• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.4
• /
• pp.221-226
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.4
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.43-54
• /
• 1994

The major concern of this paper is to investigate the properties of a stochastic equilibrium for each model system in terms of a consumer welfare measure. The primary assumption for this study is that a trip-maker would choose the trip from his origin zone which maximizes his personal welfare. This assumption, finally, leads to a singly constrained gravity model. The consumer welfare measure is derived from the concept of expected welfare of randomly sampled trip-makers. Each of the four different models considered in this paper is differentiated depending on the complexity of its model or the definition of its travel function. In this study, three different regions are chosen for the purpose of taking into account the effects of different zone-systems on the properties of a stochastic equilibrium : (i) Archerville region (5 zone) ; (ii) San Francisco Bay regions (30 zones) ; (iii) Houston, TX region (199 zones). It is concluded that almost identical, "global" consumer welfare values can be obtained in some cases of the gravity-type trip distribution models based on a stochastic equilibrium.

• Hwankyungkyoyuk
• /
• v.21 no.3
• /
• pp.1-12
• /
• 2008

This study is aimed at suggesting ways to develop field trip or learning materials focusing on environment of Jeju seashore in order to make an effective field trip. To perform these purposes, the contents and concepts were analyzed from environment-related 'geological unit' of elementary science textbook. Afterwards, the places having the geological features in coincidence with them are chosen, and investigated, and these regions can develop into geological teaming places for field trip. Each teaming spot focuses on understanding and finding out the characteristic geological environment of rock shore, gravel shore, sand shore, shellfish shore, and tideland shore among Jeju shores. When field trip is conducted at the preparatory stage, students can get advance knowledge on geological concepts from textbook. The activity record paper is presented at the field trip stage where students observe geological phenomena on their own. After field trip is finished, the summary stage is given to solve some problems on the basis of the observed contents. The developed data from this research have its regional limits, but is surely useful for teachers who try to plan field trip when they especially choose the right field trip spots, or plan to make the process for field trip preparation of the environmental education. Furthermore, with this survey and activities, students can take the chance to improve the learning effect through their own experience on environment of Jeju seashore.

• Corrosion Science and Technology
• /
• v.9 no.2
• /
• pp.81-86
• /
• 2010

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.7-15
• /
• 2008

Due to the limitations in the statistical data, the existing studies adopted rough methodologies with strong assumptions in the estimation of international passenger travel demand forecast in the ASEAN region. This study aims to develop international passenger travel demand models using scientific methodologies. This study proposes a direct demand model using the immigration and emigration data between countries in the region. This is because of the difficulty of estimating trip generation and trip distribution separately due to the data limitation in the region. As there does not exist the mode choice model for the region, this study estimates a mode choice model using the Stated Preference technique. The mode choice model is separated into three categories of models according to the range of distance between the origin and destination of travel; this is to reflect the different behavior in mode choice according to the travel distance. The result of model estimations suggests that the estimated models produce resonable results statistically. It is expected that the proposed models are useful for the future travel demand estimation in the ASEAN region.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.4
• /
• pp.253-258
• /
• 2000

The present study aimed to develop the TRIP(transformation induced plasticity) aided high strength low carbon steel sheets using reverse transformation process. The cold-rolled 0.14C-6.5Mn steel was reverse-transformed by slow heating to intercritical temperature region and air cooling to room temperature. An excellant combination of tensile strength and elongation of $98.3kgf/mm^2$ and 44.4% appears. This combination comes from TRIP phenomena of retained austenite during deformation. The stability of retained austenite Is very Important for the good ductility and it depends on diffusion of carbon and manganese during reverse transformation. The air cooling after holding at intercritical temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite, resulting the increase of elongation in cold-roiled TRIP steel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.119-137
• /
• 2020

Over the last two decades, the attitudes to cars have changed from buying a car to sharing a car, especially among young people. Shared transport services and autonomous vehicles together can resolve the accessibility issue of shared transport services. Furthermore, they will make it possible to develop a new model of apartments without car parking. Therefore, the study estimated the demand for car sharing by young people and the running efficiency of car-sharing dealing with their car-based trip demand. The study chose nine apartment complexes for study sites where a majority of the residents were young people. The questionnaire survey was conducted to collect data on the trip demands of young people. The results showed that there are significant differences in the car-sharing use patterns and demand between the apartment houses located in the Capital region and non-capital region. Young people living in apartments in the Capital region used car sharing once per day per person for approximately 80 minutes per trip and tended to hire that between 8 AM and 10 AM. On the other hand, the young people living in apartments in the non-capital region used car sharing twice per day per person for approximately 200 minutes per trip. They tended to hire that frequently in the afternoon and evening as well as in the morning. The results also showed that a single car-sharing vehicle could deal with 3~4 trips per day in the Capital region and around 2 trips per day in the non-capital region.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.356-365
• /
• 1999

The present study is aimed at developing the TRIP(transformation induced plasticity) aided high strength low carbon steel using reversion process. An excellent combination of elongation over 40% and tensile strength abut 100kgf/$\textrm{mm}^2$ achieved in processing of 0.15C-0.5 Si-6Mn steel by slow heating to intercritial temperature region and accelerated cooling into room temperature. This good combination is caused by TRIP phenomena of retained austenite in steels during deformation. The stability of retained austenite is very important for the good ductility and it depends on the diffusion of carbon and manganeses during heat treatment. The accelerated cooling after holding at annealing temperature retards the formation of pearlite and provides the carbon enrichment in retained austenite in steel, resulting in the increase in elongation of the cold-rolled TRIP steel. On the other hand, heat treating the steel at 600$^{\circ}C$ for 5 hour before cold rolling increases elongation but reduces the amount of retained austenite after reversion processing. It is accounted that the heat treating is effective for the increase in the stability of retained austenite.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.55-70
• /
• 2018

Recently, as shared transportation services has expanded, integrated mobility services that link personal transportation and public transportation are paid attention. To do this, it is necessary to analyze trip mode chaining behavior. This study analyzed the characteristics of the trip mode chaining behavior using the 2010 travel diary survey in Seoul, and analyzed factors to affect mode choice of trip chaining through the multinomial logit model. The transportation means were classified into passenger cars, city buses, intercity buses, railways, taxis, and others, and 25 trip mode chaining types were identified. Among them, the trip share connected between city bus and railways was the highest. It was also found that the trip mode chaining occurred mainly at commuting and in the morning and afternoon peak. According to the model results, the mode choice of trip chaining is significantly influenced by individual attributes (sex and age), household attributes (car ownership and income), trip attributes (trip purpose, trip time and trip length), and arrival area attributes (number of subway lines and bus lines, ratio of commercial area, land use mix and central region).