• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.768-773
• /
• 2005

A new approach for human foot modelling and last design based on the cross sectional method is presented in this paper. The proposed last design method utilizes the dynamic trimmed parametric patches for the foot 3D data and last 3D data. The cross section a surface of 3D foot for the 3D last, design modeling of free form geometric last shapes. The proposed last design scheme wraps the 3D last data surrounding the measured 3D foot data with the effect of deforming the last design rule The last design rule of the FFD is constructed on the FFD lattice based on foot-last shape analysis. In addition, the control points of FFD lattice are constructed with cross sectional data interpolation methods from the a finite set of 3D foot data. The deformed 3D last result obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the last designed with the proposed scheme has good performance.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.792-800
• /
• 1997

The purpose of this study was to evaluate the adaptation of self-cured glass ionomer cement and resin-modified glass ionomer cement and polyacid-modified resin composite, which are light-cured giass ionomer cements, to dentin surface. Twelve extracted human maxillary and mandibular molar teeth were used in this study. The entire occlusal dentin surfaces of teeth were exposed with Diamond Wheel Saw and smoothed with sand papers (300, 600, 1200grits). They were randomly assigned into 3 groups according to glass ionomer cements used; Control group- Fuji II, Expeimental group 1 - Fuji II LC, Expeimental group 2 - Dyract. According to the manufacturer's directions, three glass ionomer cements were bonded to exposed dentin surfaces of the tooth crown and cured. Crowns and glass ionomers were trimmed after 24hrs and sectioned horizontally and vertically with diamond saw. The interface of glass ionomer cements and dentin was examined under SEM. The results were as follows : 1. Good adatation between glass ionomer cement and dentin on the horizontal section was showed in control and experimental group 1, but the gap of $20{\mu}m$, which was observed distinct separation between glass ionomer cement and dentin, was showed in experimental group 2. 2. Good adatation between glass ionomer cements and dentin on the vertical section was showed in control and experimental group 1, but the gap of 80-$100{\mu}m$ was showed in experimental group 2. 3. Cohesive fracture within glass ionomer cements in control and experimental group 1 was showed, but no cohesive fracture was showed in experimental group 2.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.698-704
• /
• 2006

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.294-306
• /
• 2019

On the basis of the Computational Fluid Dynamics technique (CFD) combined with the overlap grid method, this paper establishes a numerical simulation method to study the problem of ice-propeller interaction in viscous flow and carries out a simulation forecast of the hydrodynamic performance of an ice-class propeller and flow characteristics when in the proximity of milling-shape ice (i.e., an ice block with a groove cut by a high-speed revolving propeller). We use a trimmed mesh in the entire calculation domain and use the overlap grid method to transfer information between the domains of propeller rotation calculation and ice-surface computing. The grid is refined in the narrow gap between the ice and propeller to ensure the accuracy of the flow field. Comparison with the results of the experiment reveals that the error of the hydrodynamic performance is within 5%. This confirms the feasibility of the calculation method. In this paper, we calculate the exciting force of the propeller, analyze the time domain of the exciting force, and obtain the curve of the frequency domain using a Fourier transform of the time-domain curve of the exciting force. The existence of milling-shape ice before the propeller can greatly disturb the wake flow field. Unlike in open water, the propeller bearing capacity shows a downward trend in three stages, and fluctuating pressure is more disordered near the ice.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권7호
• /
• pp.574-579
• /
• 2016

기존의 연구에서 저항 성능을 정도 높게 추정하던 격자 시스템은 모형선의 길이 6-8m, 동적 트림 ${\pm}1^{\circ}$ 이하인 일반 대형 상선에 최적화되어 있다. 이러한 격자 시스템을 소형 어선과 같이 프루드 수 0.3~0.8, 동적 트림이 ${\pm}3^{\circ}$ 이상인 대상선에 적용할 경우 수치적 불안정성을 야기한다. 본 연구에서는 이러한 문제를 해결하기 위해 부심으로부터 입구 경계 조건의 길이를 줄이고, 자유수면의 각도에 따라 밀집된 격자 형태를 갖는 격자 시스템을 구성하였다. 상기 격자 시스템을 이용하여 설계 흘수와 밸러스트 흘수에서 다양한 선속에 대해 어선에 작용하는 저항을 수치 해석으로 계산하였으며, ITTC-1978 2차원 해석법을 이용하여 소형 어선의 유효마력을 추정하였다. 준추진효율 계수는 기존의 모형시험 자료를 활용하였으며, 설계 흘수에서 제동마력 추정을 통해 속도 성능을 평가하였다.

• 구강회복응용과학지
• /
• 제24권1호
• /
• pp.105-112
• /
• 2008

본 연구의 목적은 3종의 자가부식 프라이머(Clearfil SE Bond, AdheSE, Tyrian) 사용시 상아질계면의 접촉각 및 미세인장결합강도를 측정하는 것이다. 연마된 상아질 표면에 3종의 자가부식 프라이머를 각각 적용한 후 접촉각을 측정하였으며 (n=30), One-way ANOVA를 사용하여 통계처리하였다. 미세인장결합강도측정을 위해서는 상아질 표면에 3종의 자가부식 프라이머 및 상아질 접착제를 각각 적용한 후 광중합 복합레진 (Z 250)을 5mm 두께로 쌓아 올렸다. 그 후 각 시편을 결합계면에 수직으로 분할한 뒤 (n=45) universal testing machine을 사용하여 미세인장강도를 측정하였고, Kruskal-Wallis test를 통하여 통계처리하였다. 접촉각 측정결과, AdheSE, Clearfil SE Bond, Tyrian 순으로 높은 접촉각을 보였으며 각 군간 통계적 유의성 있는 차이를 보였다 (p<0.05). 미세인장결합강도 측정결과 Clearfil SE Bond군과 AdheSE군은 유의성 있는 차이를 보이지 않았으며, Tyrian군은 Clearfil SE Bond 군이나 AdheSE 군에 비해 유의성 있게 작은 미세인장결합강도를 보였다.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.1019-1028
• /
• 2018

The crust that inevitably forms on dry-aged beef is usually trimmed and discarded before sale. The aim of this study was to explore methods for utilizing this crust in processed meat products. Four sirloins were dry-aged for 28 d at $4^{\circ}C$ (75% relative humidity). The crust obtained from the surface of the sirloins after completion of dry aging was lyophilized. Patties were prepared without added crust (control) or with 5% w/w crust, aerobically packaged, and stored at $4^{\circ}C$ for 7 d. Electronic nose analysis indicated that the volatile profile differed significantly between the patties with and without crust. Compared to the control patties, patties containing crust had higher flavor, tenderness, juiciness, and acceptability scores in a sensory panel evaluation (all p<0.05). In addition, patties with crust were less hard, gummy, and chewy than the control patties after 3 and 7 d of storage (all p<0.05). The number of total aerobic bacteria was higher in raw patties with crust than in the control patties during the storage (p<0.05). However, no pathogens were detected. 2-Thiobarbituric acid reactive substance values of patties containing crust were significantly lower than those of control patties after 2 and 6 d of storage (both p<0.05). Thus, crust from dry-aged beef can enhance the flavor by providing beefy and palatable flavor without a long period of dry aging.

• Archives of Plastic Surgery
• /
• 제39권2호
• /
• pp.162-165
• /
• 2012

The synchondrosis between the sixth and seventh costal cartilage is usually used for the base frame in autogenous ear reconstruction. If the synchondrosis is loose, a variety of modifications can be devised. This report introduces new methods for these problems. In cases of incomplete synchondrosis, only the surface of the base block margin was smoothly tapered without carving for the removal of the conchal deepening. The secure fixation of the two segments (helix and antihelix) to the base block using fine wire sutures gave stability to the unstable basal frame. After confirming that all the segments were assembled in one stable piece, the remaining conchal deepening of the basal framework was removed, and the outer lower portion of the basal cartilage was trimmed along its whole length. A total of 10 consecutive patients with microtia, ranging from 8 to 13 years old, were treated from 2008 to 2009. The follow-up period was 6 months to 2 years. Despite incomplete synchondrosis, the stable frameworks were constructed using the authors' method and aesthetically acceptable results were achieved. The proposed method can provide an easy way to make a stable cartilage framework regardless of the variable conditions of synchondrosis.

• Archives of Plastic Surgery
• /
• 제32권2호
• /
• pp.219-226
• /
• 2005

Muller's muscle-levator aponeurosis advancement procedure was performed to correct mild to moderate congenital blepharoptosis with moderate to good levator function and to correct severe aquired blepharoptosis with poor levator function. Through the blepharoplasty incision, the upper half of the tarsal plate was exposed and the orbital septum was opened to show the levator aponeurosis. The Muller's muscle was dissected from the superior margin of the tarsal plate and from the posteriorly located conjunctiva with sharp scissors. The Muller's muscle and levator aponeurosis were advanced on the anterior surface of the tarsal plate as a composite flap and fixed approximately 3 to 4 mm inferior to the upper edge of the tarsal plate with three horizontal 6-0 nylon mattress sutures. The amount of advancement of the composite flap was controlled by the location of the upper eyelid margin 2 mm below the upper limbus in primary gaze after the first suture in the middle portion of the flap. The excess flap was trimmed off with scissors, but trimming was usually not necessary in cases of mild to moderate ptosis. Nine cases underwent this Muller's muscle-levator aponeurosis advancement procedure from September 2003 to September 2004. Five cases were congenital blepharoptosis with 2-4 mm ptosis and more than 5 mm of levator function, but three of the four acquired ptosis cases had more than 4 mm ptosis with poor levator function. The age of the patients ranged from 7 to 81 years. In operative results, all patients except one traumatic case were within 1 mm of the desired eyelid height in primary gaze. This procedure can provide not only tightening of the Muller's muscle but also advancement and firm fixation of the levator aponeurosis to the tarsal plate, yielding predictable results.

• 보존과학회지
• /
• 제17권
• /
• pp.73-82
• /
• 2005

분황사석탑은 가장 오래된 신라시대의 모전석탑이다. 탑신부는 벽돌처럼 제작된 검은 안산암으로 이루어져 있으며, 화강암으로 조성된 감실이 1층탑신석에 있다. 1915년 대대적인 수리가 행해졌으나, 현재 석탑의 구성암석에서는 여러 손상의 형태들이 나타나고 있다. 특히 구성화강암 표면에서는 박리 사질상입자분해 등이 심하게 나타나고 있다. 본 연구에서는 다양한 분석을 통하여 구성화강암의 정확한 훼손현황을 살펴보았고, 탑신부에 나타나고 있는 백화현상과의 관계를 통해 그 손상원인을 찾아보았다. 연구결과, 구성 화강암은 석탑 표면에 발생된 백화현상의 원인 물질로 인해 훼손이 가중되고 있는 것으로 알려졌다. 백화현상의 원인 물질은 질산나트륨. 황산칼슘, 황산나트륨 등의 수용성 염류로, 백색 줄눈몰타르에서 기인한 것이다. 석탑의 외부는 이러한 백색 줄눈몰타르가 수분과 반응하여 재결정화되고 있지만, 많은 부분이 빗물에 의해 씻겨 내려가다가 밖으로 배수되는 것으로 생각된다. 이 과정에서 빗물에 용해된 염성분들이 감실을 구성하고 있는 화강암을 거쳐가게 되고, 다공성의 화강암은 모세관현상에 의해 이 염들을 수분과 함께 암석의 내부로 흡수한다. 그러므로 구성화강암이 갖고 있는 염문제를 줄일 수 있는 방법은 백색 줄눈몰타르를 용해성이 적은 다른 물질로 대체하는 것이다. 또한 석탑내부로 흘러들어온 수분이 백색 줄눈몰타르를 용해시킬 수 있기 때문에, 상부에서 석탑내부로 수분이 흘러내리지 않도록 조치를 취하는 것이 필요하다.