• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.5
• /
• pp.233-238
• /
• 2012

The effect of subzero treatment on the mechanical properties of cold rolled high manganese austenitic stainless steel was investagated. ${\alpha}$'-martensite was formed by cold rolling, and it was formed with surface relief and specific direction or crossing each other. The volume fraction of martensite increased by subzero treatment, and it was increased with longer time of subzero treatment and higher temperature of subzero treatment. The hardness and strength increased by subzero treatment, while the elongation decreased. With the increase of volume fraction of martensite, the hardness and strength was increased steeply with proportional relationship, elongation was decreased slowly. The results show that the hardness and strength was strongly controlled by the volume fraction of martensite, and the elongation was affected by transformation behavior of deformation induced martensite in the initial stage of deformation.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.236-241
• /
• 2008

Hair manicure is usually and widely operated in the area of hair-dyeing by the reason that acidic hair color is less damaged and more stable than other chemical color treatment. However, there is no an in-depth study to prove them. This study purposes to provide basic resources for effectively using products of hair manicure by experiments on Physical Properties of Hair. Hair of one healthy woman in mid-20's, Level 4, was sampled for experiments. For the tests, hair samples were classified by the frequency of hair manicure treatment The control group(a), once treatment(b), twice(c), three times(d), four times(e) and five times(f). The results were measured with Scanning Electron Microscopy(SEM) and Tensile Strength and Elongation test. The lower Values of Tensile Strength according to repeated hair manicure treatment. Elongation is not affected by the frequency of hair manicure treatment. There was no remarkable change of hair surface in once(b) and twice(c) treatment. The change of hair surface which was able to judge by cuticle layers looseness, tunics and the transformation of cuticle cell were observed in the hair samples operating more than three times(d) of hair manicure treatment.

• Journal of Oral Medicine and Pain
• /
• v.9 no.1
• /
• pp.5-10
• /
• 1984

Author could get the result as below after ultrasound treatment, one of the pain relieving method, to 40 patients in whom author could confirm the objective improvement of symptoms among the patients who visited SNUH between April first, and October 31st. 1984, because of TMJ pain. 1. The average number of treatment were 6.5 times/pt, and treatment duration was 15minutes. 2. The severities of pain before the treatment were distressing (50.0%), discomfort (25.0%) mild (15.0%) and horrible (10.0%), but the percentages of them became changed to discomfort (45.0%), mild (30.0%), distressing (20.0%), and none (5.0%) after treatment. 3. The activities of mouth opening before treatment were severely restricted (50.0%) moderately restricted (37.5%) and slightly ristricted (12.5%), but the percentages of them became changed to slightly restricted (50.0%), moderately estricted (25.0%) severely restrictely(12.5%) and normal (12.5%) after treatment. 4. The effect of the pain upon one's personality before treatment were severely upset (55.0%), moderately upset(37.5%) and slightly upset(7.5%), but the percentages of them became changed to slightly upset(50.0%), normal(25.5%), moderately upset(12.5%) and severely upset (12.5%) after treatment.

• Journal of Oral Medicine and Pain
• /
• v.9 no.1
• /
• pp.23-28
• /
• 1984

Author could get the result as below after EGS(an electrical nerve stimulator) treatment, one of the pain-reliaving methods, to 30 patients in whom author could confirm the objective improvement of symptoms among the patients who visited SNUH between July the first and December the 31th. 1984. because of TMJ pain. 1. The average number of treatment were 5.5 times/pt., and mean treatment duration was 20 minutes. 2. The severities of pain before the treatment were distressing (46.7%), discomforting (26.7%), mild (20.0%) and horrible (6.7%), but the percentages of them became changed to mild (50%), discomforting (33.3%), none (10%) and distressing (6.7%) after treatment. 3. The activities of mouth opening before the treatment were moderately restricted (53.3 %), serverely restricted (33.3%) and slightly restricted (13.3%), but the percentages of them became changed to slightly restricted (66.7%), normal (16.7%), modorately restricted (13.3%) and severely restricted (3.3%) after treatment. 4. The effects of the pain upon one's personality before treatment were severely upset (43.3%), moderately upset (36.7%), slightly upset(16.7%) and normal (3.3%), but the percentages of them became changed to slightly upset (50%), normal (33.3%), morderately upset (10%) and severely upset (6.7%) after treatment.

• Journal of Korea Foundry Society
• /
• v.20 no.3
• /
• pp.173-180
• /
• 2000

The microstructure changes of the matrix and the graphites were observed by optical microscope and the average hardness number was investigated according to the heat-treatment conditions of the cast iron rods by the horizontal continuous casting process in 35 mm diameter. The three kinds of heat-treatments were introduced. The first treatment was performed at 900, 950, and $1000^{\circ}C$ for 2 hours and the second treatment was conducted during 5, 10, and 15 hours at $1000^{\circ}C$ respectively. The third treatments were the two-cyclic heat-treatment and the three-cyclic heat-treatment at $1000^{\circ}C$ during 2 hours. The matrix microstructure of the specimens to be treated at various temperatures for 2 hours was the ferrite to be transformed from the pearlite The hardness number of the center of the samples according to the heat treatment time at $1000^{\circ}C$ was higher than that of the surface area because of the martensite formation in the center. Also, in the cyclic heat-treatments, the hardness number of the two-cycle treatment specimens increased because of the martensite formation in the center.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.256-260
• /
• 2001

This study was carried out to investigate effect of ultrasonic treatment on the quality of frying chicken meat. Moisture content of ultrasonic treated leg meat was lowest to 59.7%, moisture content of breast meat was higher than leg meat and protein content of control was higher than ultrasonic treatment. Fat content of ultrasonic treatment was higher than control and leg meat was higher than breast meat. Hunter's L (lightness) and a (redness)-value was not different between frying methods, but L-value of breast meat and a-value of leg meat was higher than leg and breast meat, respectively. Hunter's b (yellowness)-value was not different among frying chicken meats. Frying loss of ultrasonic treatment was significantly lower than control, water holding capacity was higher than control. VBN content of ultrasonic treatment was comparatively higher than control, TBA number of ultrasonic treatment was highest to 0.78mg malonaldehyde/kg. Hardness, springiness and cohesiveness of frying chicken meat was not different between frying methods, but difference of chicken muscle parts were significantly showed. Chewiness was not different among frying chicken meats and shear force value of control breast meat was lowest to 1.9kg. In case of sensory score, aroma and taste of frying chicken meat were out different between frying methods, but texture, juiciness and palatability of ultrasonic treatment were higher than control and that of breast meat were higher than leg meat.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.4
• /
• pp.55-64
• /
• 2008

In this study, the management and improvement of public small-scale sewage treatment facilities was investigated. In order to improve the effective management of the operation of small-scale sewage treatment facilities, treatment methods and the problems associated with sewage treatment were carefully addressed based on the data and literature. The investigation results showed that sewer pipes in rural areas should be repaired to prevent sewage from leaking and small-scale operations should be required to have effective management for pollutant loads less than 50%. Also, new methods should be developed for low concentrations of sewage. A law associated with FRP treatment facilities should be established and local governments need to supervise these operations to avoid insufficient and faulty construction. It is recommended that new facilities are built with advanced treatment techniques when the old facility can not comply with nitrogen and phosphorous discharge limits. Moreover, the study shows that nutrient and coliform treatment efficiency improves when abandoned facilities are renovated with the installation of nitrification/denitrification and disinfection processes or another advanced process.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.881-888
• /
• 2007

In order to investigate the characteristics of the non-biodegradable material, the $BOD_5/COD_{Cr}$ ratio was used. The average ratio of industrial complex's influent wastewater was 2.29~2.96, the effluent ratio was 4.29~19.0. The removal efficiency of $UV_{254}$ by physicochemical treatment was 22.8~94.7% and 5.3~77.2% by biological treatment, respectively. Of the wastewater removal efficiency for each of the items, the $BOD_5$ treatment efficiency was the greatest at 97.3% and the color & TN treatment efficiency was 40~70%. The study of the economical assessment showed that the complex as well as the individual companies spent 722~1,298 won for each ton of treated wastewater. All of the wastewater treatment facilities spent the most money on chemicals needed to treat the wastewater. The total cost for Nylon manufacturing wastewater treatment plant was the greatest while the total cost for cotton manufacturing wastewater treatment plant turned out to the lowest. As respects of removal efficiency and economocal assessment, Polyester A and Cotton manufacturing wastewater treatment plants were better effective than a dyeing industrial complex wastewater treatment plant.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.21-27
• /
• 2020

PURPOSE: This study investigated the efficacy of interferential current (IFC) treatment on the improvement of pain, disability, and balance in patients with chronic nonspecific low back pain. METHODS: A double-blind randomized clinical trial was conducted with 40 patients with chronic nonspecific low back pain. The patients were randomly allocated into two groups: the IFC treatment group (n = 20) and the placebo treatment group (n = 20). The IFC group received 30 minutes of IFC treatment on the lumbar region, while the placebo group received IFC treatment without real electrical stimulation. The intervention was administered five days a week for two weeks. RESULTS: The primary outcomes of resting pain and pain during functional movement were measured by a visual analogue scale. The secondary measurements included the Oswestry disability index (ODI) for low back pain and postural sway. The measurements were performed before and after the two-week intervention period. Compared to the placebo treatment group, the IFC treatment group showed significantly greater improvement in pain during anterior trunk flexion in the standing position (p = .029), ODI (p = .039), and postural sway when subjects stood with their eyes closed (p = .010) at the end of the intervention. CONCLUSION: Our findings show that IFC treatment can improve pain, disability, and postural sway, thus, highlighting the benefits of somatosensory stimulation from IFC.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.125-141
• /
• 2004

The purpose of this study was to assess the effectiveness of myofascial release(MFR) technique and Taping therapy on the pain level in whiplash injury patients. Pain level were assessed prior treatment, after first treatment, after second treatment, after third treatment, after fourth treatment, and after fifth treatment. All 6 times were calculated pain level. To find out the effectiveness of MFR and Taping therapy, we were divide two groups. The one group was consisted of 25 patients that were treated with H/P, electrical therapy and MFR, and the other group was consisted of 25 patients that were treated with H/P, electrical therapy, and Taping therapy. The results were as follow: 1. There were statistical significance on the pain level in MFR group during all treatment periods(p<0.05). 2. There were statistical significance on the pain level in Taping group all during treatment periods(p<0.05). 3. Taping group had more statistical significance than MFR group on the pain level during all treatment periods(p<0.05). Consequently, this study suggest that Taping therapy has a very effectiveness to the whiplash injury patients.