• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.291-298
• /
• 2008

For many years beak trimming has been a controversial subject, particularly since the 1980's when the practice came under close scrutiny by animal welfare groups. In Australia it is considered an essential practice, averting losses of AUD$17.5m annually by reducing mortality from cannibalism. While mortality in flocks from cannibalism can be reduced from 25% of the flock to virtually nil, the beak trimming procedure is considered traumatic for the bird. This study examined if chronic pain in the beak was evident in birds 10, 20 and 60 weeks after being trimmed at hatch and in another group of birds, 8 and 52 weeks after being re-trimmed at 14 weeks. Chronic pain was assessed by measuring pecking behaviour and beak sensitivity responses. Pecking behaviour studies completed after beak trimming and re-trimming showed no evidence to indicate that birds were suffering severe chronic pain in the beak. Beak trimmed pullets pecked more at the cage and had more toe pecks, yet overall pecks made at the feed and the environment were no different than untrimmed controls. While the beak sensitivity studies provided evidence that the beak of birds trimmed at hatch and also re-trimmed at 14 weeks may be more sensitive there was no evidence that re-trimming resulted in a more sensitive beak than birds trimmed at hatch only. These studies have shown that birds which are beak trimmed and re-trimmed return to apparently normal feeding and pecking behaviour in the long term. However, there was limited evidence that beaks of trimmed birds have an altered threshold to potentially painful stimuli.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.61-67
• /
• 2022

Purpose: This study aimed to evaluate the accuracy of bite registration using intraoral scanner based on data trimming strategy for fremitus teeth. Materials and Methods: A reference model was designed by Medit Model Builder software (MEDIT Corp., Seoul). Tooth number 24 and 25 were separated as dies and tooth number 26 was prepared for full-coverage crown. Those were printed using a 3D printer (NextDent 5100). The scanning procedure was performed by a single trained operator with one intraoral scanner (i700; MEDIT Corp.). The scanning groups were divided as follows: group 1 (G1), no fremitus; group 2 (G2), 0.5 mm buccal fremitus in the maxillary left first and second premolar; and group 3 (G3), 1.5 mm buccal fremitus in the maxillary left first and second premolar. Each group was scanned 10 times and were analyzed using the reference model data. Surface-based occlusal clearance was analyzed at the prepared tooth to evaluate accuracy. Result: Mean values of control group (G1) were 1.587±0.021 mm. G2 showed similar values to those from the control group (1.580±0.024 mm before trimming strategy and 1.588±0.052 mm after trimming strategy). G3 showed significantly greater values (1.627±0.025 mm before trimming strategy and 1.590±0.024 mm after trimming strategy) and the differences were found between trimming strategy (P=0.004). Conclusion: Bite trimming strategy for fremitus teeth is a reliable technique to reduce inaccuracies caused by the mobility at maximum intercuspation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.101-108
• /
• 2004

It is very important to diagnose state of knife and strip cutting face in real time in the side trimming process due to improvement of quality of trimming face. In this study, diagnosis system for knife and strip cutting face was developed. CCD camera was installed at the both side of strip in the entry of burr masher roll. This system offer to operator the diagnosis result that was analyzed image obtained from CCD camera. As a result, bad quality of trimming face is decreased below 1/10 and knife breakage is detected $100\%$.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.29-34
• /
• 2006

In this paper, the mechanical characteristics of ultrasonic cold forged technology (UCFT) used for the trimming knife and the effects of ultrasonic vibration energy (UVE) into the trimming process on the state of the strip cutting face were studied. And a diagnosis system to quality control for trimming knife and strip cutting face was developed and installed in plant. By the plant application of UCFT, service life of knife was more increased over 100% than that of conventional knife. And using the developed diagnosis system, the knife breakage and saw ear have been perfectly detected and quality control of trimming face is obtained effectively.

• 소성∙가공
• /
• 제12권6호
• /
• pp.536-541
• /
• 2003

In this paper, the rigid-viscoplastic finite element method is employed together with an iteratively force-balancing method to analyze a piercing and trimming process with a spring-attached die in hot former forging. An actual piercing and trimming process with a spring-attached die is investigated in detail and a generalized analysis model is proposed. A multi-stage hot former forging process is simulated under various spring constants. The analyzed results are discussed in order to investigate the effects of spring constants on the metal flow lines and the formed shapes. Then an optimal piercing and trimming process in hot former forging is devised.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.36-40
• /
• 2017

In this paper, a new method of laser trimming of thick film heater is studied. Various laser waves (IR, Green, UV) are used to ablation the heater and the process parameters are also presented. For given initial printed resisters, the cutting length should be prepared to obtain the target resister value in advance. Therefore, the cutting model is very important. The well-known model was tested and proven that it is valid only within a certain range of cutting length. A new model is proposed for a wide range of resister laser trimming. The cutting lengths and resister variation was obtained and formulated. To verify the presented method, the cutting lengths of each resister are calculated for various target resister value and laser trimming using UV is conducted.

• 패션비즈니스
• /
• 제13권1호
• /
• pp.125-140
• /
• 2009

The purpose of this study was to examine the Detail&Trimming from 16C to 18C, so called 'the age of decoration' and how they had been applied to contemporary fashion through various collections. Then this study investigated decorative trends based on the frequency analysis. For the methods of study, using literature review, theoretical research was conducted to investigate the kinds of modern clothing accessories and analyze how they were applied to contemporary fashion and its trends. The period of empirical research was from 2000 to 2006 S/S with its focus on "Mode et Mode", a representative fashion magazine. As a result, for detail, decorative composition, surface decoration, and trimming, detail-applied decorative designs showed the highest percent. To get a closer look, the highest applied decorative technique was found rough collar in the detail; fringing in the decorative composition; slash in the surface decoration; and jewelry in the trimming.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.119-125
• /
• 1999

At Wire Rod Mill Plant, wire is made of the billet produced at continuous casting machine, or rolled bloom produced at billeting mill, and the product can be classified of wire of 5.5${\Phi}$ and bar in coil of 14∼42${\Phi}$ in diameter(bar in coil will be referred to as coil as below). At present, wire is produced at POSCO No.1, 2, 3 WRM, coil at garret line of No. 2 WRM. Head and tail of coil are properly cut and treated to scrap to fulfill the customer's satisfaction. This above cutting is done off line, and small size coil can be cut manually with clipper, large size coil with hydraulic cutter. Nowadays, it is being investigated to cut automatically in line with trimming shear after passing mill stand. At the moment, Because the coil produced at the garret line of No.2 WRM is hot 400∼600$^{\circ}C$ and trimming is done manually with cutter, there are always interference from manual operation or safety problem of bad working condition. Not only because of the diversity of the coil size 14∼42${\Phi}$ in diameter, but because of the rolling speed 2.5∼22m/sec, it is required to be equipped with several trimming shear. But this can be accomplished with only one shear installed proper place at this paper.

• 건축역사연구
• /
• 제8권1호
• /
• pp.9-28
• /
• 1999

Broadly speaking, this paper is concentrated on the trimming of the wood demanded for the palace, constructed in the 2nd half of the Choseon Dynasty. To be concrete, this is the study on the craftman and craftmanship corncerned with the trimming of the wood, its system, and terms of payment of his wages, Construction reports, financial reports, job slips, written estimates, bills for payment, and other documents in those days are examined for the study. Following conclusions have been reached through the study. 1) The operation system of whole construction office and its suboffice was very specialized and systematized from the early 19th century. 2) The craftman engaged in trimming of the wood was subdivided by work function. 3) The craftman for its first trimming, i.e. 'keojang' or 'seonjang' had been treated as a speacial labor recruited to the mid-l8th century, after that, was enrolled into the craftman. 4) A unit cost of its first trimming was firstly appropriated into the reconstruction of the Kyongwoon Palace in the early 20th century, and it was very subdivided for a personnel management. 5) Contract works were widely applied to all workers engaged in the reconstruction for an efficiency of the accomplishments.

• 대한치과기공학회지
• /
• 제2권1호
• /
• pp.67-68
• /
• 1980