• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.483-491
• /
• 2003

Since the red grouper was declared overfished, the Gulf of Mexico Fishery Management Council must prepare a rebuilding plan considering the following alternative management policies: a Total Allowable Catch (TAC), 5-month season closure, 1800-pound trip limit, and a 50-fathom longline boundary. This study was aimed at evaluating the effects of proposed policies for rebuilding the red grouper stock in a 10-year period by developing a bioeconomic model. Under the assumption that the recreation sector was held to its share of TAC (24% of the total quota), the target stock biomass goal was attained in all policies. The NPV was the largest in the 5-month season closure policy if the output price did not fall. There were distributional effects on the different components of the fleets in the 1800-pound trip limit and the 50-fathom longline boundary policy.

• 수산경영론집
• /
• 제35권1호
• /
• pp.1-22
• /
• 2004

Since the red grouper stock was initially declared to be overfished by the NMFS in September 2002, the Gulf of Mexico Fishery Management Council must prepare for the red grouper rebuilding plan considering the following alternative management policies: Total Allowable Catch(TAC), 5 - month season closure, 1800 - pound trip limit, and 50 - fathom longline boundary. The first concern the Council has is to evaluate the effects of recommended policies and the second is to analyze the impact of management policies on yellow edge grouper. This is because the fleets harvest red grouper also catch yellowedge grouper, the regulations on red grouper are likely to allow fishing effort to be distributed into yellowedge grouper. Therefore, this study is aimed at evaluating the biological and economic effects of management policies considering simultaneously the impact of red grouper regulations on yellow edge grouper by developing a combined red grouper and yellowedge grouper bioeconomic model. The overall results indicate that management policies for red grouper would adversely affect the yellowedge grouper stock if yellowedge grouper is not protected by its regulations. The TAC policy has the most serious impact on the yellowedge grouper stock, while the 1800 - pound trip limit policy minimizes the reduction in the yellowedge grouper stock. However, the target stock size of red grouper is achieved as well as the largest net present value of returns is gained in the TAC policy.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.147-152
• /
• 2002

Effect of lip shape on the hole flangeability of high strength steel sheets is investigated. Circular plates of various hole sizes are tested and the variation of lip length as well as the variation of thickness on the sectional views of the finished lip were studied. The conventional hole flanging process is limited to a certain limit hole diameter below which failure will ensue during the hole expansion. The intention of this work is to examine the effect of lip shape on the flangeability of TRIP steel and Ferrite-Bainite duplex steel and find out major parameters which can affect flanging shape of high strength hot rolled steels. Over the ranges of conditions investigated, the minimum hole diameter of F+B steel is better than TRIP steel. while, the lip-shape accuracy of TRIP steel is better than that of F+B steel. although the tensile strength and elongation of %P steel are superior than those of Ferrite-Bainite duplex steel, the flangeability is found to be not so strongly sensitive to the tensile properties but sensitive to displacement on the circumferential direction of hole edge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.50-52
• /
• 2008

We have limited the transfer power to capital area below a certain level which is called "The Capital Area Transfer Power Limit", and calculated on every Thursday for the application next week. This level is very important in our network operation, because if this level is not set properly, our power network can be fallen under great danger in case of a fault among the transfer power line. But the calculation procedure for the limit level is so complicated and iterative that it mace us spend much time and do much work. So, when a sudden trip of the related facility to the limit level we can't recalculate the limit level fast enough. And this can drop our network reliability below our standards, therefore our network can be dangerous. To avoid this kind of problems, we have figured out a method to calculate simply the limit level. That method uses the index related to the level. We think this method can make short of the calculation procedures for the level. This paper deals with the simplified method for the calculation of the level limit.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.287-296
• /
• 2017

Although emission regulations have been gradually strengthened in the past decade, the road transport section remains the most important source of NOx emission in air pollution. One reason is that there has been an increase in the proportion of diesel vehicles and in the volume of traffic. In addition, the certification procedure for standard emission limit does not sufficiently reflect real traffic condition and various driving patterns. Therefore, the European Commission(EC) has recently come up with the RDE-LDV(Real driving emissions-light duty vehicle) regulations, and the Ministry of Environment in Korea has been conducting research on evaluating RDE-LDV with PEMS(Portable Emission Measurement Systems). According to the trip requirements of the 2nd RDE package announced by the EC, the objectives of the present study include the development of Korean RDE routes to reflect domestic traffic and road conditions. Based on the results, both RDE routes are in correct compliance with RDE-LDV regulations, including trip requirements and trip dynamics. KOR-NIER Route 1, in particular, has a higher driving load in rural driving with regard to excessive gradient of elevation compared to KOR-NIER Route 2, including relatively plane rural driving.

• Nuclear Engineering and Technology
• /
• 제16권2호
• /
• pp.106-115
• /
• 1984

원자로 안전한계 설정의 근본목적은 핵연료 및 원자료 계통의 건전성을 보장할 수 있도록 원자로 운전조건을 제한하자는 데 있다. 원자로 보호계통은 원자로 운전변수들이 트립설정치에 도달하게 되면 원자로를 긴급정지시켜 운전조건이 안전한계를 초과하지 못하도록 한다. 따라서 이들 트립설정치의 생산을 위해서는 계산과 측정오차를 충분히 고려해 주어야 한다. 본 기술보고서에서는 웨스팅하우스 원자로 보호계통 트립설정치의 생산에 따른 기본원리와 노심 안전한계의 개발방법 및 트립설정치의 생산절차를 검토하였다. 웨스팅하우스 보호계통 트립설정치의 생산원리는 노심의 안전한계를 계산하고 측정 및 계산에 따른 불확실성을 충분히 고려하여 보수적인 트립설정치를 생산함으로써 핵연료의 용융과 DNB가 발생하지 않도록 하자는 데 있다.

• Nuclear Engineering and Technology
• /
• 제30권3호
• /
• pp.222-234
• /
• 1998

The Westinghouse OT$\Delta$T DNB protection logic heavily restricts the operation region by applying the same logic for a full range of operating pressure in order to maintain its simplicity. In this work, a fuzzy neural network method is used to estimate the DNB protection limit using the measured average temperature and pressure of a reactor core. Fuzzy system parameters are optimized by a hybrid learning method. This algorithm uses a gradient descent algorithm to optimize the antecedent parameters and a least-squares algorithm to solve the consequent parameters. The proposed method is applied to Yonggwang 3&4 nuclear power plants and the proposed method has 5.99 percent larger thermal margin than the conventional OT$\Delta$T trip logic. This simple algorithm provides a good information for the nuclear power plant operation and diagnosis by estimating the DNB protection limit each time step.

• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.44-53
• /
• 2016

오늘날 우리 주변에는 규모를 가늠할 수 없을 정도로 많은 정보와 데이터가 생산되는 '빅데이터(Big Data)'의 시대가 도래 하였으며, 그 중요성이 날로 커지고 있다. 교통분야에서는 전통적인 통행기반교통모형(Trip-Based Model)인 4단계 교통수요추정법의 한계가 드러나고 있으며, 활동기반교통모형(Activity-Based Model)을 이용한 수요 추정 방법이 교통계획에 새로운 패러다임으로 떠오르고 있다. 교통은 사람이나 물류의 공간상의 시간적 이동을 의미한다고 봤을 때 공간데이터와 밀접한 관련이 있다. 따라서 공간정보를 포함하고 있는 SNS를 대상으로 시계열적 공간정보를 추출하고, 이를 현재의 통행기반교통모형(Trip-Based Model) O/D와 비교 분석하여 그 특성을 파악하고 유용성을 검증하였다. 또한, 활동기반교통모형(Activity-Based Model)의 분석자료를 구축하여 교통시뮬레이터 프로그램을 이용해 시뮬레이션을 수행하고 그 결과를 고찰하였다. 연구결과 다수의 활동기반 교통모형 분석자료를 구축할 수 있었으며, 이번 연구를 통해 교통분야 빅데이터 활용의 기술적 한계를 극복할 수 있는 가능성을 확인하였고, 향후 발전방향을 모색하는 기회가 되었다.

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.67-74
• /
• 2009

This paper describes the speed control functions of the typical steam turbine speed controllers and the test results of generator load rejection simulations. The goal of the test is to verify the speed controller's ability to limit the steam turbine's peak speed within a predetermined level in the event of generator load loss. During normal operations, the balance between the driving force of the steam turbine and the braking force of the generator load is maintained and the speed of the turbine-generator is constant. Upon the generator's load loss, in other word, the load rejection, the turbine speed would rapidly increase up to the peak speed at a fast acceleration rate. It is required that the speed controller has the ability to limit the peak speed below the overspeed trip point, which is typically 110[%] of rated speed. If an actual load rejection occurs, a substantial amount of stresses will be applied to the turbine as well as other equipments, In order to avoid this unwanted situation, not an actual test but the other method is necessary. We are currently developing the turbine control system for another nuclear power plant and have plan to do the simulation suggested in this paper.

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.34-38
• /
• 2006

In the wireless network, TCP performs poorly because it was originally designed for wired networks and does not take into consideration wireless characteristics such as mobility, high-loss probability, and hidden-terminal problems. In particular, in the wireless multi-hop networks, a large congestion window increases the probability of contention and packet losses, and TCP performance is degraded severely as a result. So, it is necessary to limit the TCP congestion window size in order keep the probability of contention loss in the system to a minimum. In this paper, we propose a new scheme for determining the maximum congestion window size based on the measured bandwidth and Round-Trip-Time (RTT). Using ns-2 simulation, we show that the proposed scheme reduces the probability of packet contention and improves TCP performance.