• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.304-310
• /
• 2004

Resistance performance of small size fishing vessel is experimentally investigated to find out the effect of fore-body shape and trim for the better hull from development. The tests are performed for five different cases in the high speed circulating water channel(CWC). Wave patterns are observed to investigate the relation between the resistance performance and the wave characteristics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.916-924
• /
• 2008

In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.445-453
• /
• 2002

Past and current customer behavior is the best predicator of future customer behavior. This paper introduces a procedure on personalized defection detection and prevention for an online game site. The basic idea for our defection detection and prevention is adopted from the observation that potential defectors have a tendency to take a couple of months or weeks to gradually change their behavior (i.e. trim-out their usage volume) before their eventual withdrawal. For this purpose, we suggest a SOM (Self-Organizing Map) based procedure to determine the possible states of customer behavior from past behavior data. Based on this representation of the state of behavior, potential defectors are detected by comparing their monitored trajectories of behavior states with frequent and confident trajectories of past defectors. The key feature of this study includes a defection prevention procedure which recommends the desirable behavior state for the ext period so as to lower the likelihood of defection. The defection prevention procedure can be used to design a marketing campaign on an individual basis because it provides desirable behavior patterns for the next period. The experiments demonstrate that our approach is effective for defection prevention and efficient for defection detection because it predicts potential defectors without deterioration of prediction accuracy compared to that of the MLP (Multi-Layer Perceptron) neural network.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5161-5166
• /
• 2014

Our aim was to access the association between recreational physical activity (RPA) and risk of ovarian cancer (OC). The studies were retrieved from the PubMed and Embase databases up to February 20th, 2014. Risk ratios (OR) and 95% confidence intervals (CI) were used to estimate effect sizes. Random-effects or fixed-effects models were used to pool the data. The trim and fill method was applied for sensitivity analysis. Begg's rank correlation test and Egger's regression asymmetry test were employed to assess the publication bias. A total of 6 studies (435398 participants including 2983 OC patients) were included in this meta-analysis. The overall estimate indicated that there was weakly inverse association between RPA and OC risk (RR=0.90, 95%CI: 0.72-1.12, p=0.335). Meanwhile, for prospective cohort studies, a result consistent with the overall estimate was obtained (RR=1.12, 95% CI: 0.88-1.42, p=0.356). However, for case control studies, the pooled estimate of RR was 0.76 (95%CI: 0.64-0.90, p=0.002), indicating a clear significant association between RPA and OC risk. In addition, the sensitivity analysis indicated a significant link between RPA and risk of OC after removing Lahmann's study (RR=0.80, 95% CI: 0.68-0.93, p=0.004). No significant publication bias was found (Begg's test: p=1.00; Egger's test: p=0.817). In conclusion, our meta-analysis indicated a weakly inverse relationship between RPA and the occurrence of OC.

• Korean Journal of Adult Nursing
• /
• v.28 no.4
• /
• pp.399-414
• /
• 2016

Purpose: The purpose of this study was to review and identify factors relevant to workplace bullying in nursing. Methods: Twenty-three studies that met the criteria were selected from a sample of twenty-six studies. These articles were retrieved from a central literature databases (N=13,241). The total correlational effect size (ESr) for each related factor was calculated from Fisher's Zr. A funnel plot inspection (similar to scatter plot) with a trim-and-fill method was used to assess the publication bias of the meta-analyzed studies. Results: From the systematic review, fifty-one factors were identified as having an influencing effect. Fourteen factors (five individual and nine organizational factors) were eligible for meta-analysis. The individual factors included, self-esteem (ESr=-.31), psychological capital (ESr=-.26), and marital status (ESr=-.06) which were significantly correlated with workplace bullying. Organizational factors included, organizational tolerance (ESr=.48), supervisor incivility (ESr=.47), job stress (ESr=.46), group morale (ESr=-.36), group support (ESr=-.35), supervisor leadership (ESr=-.35), group identity (ESr=-.33), and structural empowerment (ESr=-.27). These factors were significantly correlated with workplace bullying. There were no publication biases except for both individual and organizational factors. Conclusion: Organizational factors have more of an greater impact than individual factors on workplace bullying. The results of this study support the need for intervention at the organizational level.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.115-122
• /
• 2014

Injection pressure is one of factors that influence part quality. In this paper, injection pressure was minimized by optimizing valve gate locations. In order to perform design optimization, MAPS-3DTM (Mold Analysis and Plastic Solution-3D) was used for injection mold analysis and PIAnOTM (Process Integration, Automation and Optimization) was used as process integration and design optimization. Also we adapted meta models based on design of experiments for efficiency. By using introduced methodology, we were able to obtain a result so that maximum injection pressure reduced by 28% compared to the initial design. And the validity of the proposed method could also be demonstrated.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.252-256
• /
• 2002

We studied YBCO films for current limiting of the resistive type which utilizes a transition from superconducting to normal state caused by exceeding critical current. The films were deposited on sapphire substrates and covered by gold top layer. The current limiting element consists of 2 mm wide YBCO stripes connected in series. A serious problem in using YBCO films for current limiting is inhomogeneities caused by imperfect manufacturing. Therefore simultaneous quench is a difficult problem when elements for current limiting are connected in series. So some researchers have recently proposed using magnetic field and heating for simultaneous quench. We have measured extended exec trim field-current density(E-J) characteristics for current limiting elements of YBCO films in applied magnetic field of 0 - 130 mT. And we have investigated quench characteristics in current limiting elements and between elements of YBCO films in applied magnetic field. The result of the experiments show that the presence of applied magnetic fields induces uniform quench distribution fur the stripes in element at $50V_{rms}$, otherwise non-uniform quenches were observed. And simultaneous quenches between elements were investigated at $150V_{rms}$. We suggest that suppressing the critical current by increased fields due to fault current effectively forced the stripes of higher $J_{c}$(0) to quench, resulting in equalizing quench times.s.s.s.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.529-530
• /
• 2006

Manufacturing industry is changing rapidly. Prototyping with rapid manufacturing is a part of every business in many companies and prototypes are used efficiently as a part of the production development process. Sheet metal forming has traditionally been a technology area where prototyping has been extremely expensive and efficient options for low volume have been limited. This paper describes the process for incremental sheet forming technologies to make the prototype for a brake dust shield of vehicles, which includes the remodeling method to make a base mold and tool path for sheet metal forming and 5-axes laser cutting machine to trim the prototype product.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.498-504
• /
• 2011

The flapping characteristics and advance ratios at torque equilibrium state of autorotation were investigated when the airspeed, shaft angle, and pitch angle were varied. To simulate the airspeed increase, the aerodynamic data analyzed by using the compressible Navier-Stokes solver and Pitt/Peters inflow theory were used. Transient Simulation Method(TSM) was used to catch the torque equilibrium states. The maximum flapping angles at torque equilibrium state were correlated to the airspeed, shaft angle, and pitch angle. By comparing flapping behavior to the variation of advance ratio, the phenomenon that the extension of reverse flow area of retreating blade affects the characteristics of autorotation was qualitatively considered.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.222-227
• /
• 2020

Purpose: The primary purposes of this study were to identify the degree of the effect size and the variables related to it on the effects of physical therapy on myofascial pain syndrome. Methods: This study collected 15 studies published between 2008.01.01 and 2019.12.31. The Analysis results confirmed 57 effect size data. The random-effect model was chosen because of the heterogeneity of the data. Results: First, the full case showed the largest mean effect size of 2.03 (p<0.001). Second, the size of the effect, according to the handson intervention, was 2.74 (p<0.003). Third, the VAS showed an effect size of 2.30 (p<0.001). Fourth, the intervention period showed a 1- to 15-day effect size of 2.94 (p<0.001). The number of interventions showed a 6 to 10 effect size of 2.84 (p<0.006). The number of participants showed a 10 or less effect size of 2.66 (p<0.001). Finally, the 'Trim and Fill' result confirmed that the calibration effect size was 0.93 (p<0.001). Conclusion: Physical therapy had a great effect on myofascial pain syndrome in the neck and shoulders, and that the effect differed according to the methods of the intervention and the methods of evaluation.