• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.236-242
• /
• 1992

The characteristics of dynamic terms in the core overtemperature Delta-T trip function are investigated for various time constants and the effects on the trip setpoint are studied for the uncontrolled RCCA bank withdrawal at power event by using the NLOOP and the PUMA code. Based on this study, a procedure determining the optimal dynamic term is suggested and accordingly the optimum time constants are determined for the KORI 3&4 transition core. It reveals that the vessel average temperature-lead-lag term is the most sensitive in DNB trip setpoint and the optimized time constants are 21 seconds for lead and 4 seconds for lag.

• Journal of Korean Society of Transportation
• /
• v.4 no.1
• /
• pp.28-40
• /
• 1986

Accurate subway demand estimation which is essential for better route selection can be achieved by the exact definition of the influence sphere of subway station. The influence was derived implicitly from the analysis of access time to the station for the cases of Seoul. Access time distribution was investigated by trip purposes, by age, by income, by sex, by travel distance, by kinds of thickets, by the location of station for the analysis of relationship between access time and socio-economic characteristics or urban structure. The difference of average access time between direct access trip and transfer trip which is found 8.6 minutes and 6.1 minutes respectively also investigated. The small difference implies poor transfer system of Seoul subway. 83.1% of subway users are coming from the distance of 10minutes' walk and average access time is 7.8minutes as a whole.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.101-110
• /
• 2021

This paper presents the results of an initiating event analysis as part of a Level 1 probabilistic safety assessment (PSA) for at-power internal events for the Korea Research Reactor (KRR). The PSA methodology is widely used to quantitatively assess the safety of research reactors (RRs) in the domestic nuclear industry. Initiating event frequencies are required to conduct a PSA, and they considerably affect the PSA results. Because there is no domestic database for domestic trip events, the safety of RRs is usually assessed using foreign databases. In this paper, operating experience data from the KRR for trip events were collected and analyzed in order to determine the frequency of specific initiating events. These frequencies were calculated using two approaches according to the event characteristics and data availability: (1) based on KRR operating experience or (2) using generic data.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.115-119
• /
• 2013

The resistance spot welding of high strength steel degrades the weldability because of its high strength with rich chemical composition and coating layer to protect from corrosion. And the weld Expulsion is prone to occur and severely affect the nugget guality when the initial gap between automatic borrowing galvanied steel sheets(SGARC35) and Zn-coateel trip steels(GA580TRIP and GA980 TRIP) exist in resistance spot welding(RSW). RSW is one of the most popular welding processes used to join sheet metals. but weld guality sometimes do creases due to welding condition. in this paper to verity tue weldability using spot welding with the hemispherically concaved electrode, tensile shear strength and cross-tensile strength were measured by a universal test machine. in addition, the nugget size on cross-sectional area of the weld was observed by optical and electron microscopy. As a result, the nugget size of this specimen is increased with increasing welding current and Max load of tensile-shear strength is increased with welding current is increasing.

• Journal of Welding and Joining
• /
• v.33 no.2
• /
• pp.69-77
• /
• 2015

High strength steels have been continually being developed to improve in fuel economy in automotive and ensure safety of passengers. New bonding and welding methods have been required for improving weldability on high strength steels. In this study, resistance spot welding and Weld-bond with nugget diameters of 4.0mm, 5.0mm, 6.0mm and 7.0mm were produced and tested, respectively. In order to confirm the effect of nugget diameters on tensile shear characteristic of the Weld-bond, tensile shear characteristics of Weld-bond were compared with those of resistance spot welding and adhesive bonding. Peak load of Weld-bond were increased as the nugget diameter increases. After appearing maximum peak load continuous fracture followed with second peak owing to load being carried by resistance spot weldment. Fracture modes of the adhesive layer in Weld-bond fractures were represented by mixed fracture mode, which are cohesive failure on adhesive part and button failure at resistance spot welds. The results showed that the tensile shear properties can be improved by applying Weld-bond on TRIP steel, and more apparent with nugget diameter higher than 5${\surd}$t.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.19-32
• /
• 1999

In this study, the trip characteristics of workers in the city are systematically analyzed. The trip behaviors and socioeconomic characteristics of workers are analyzed using Person Trip Survey Data of 1988 and 1992 in Taegu Metropolitan area. With the results of behavioral analyses, the daily travel pattern of workers is shown as one tour contained two trips and it is relatively simple and stable. Also the rate using the same mode in a day is Presented as high ratio. So, it can be explained that the choice of worker\`s first trip is fixed his/her travel mode for his/her daily travel mode. Based on these analyses, the mode choice model for workers is developed by applying the Multi-nominal Logit Model with the choice set of bus, taxi, and car. The explanatory variables of this model include sex, age, auto, travel time, and cost. Empirical tests of the model show encouraging results. After that, the temporal transferability of the model is examined by the Pairwise t-test and five indexes far the model of 1988 and 1992. The results of examination are satisfied with each significance level of the explanatory variables and five indexes. Therefore. it can be concluded that the temporal transferability of this model developed in this study is resonable.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.107-118
• /
• 2012

The purpose of the study is to analyze the travel characteristics of freight trucks in metropolitan areas, focusing on activity generation, destination choice, and trip chaining behaviors. The results showed that the number of service companies at departure areas has a primary influence on the activity generation pattern and destination choice behavior of trucks in metropolitan areas. The number of trips within a trip chain is largest, in case where the prevailing industry in destination areas is wholesale or retail and the shipment item is food or beverage. These results imply that for the reasonable estimation of truck travel demand both the trip chaining behaviors and the industrial compositions in departure and destination areas should be separately considered for each type of commodity.

• Journal of Welding and Joining
• /
• v.24 no.1
• /
• pp.56-63
• /
• 2006

The characteristics of $CO_2$ or Nd:YAG laser welded 600MPa ade TRIP steel was investigated. He or Ar gas was used as a shield gas in case of $CO_2$ laser welding, but the shield gas was not used in case of Nd:YAG laser welding. Bead on plate welding was performed with various welding conditions. Defects in the joints of both welding type occurred at 1.8m/min but were not observed over the welding speed of 2.1m/min in case of Nd:YAG laser welding. However, porosity occurred in $CO_2$ laser welding and the tendency of decreasing with the increase of welding speed. The hardness was the highest at heat affected zone near fusion zone as well as at the fusion zone and decreased on approaching the base metal. In a perpendicular tensile test to the weld line, all specimens that have been welded at optimum conditions were fractured at the base metal, and the tensile properties showed the rather higher than those of raw material. In a parallel tensile test, the strength of the joints was higher than that of the base metal. Elongation was found to be lower than that of the raw material. Forming height by Erichsen test and elongation were deeply related with the ratio of base metal/weld metal and the maximum hardness of the weld metal. Also porosity induced to decrease the strength and the elongation. The maximum formability was recorded at approximately 80% as compared with that of the raw material with the optimum condition.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.69-73
• /
• 2013

The purpose of this paper is to analyze the carbonization pattern and operation characteristics of an MCCB. The MCCB is consisted of the actuator lever, actuator mechanism, bimetallic strip, contacts, up and down operator, arc divider or extinguisher, metal operation pin, terminal part, etc. When the actuator lever of the MCCB is at the top or the internal metal operation pin is in contact with the front part, the MCCB is turned on or off. It means trip state if the actuator lever or the internal metal operation pin moves to back side. In the UL 94 vertical combustion test, white smoke occurred from the MCCB when an average of 17~24 seconds elapsed after the MCCB was ignited and black smoke occurred when an average of 45~50 seconds elapsed. It took 5~6 minutes for the MCCB surface to be half burnt and took an average of 8~9 minutes for the MCCB surface to be entirely burnt. In the UL 94 test, the MCCB trip device operated when an average 7~8 minutes elapsed. If the MCCB trip has occurred, it may have been caused by an electrical problem such as a short-circuit, overcurrent, etc., as well as fire heat. From the entire part combustion test according to KS C 3004, it was found that the metal operation pin could be moved to the MCCB trip position without any electrical problems.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.61-70
• /
• 2012

This research explores different non-work trip characteristics between the elderly group (65+) and the working age group (20-64) using heteroscadastic ordered logit model. The analysis is based on travel survey data of Seoul Metropolitan area in 2006. The results show that age induces heteroscadasticity and the model provides a better fit than ordered logit model. The factors increasing the number of non-work trip of the elderly were driver's license and household income. Conversely, the number of non-work trips decreased in those groups that were male, with a job, in aging, and with the number of preschool children. The factors having opposite effects (increased the number of non-work trips in the working age groups and decreased in the elderly group) between the elderly group and working age group were age and job.