• 한국물환경학회지
• /
• 제28권6호
• /
• pp.813-818
• /
• 2012

BOD and COD are currently used for water quality indices, but adoption of TOC for TMDL (Total Maximum Daily Load) is being suggested. Estimation of TOC using existing BOD and COD data is very important to diagnosis water quality trend when TOC is used for water quality index of organic matter in the future. The relationships between BOD COD and TOC in runoff from paddy fields were investigated during 2008-2011. The observed mean concentration of EMCs (Event Mean Concentration) for BOD, COD, TOC were 3.87, 10.97, 7.26 mg/L respectively. The correlation coefficients between BOD-TOC and COD-TOC were 0.42, 0.73, respectively. The coefficient of determination of regression equation for BOD-TOC and COD-TOC were 0.18, 0.53 respectively. Even though, conversion of COD data to TOC seems to be rather reliable than that of BOD-TOC, further monitoring is recommended to ensure better interpretation of relationship among BOD, COD and TOC.

• 수산해양기술연구
• /
• 제32권3호
• /
• pp.266-272
• /
• 1996

The distribution and abundance of fish in the Cheju southeastern area was studied by the combined hydroacoustic and bottom trawl surveys in April 1994 and in July 1995, respectively. The main purpose of these investigations was to provide the basic data for this management and the biomass estimation of commercially important demersal fish stocks in this area. The hydroacoustic surveys were performed by using a 50 kHz scientific echo sounder system with a microcomputer-based echo integrator. Acoustical measurements of fish abundance and distribution were conducted along the cruise tracks of research vessel and during all trawl hauls by continuous echo sounding. The average weight-normalized target strength for demersal fish aggregations was derived from the relationship between the mean volume backscattering strength for the depth strata of trawl hauls and the weight per cubic meter of trawl catches. The geographical distribution of fish stocks in the 1994 survey area was investigated in relation to oceanographic conditions. The results obtained can be summarized as follows: 1. From the 1994 and 1995 survey data, the relationship between the mean volume backscattering strength (, dB) for the depth strata of trawl hauls and the weight (W, kg/$m^3$) per cubic meter of trawl catches was expressed by the following equation = - 32.8+ lOlog(W) The average weighted-target strength value at 50 kHz derived from this equation was .. 32.8 dB/kg. 2. In 1994 and 1995, both surveys showed a trend of decreasing fish abundance toward the southern area of the Cheju Island with high densities offish along the west coast ofth.e Tsushima Island. The highest demersal concentrations in the southern area of the CheJu Island appeared in bottom waters colder than $12^{\circ}C.$. . 3. From the results of combined bottom trawl and hydroacoustic surveys, the estunated fish densities in the southeastern area of the Cheju Island were 1.5488 x $10^-4$kg/$m^3$ in the 1994 surveyand 1.9498 x $10^-4$kg/$m^3$ in the 1995 survey, respectively.

• 디지털융복합연구
• /
• 제18권3호
• /
• pp.139-147
• /
• 2020

정보통신기술의 융합에 따른 4차 혁명의 파고가 거세지고 있는 가운데 블록체인 기반 플랫폼의 활용범위가 크게 확장되고 있다. 이에 이 연구는 블록체인 기반 금융 플랫폼에 초점을 맞춰 플랫폼 이용자의 수용의도를 결정하는 요인을 탐색하고자 하였다. 특히, 이 연구는 블록체인 기반 플랫폼에 대한 이용자 수용의도에 관한 결정요인 탐색에서 금융 플랫폼을 대상으로 했다는 점 그리고 플랫폼 이용자 수용의도가 남녀 간 성별 차이가 있는지를 확인하는데 연구의 초점을 맞춰 살펴봤다는 점에서 의의가 있다. 이는 블록체인과 관련해 이용자의 수용의도를 탐색하는 것은 금융업계뿐 아니라 블록체인 기술 개발자에게 매우 중요한 사안이기 때문이다. 연구방법은 474명(남성 262명, 여성 212명)이 참여한 설문조사 결과를 토대로 구조방정식 모형을 적용하여 블록체인 기반 플랫폼의 이용자 수용의도 구조를 탐구하였다. 연구결과, 블록체인 기반 금융 플랫폼 이용자의 수용의도 결정요인으로서 혁신성, 편의성, 보안성, 선호성이 작동하는 것으로 나타났고, 이중 혁신성과 편의성 요인에서 남녀 성별 차이에 따른 수용의도 결정요인이 차이가 있음이 확인되었다.

• 한국정보통신학회논문지
• /
• 제18권12호
• /
• pp.2939-2945
• /
• 2014

본 연구에서는 대칭 및 비대칭 산화막 구조를 가진 이중게이트(double gate; DG) MOSFET의 문턱전압 변화에 대하여 분석하였다. 상하단 동일한 산화막 두께을 갖는 대칭 DGMOSFET와 달리 비대칭 DGMOSFET는 상하단 게이트 산화막 두께를 다르게 제작할 수 있다. 그러므로 비대칭 DGMOSFET에서 상단과 하단게이트 산화막 두께의 크기 변화에 따라 대칭 DGMOSFET와 문턱전압을 비교하여 상하단 게이트 산화막 두께의 최적값에 대하여 고찰하고자 한다. 문턱전압을 구하기 위하여 포아송방정식에서 해석학적 전위분포모델을 유도하였으며 도핑분포함수는 가우스분포함수를 사용하였다. 문턱전압 모델을 이용하여 하단게이트 전압, 채널길이 및 채널두께 등에 따라 상하단게이트 산화막 두께가 문턱전압에 미치는 영향을 관찰하였다. 결과적으로 문턱전압은 상하단 게이트 산화막 두께에 따라 크게 변화하였으며 변화하는 경향은 하단게이트 전압, 채널길이 그리고 채널두께에 따라 매우 상이하게 나타나고 있다는 것을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.760-768
• /
• 2017

The transition temperature shift (TTS) of the reactor pressure vessel materials is an important factor that determines the lifetime of a nuclear power plant. The prediction of the TTS at the end of a plant's lifespan is calculated based on the equation of Regulatory Guide 1.99 revision 2 (RG1.99/2) from the US. The fluence factor in the equation was expressed as a power function, and the exponent value was determined by the early surveillance data in the US. Recently, an advanced approach to estimate the TTS was proposed in various countries for nuclear power plants, and Korea is considering the development of a new TTS model. In this study, the TTS trend of the Korean surveillance test results was analyzed using a nonlinear regression model and a mixed-effect model based on the power function. The nonlinear regression model yielded a similar exponent as the power function in the fluence compared with RG1.99/2. The mixed-effect model had a higher value of the exponent and showed superior goodness of fit compared with the nonlinear regression model. Compared with RG1.99/2 and RG1.99/3, the mixed-effect model provided a more accurate prediction of the TTS.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.313-321
• /
• 2019

The prediction of the hydrodynamic performance of a planing hull vessel is an important and challenging topic for computational fluid dynamic (CFD) applications to naval hydrodynamics. In this paper, the resistance and planing attitude analysis for a Fridsma hull, which is a prismatic planing hull, in still water are numerically studied using OpenFOAM. OpenFOAM is an open source code package based on C++ libraries and the finite volume method (FVM) for the discretization of the RANS equation. The volume of fluid method (VOF) is used to capture the water-air interface and the SST ${\kappa}-{\omega}$ model is used for the turbulence simulation. The overset mesh method is used to capture the large motion of the hull at higher speeds. Before the extensive analysis, uncertainty analyses using various time steps and grid sizes were performed for one ship speed case of Fn = 1.19. The results of the present study are compared with those of a model test, other CFD research, and Savitsky's empirical formula. The results of the present study, following the trend of other CFD results, slightly over predict the resistance and under predict the sinkage and, more significantly, the trim.

• 한국물환경학회지
• /
• 제27권6호
• /
• pp.905-913
• /
• 2011

This study was conducted to characterize the discharge feature of pollutant load from the upper and lower watershed influencing on the water quality of South Han River using the empirical equation and Factor Analysis. The results of regression analysis between flow rate and pollutant load were as follows. In the streams of the upper watershed of South Han river, $BOD_5$ and $COD_{Mn}$ were increased as the flow rate was increased. Also, steep increases in SS and TP were observed with positive correlation with the flow rate while change in TN was slightly shown. On the other hand, in the streams of the lower watershed of South Han river, $BOD_5$ was negatively correlated with the flow rate, being decreased with the increase in the flow rate. However, changes in $COD_{Mn}$, TN, SS, and TP showed a similar trend with those observed in the upper watershed. With Factor Analysis of the water quality and various components, it was appeared that the flow rate, SS, and TP were significantly correlated each other and they were indicated as the principal component influencing on water quality in the streams of the upper watershed. In contrast, $BOD_5$, $COD_{Mn}$ and TOC were significantly correlated each other and they were included as the principal pollution component of the streams in the lower watershed. From these results, it was conclusive that the upper watershed of South Han River was mainly affected by non point source pollutants while the lower watershed was influenced by point source pollutants from the developed areas.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.104-114
• /
• 2022

The purpose of using coolant in machining is both to increase a tool life and also to prevent product deformation and thus, stabilize the surface quality by lubricating and cooling the tool and the machining surface. However, a very small amount of cutting mist should be used because chlorine-based extreme pressure additives are used to generate environmental pollutants in the production process and cause occupational diseases of workers. In this study, medical titanium alloy (Ti-6Al-7Nb) was subjected to a processing experiment by selecting factors and levels affecting cutting power in the processing of the Aerosol Dry Lubrication (ADL) method using vegetable oil. The machining shape was a slot to sufficiently reflect the effect of the cutting depth. As for the measurement of cutting force, the trend of cutting characteristics was identified through complete factor analysis. The factors affecting the cutting force of ADL slot processing were identified using the reaction surface analysis method, and the characteristics of the cutting force according to the change in factor level were analyzed. As the cutting speed increased, the cutting force decreased and then increased again. The cutting force continued to increase as the feed speed increased. The increase in the cutting depth increased the cutting force more significantly than the increase in the cutting speed and the feed speed. Through the reaction surface analysis method, the regression equation for predicting cutting force was identified, and the optimal processing conditions were proposed. The cutting force was predicted from the secondary regression equation and compared with the experimental value.

• 한국농공학회지
• /
• 제39권4호
• /
• pp.106-113
• /
• 1997

Dynamic loading of structures often causes excursions of stresses well into the inelastic range, and the influence of the geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. A structure in a nuclear power plant is a structure of importance which puts emphasis on safety. A nuclear container is a pressure vessel subject to internal pressure and this structure is constructed by a reinforced concrete or a pre-stressed concrete. In this study, the material nonlinearity effect on the dynamic response is formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion is numerically solved by a central difference scheme. The constitutive relation of concrete is modeled according to a Drucker-Prager yield criterion in compression. The reinforcing bars are modeled by a smeared layer at the location of reinforcements, and the steel layer model under Von Mises yield criteria is adopted to represent an elastic-plastic behavior. To investigate the dynamic response of a nuclear reinforced concrete containment structure, the steel-ratios of 0, 3, 5 and 10 percent, are considered. The results obtained from the analysis of an example were summarized as follows 1. As the steel-ratio increases, the amplitude and the period of the vertical displacements in apex of dome decreased. The Dynamic Magnification Factor(DMF) was some larger than that of the structure without steel. However, the regular trend was not found in the values of DMF. 2. The dynamic response of the vertical displacement and the radial displacement in the dome-wall junction were shown that the period of displacement in initial step decreased with the steel-ratio increases. Especially, the effect of the steel on the dynamic response of radial displacement disapeared almost. The values of DMF were 1.94, 2.5, 2.62 and 2.66, and the values increased with the steel-ratio. 3. The characteristics of the dynamic response of radial displacement in the mid-wall were similar to that of dome-wall junction. The values of DMF were 1.91, 2.11, 2.13 and 2.18, and the values increased with the steel-ratio. 4. The amplitude and the period of the hoop-stresses in the dome, the dome-wall junction, and the mid-wall were shown the decreased trend with the steel-ratio. The values of DMF were some larger than those of the structure without steel. However, the regular trend was not found in the values of DMF.

• 한국수자원학회논문집
• /
• 제42권2호
• /
• pp.117-129
• /
• 2009

전지구적 기온상승으로 인해 증발량이 증가할 것으로 예견되었으나, 다양한 지역에서 관측된 팬증발량은 지난 수십 년간 뚜렷한 감소추세를 나타내고 있다. 본 연구에서는 1960년부터 2007년까지 관측된 국내 18개 기상관측소의 팬증발량과, 증발에 관련된 강수량, 온도, 상대습도, 풍속, 일조시간, 일조율에 대한 변화를 분석하였다. 분석결과 팬증발량은 뚜렷한 감소현상을 나타내었으며, 강수량과 온도는 증가추세를, 상대습도, 풍속, 일조시간, 일조율은 감소추세를 나타내었다. 특히, 일조시간과 일조율의 감소추세는 팬증발량과 지역적으로 상당히 일치하고 있음을 확인하였다. 산점도를 그려 상관관계를 확인해본 결과, 일조시간과 일조율은 팬증발량과 양의 상관관계를 강하게 나타내고 있으며, 강수량의 경우는 팬증발량과는 음의 상관관계가 존재하였다. 강릉관측소 사례연구에서 Penman공식에 의해 추정된 개방된 수면에서의 증발량은 팬증발량에서 보인 것 같은 뚜렷한 하향추세가 검증되지 않아, 기존에 팬증발량 관측값으로부터 증발량을 추정하는 것은 장기적인 증발량 변화를 검토하기 위해서는 부적절함을 확인하였다. 마지막으로 팬증발량이 실제증발량과 서로 상호보완적 관계를 갖기 때문에, 팬증발량이 감소하더라도 실제증발량은 증가할 수 있음을 설명하였다.