• 제어로봇시스템학회논문지
• /
• 제15권7호
• /
• pp.742-752
• /
• 2009

Engineering design involves the specification of many variables that define a product, how it is made, and how it behaves applied to computer, communication and control fields. Before some variables can be determined, other variables must first be known or assumed. This fact implies a precedence order of the variables, and of the tasks of determining these variables consequently. Moreover, design of complex systems may involve a large number of design activities. In this paper, the activity-activity incidence matrix is considered as a representation of design activity analysis which mainly focuses on the precedence constraint with an object of doing IDEF3 in process-centered view. In order to analyze the activity-activity incidence matrix, a heuristic algorithm is proposed, which transforms an activity-activity, parameter-formula, and parameter-parameter incidence matrix into a lower triangular form. The analysis of the structured matrices can not only significantly reduce the overall project complexity by reorganizing few critical tasks in practice, but also aims at obtaining shorter times considering the solution structure by exploring concurrency.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.470-476
• /
• 2005

Ultra light metal structures have been studied for several years because of their superior specific stiffness, strength and potential of multi functions. Many studies have been focused on how to manufacture ultra light metal structures and optimize them. In this study, we introduced a new idea to make sandwich panels having octet truss cores. Wires bent in a shape of triangular wave were assembled to construct an Octet truss core and it was bonded with two face sheets to be a sandwich panel. The bending & compressive strength and stiffness were estimated through elementary mechanics for the sandwich specimens with two kinds of face sheets and the results were compared with the ones measured by experiments. Some aspects of assembling and mechanical behavior were discussed compared with Kagome core fabricated from wire, which had been introduced in the authors' previous work.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.36-41
• /
• 2001

In order to simulate wake of stator and a gas turbine engine's balde row, acryl cylinder and a linear turbine cascade were used respectively in this study. Experimental of heat transfer distributions was done on the passage endwall and blade suction surface. Temperature distributions on the experimental regions were obtained through image processing system by using the cholesteric type liquid crystal which has chain structure of metyl$(CH_3)$. To represent the degree of heat transfer, dimensionless St number was used. The results show that heat transfer on the blade suction surface was increased due to the wake from the cylinder and was decreased as the distance between cylinder row and blade row increases. Because of groth of passage vortex, heat transfer distributions on the trailing edge area showed triangular shape which was little changed with wake. On the other hand, heat transfer on the passage endwall was decreased due to the wake from cylinder. As the distance between cylinder row and blade row increases, heat transfer was more decreased.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.347-358
• /
• 2000

The view dependency of typical spatial-partitioning based NC simulation methods is overcome by polygon rendering technique that generates polygons to represent the workpiece, thus enabling dynamic viewing transformations without reconstruction of the entire data structure. However, the polygon rendering technique still has difficulty in realizing real-time simulation due to unsatisfactory performance of current graphics devices. Therefore, it is necessary to develop a mesh decimation method that enables rapid rendering without loss of display quality. In this paper. we proposed a new mesh decimation algorithm thor a workpiece whose shape varies dynamically. In this algorithm, the 2-map data thor a given workpiece is divided into several regions, and a triangular mesh is constructed for each region first. Then, if any region it cut by the tool, its mesh is regenerated and decimated again. Since the range of mesh decimation is confined to a few regions, the reduced polygons for rendering can be obtained rapidly. Our method enables the polygon-rendering based NC simulation to be applied to the computers equipped with a wider range of graphics cards.

• Nuclear Engineering and Technology
• /
• 제20권1호
• /
• pp.35-46
• /
• 1988

원자로의 설계나 안전성 분석을 위해서는 핵연료 집합체 내의 유동 구조와 열전달에 대한 지식이 매우 중요하다. 따라서 핵연료 집합체 내의 유체 온도 분포를 정확히 계산하기 위해서는 냉각재 유로 내에서의 속도분포를 정확히 알아야 하는데 이것은 복잡한 난류 현상 때문에 예측하기가 매우 어렵다. 본 연구는 비등방성을 고려한 2-방정식 모형을 사용하여 속도분포를 구하고 핵연료 표면에서의 균일열속을 가정하므로써 유로내에서의 속도 분포를 예측하였다. 수치해는 Galerkin유한 요소법에 의해 핵연료봉 표면까지 구하여졌다. 수치 결과는 알려진 실험치 및 계산치와 비교되어 잘 일치하고 있고, 또한 난류 비등방성이 유로 내의 평균속도와 온도분포에 영향을 미치고 있음을 보았다. 그리고 조밀한 삼각 배열 핵연료 집합체(P/D=1.05-1.3) 내에서 나트륨 냉각재를 사용한 경우의 Nu-P/D관계식을 수립하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권3호
• /
• pp.325-338
• /
• 2015

Experimental and numerical investigations were conducted to identify the wake characteristics downstream of two vane-type vortex generators over laminar flat plate boundary layer. Experimental study was carried out by using the stereoscopic particle image velocimetry. To describe the flow field around the vortex generator in detail, numerical study was performed. We considered two different planform shapes of vortex generator: triangular and rectangular shape. The height of the generator was chosen to be about the boundary layer thickness at the position of its installation. Two different lengths of the generator were chosen: two and five times the height. Wake measurements were carried out at three angles of attack for each configuration. Wake characteristics for each case such as overall vortical structure, vorticity distribution, and location of vortex center with downstream distance were obtained from the PIV data. Wake characteristics, as expected, were found to vary strongly with the geometry and angle of attack so that no general tendency could be deduced. Causes of this irregular tendency were explained by using the results of the numerical simulation.

• Applied Microscopy
• /
• 제24권2호
• /
• pp.1-11
• /
• 1994

The book lung in the wolf spider, Pardosa astrigera was consisted of a series of flattened triangular-shaped air sacs, stacked with about 70 sheets, and was located in the ventrolateral region of opisthosoma. Each hemolymph spaces (average $8{\mu}m$ in thickness) surrounded by the air sacs (average $6{\mu}m$ in thickness). The air sacs was supported by cylindrical cuticular spikes of microfibril bundles. Epithelial cell processes surrounded the hemolymph spaces. The nuclei of the epithelial cells were concentrated near the atrium. In the middle portion of air sac, the epithelial cells formed pillars across the hemolymph spaces and spot desmosome and zonula adherens were seen between the plasma membranes. In the hemolymph space of this spider, granular hemocytes (average diameter $8{\mu}m$) were the most dominant type of hemocytes. In the medial sinus, the hemolymph flow between the air sacs of a paired book lungs and then flow out of the lung vein. The air comes in the atrium through the ventral lung slit and makes a tidal wave in and out of the air sacs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.271-271
• /
• 2010

Using ab initio density functional theory, we investigate the dimerization and one-dimensional (1-D) polymerization of metal-encapsulated gold nanoclusters, M@$Au_{12}$ (M=W, Mo) and their structural and electronic properties. M@$Au_{12}$ clusters with a magic number 13 can form icosahedral and cuboctahedral structures. We consider various dimer configurations with different compounds and symmetries to find the most stable dimer structure in each case. Au atoms in the one cluster, which participate directly in dimerization, tend to form triangular bonds together with counterpart Au atoms in the other. It is found that both M@$Au_{12}$ and M@$Au_{12}$ clusters are stabilized by about 3 eV due to dimerization. We also calculate and compare the electronic and magnetic properties of different dimerized clusters. Based on our investigation on dimerization, we further study on 1-D polymerization of M@$Au_{12}$ with different compounds and symmetries. We will also discuss their formation energies as well as their electronic and magnetic properties.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.317-322
• /
• 2005

This study is aimed to analyze the effects of heat pipe shape on the heat transfer in solar collector with a axial grooved heat pipe. In the design of a heat pipe. two of the most important criteria to be met are the operating temperature range and the maximum heat transport capacity, When the operating temperature range is known and the working fluid has been selected, the maximum heat transport capacity depends strongly on capillary pressure and liquid flow. The heat transport capacity of the heat pipe will depend on the geometry of the heat pipe, the wick structure. the vapor channel shape. groove number. cooling temperature. condenser length and pipe diameter. So various shapes are used for mathematical models of two-phase flow in grooved heat pipe. From the results. the adequate groove shape and scale are presented by considering the heat transport and capillary limitation.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2089-2104
• /
• 1995

A novel and efficient cutter path planning method for machining intricately shaped curved surfaces, called the steepest directed tree method, is presented. The curved surface is defined by triangular facets, the density and structure of which are determined by the intricacy and form accuracy of the surface. Geometrical form definition and recognition of the topological features are used to connect the nodes of the triangulated surface meshes for the successive and interconnected steepest pathways, which makes good use of end milling characteristics. The planetary cutter centers are determined to locate along smoothly changing paths and then the height values of the cutter are adjusted to avoid surface interference. Several machined examples of intersecting and intricate surfaces are presented to illustrate the benefits of the new approach. It is shown that due to more consistent geometry matching between cutter and surface(in comparison with the current CC Cartesian method) surface finish can be typically improved. Moreover, the material in concave fillets which is difficult to be removed by ball mills can be removed efficiently. The built-in positioning of cutter to avoid interference runs minutely in the sharp and discontinuous regions. The steepest upward movement of the cutter gives a stable dynamic cutting state and allows increase in the feedrate and spindle speed while remaining the stable cutting state.