의 통행목적, 통행시간, 통행거리, 지역적특성의 지하철 및 버스 노선수, 상업용도 면적비율, 토지이용 혼합도, 도착지역의 도심권여부 등이 연계수단 선택에 유의한 영향을 미치는 것으로 나타났다.