• Journal of ILASS-Korea
• /
• v.24 no.4
• /
• pp.178-184
• /
• 2019

Diesel engines have the advantages of higher thermal efficiency and lower CO2 emissions than gasoline engines, but have the disadvantages that particulate matter (PM) and nitrogen oxides (NOx) emissions are greater than those of gasoline engines. In particular, nitrogen oxides (NOx) emitted from diesel engines generates secondary ultrafine dust (PM2.5) through photochemical reactions in the atmosphere, which is fatal to humans. In order to reduce nitrogen oxides (NOx), pre-treatment systems such as EGR, post-treatment systems such as LNT and Urea SCR have been actively studied. The Urea SCR consists of an injection device injecting urea agent and a catalytic device for reducing nitrogen oxides (NOx). The nitrogen oxide (NOx) reduction performance varies greatly depending on the urea uniformity in the exhaust pipe. In this study, spray characteristics according to the spray hole structure were confirmed, and the influence of spray uniformity on spray characteristics was studied through engine evaluation.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.257-264
• /
• 2010

Though existent a transcranial magnetic stimulation makes various treatment and diagnostic sine waveform of fixed stimulation pulse, there is limitation. In this research, because strength, pulse width, pulse pattern required in treatment and diagnostic introduce other Cockroft-Walton circuit and half bridge inverter frequency and voltage variable become new device propose wish to. Have more advantages than existing device. First, do not have high voltage transformer. Second, switching loss can be less, and control output energy precisely. Three, stimulation strengths, pulse width, pulse pattern are various. As a result, sought special quality and an experiment that is improved applying inverter and cockroft - Walton circuit is half bridge inverter that do not use transformer.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.2
• /
• pp.110-115
• /
• 2012

Ankylosed tooth is defined as 'the discontinuance of normal passive tooth eruption without any mechanical barrier'. Ankylosed tooth treatment is a challenge to dental clinicians. In treatment of maxillary molar ankylosis cases there are risks of oro-antral fistula, displacement of root fragments into the maxillary sinus, as well as the necessity for providing additional sinus bone augmentation for future implant placement. In this study, we suggested a new technique using a piezoelectric device and a lateral side approach to the maxillary sinus leading to the simultaneous removal of the ankylosed maxillary molar and sinus grafting for the purpose of implant site development.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.37-49
• /
• 2000

It was clinically important to substitute the physiologic centric relation to the therapeutic position of the patients who needed the oral rehabilitation or occlusal treatment. There were several methods for recording the centric relation. One of the known methods was to use the gothic arch tracer. However the existing intraoral device was difficult to adjust the three dimensional angulation of the recording plate and recording stylus depending on the hinge movement arch of the individual. The purpose of this study was to develop new intraoral tracer which had adjustable stylus within hinge movement arch for the record of centric relation and to evaluate the clinical application of this device. The results were as follow; 1. A stylus of new developed intraoral tracer was so adjustable that the recording of mandibular positions could be reproducible within the hinge movement arc. 2. A record plate of new developed intraoral tracer was so adjustable to parallel with the occlusal plane that lateral recording of mandibular position was able to obtain stably. This study showed that new developed intraoral tracer allowed the determination of the treatment position which can be used in the full mouth rehabilitation and occlusal treatments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.486-486
• /
• 2013

Silicon nanowire devices fabricated by bottom-up methods are attracted due to their electrical, mechanical, and optical properties. Especially, to functionalize the surface of silicon nanowires by molecules has received interests. The changes in the characteristics of the molecules is delivered directly to the surface of the silicon nanowires so that the silicon nanowire can be utilized as an efficient read-out device by using the electronic state change of molecules. The surface treatment of the silicon nanowire with light-sensitive molecules can change its optical characteristics greatly. In this paper, we present the optical response of a SiNW field-effect-transistor (FET) conjugated with porphyrin molecules. We fabricated a SiNW FET and performed porphyrin conjugation on its surface. The characteristic and the optical response of the device shows a large difference after conjugation while there is not much change of the surface in the SEM observation. It attributed to the existence of few layer porphyrin molecules on the SiNW surface and efficient variation of the surface potential of the SiNW due to light irradiation.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1359-1360
• /
• 2006

lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.239-244
• /
• 2015

Chemical mechanical polishing (CMP) is one of the most important processes for enabling sub-14 nm semiconductor manufacturing. Moreover, post-CMP defect control is a key process parameter for the purpose of yield enhancement and device reliability. Due to the complexity of device with sub-14 nm node structure, CMP-induced defects need to be fixed in the CMP in-situ cleaning module instead of during post ex-situ wet cleaning. Therefore, post-CMP in-situ cleaning optimization and cleaning efficiency improvement play a pivotal role in post-CMP defect control. CMP in-situ cleaning module normally consists of megasonic and brush scrubber processes. And there has been an increasing effort for the optimization of cleaning chemistry and brush scrubber cleaning in the CMP cleaning module. Although there have been many studies conducted on improving particle removal efficiency by brush cleaning, these studies do not consider the effects of brush contamination. Depending on the process condition and brush condition, brush cross contamination effects significantly influence post-CMP cleaning defects. This study investigates brush cross contamination effects in the CMP in-situ cleaning module by conducting experiments using 300mm tetraethyl orthosilicate (TEOS) blanket wafers. This study also explores brush pre-treatment in the CMP tool and proposes recipe effects, and critical process parameters for optimized CMP in-situ cleaning process through experimental results.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.303-309
• /
• 2020

A vehicle's differential gear is a device designed to allow the vehicle's outer wheels to turn faster than the inner wheels when turning on a curve. The differential gear case is the main component of the differential gear system, which is composed of ring gear, pinion gear and side gear, and is fastened by pinion shaft pins. The differential gear case rotates when the vehicle is running, so balancing calibration is very important. In this study, a balancing machine that can diagnose and correct the differential gear case and mass imbalance of various rotating bodies was designed. The differential gear case was rotated at high speed to accurately diagnose the location and value of the unbalanced mass, and it was designed to be balanced and corrected by removing the unbalanced mass by drilling. After calibration, it was confirmed that the unbalanced value of all the measured samples was reduced to less than 180g.mm, and the unbalance reduction ratio was improved to 60~70%.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.121-125
• /
• 2019

Chronic exposure to atrazine (ATR) raises concerns about adverse effects on reproductive functions. We tested our previously validated filtering device, the OBP-based filter, onto a biological model constituted of cultured swine granulosa cells treated for 48 h with media conditioned with 0.1 or $10{\mu}M$ ATR evaluating cell viability and steroidogenesis. The tested atrazine concentrations did not change granulosa cell viability and no filtering effects was observed following treatments with media prepared with differently filtered water. As for steroidogenesis, treatment of water with OBP-based filter containing $10{\mu}M$ atrazine completely suppressed the stimulatory effect of $10{\mu}M$ atrazine on progesterone production as well as the inhibitory effect of $0.1{\mu}M$ ATR on estradiol-$17{\beta}$ production by granulosa cells. Our data demonstrate that the impairment of steroidogenesis induced by ATR is effectively removed after water filtration in the experimental device thus suggesting potential use in biotechnological applications on living cells and/or organisms.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.5
• /
• pp.224-229
• /
• 2019

PVD coating is a technology that can be applied to various industries, and is widely used for processing molds and machinery, improving performance of core parts, and extending the life. Therefore, there is a need for a research on a device and a process technology that can adjust the performance to suit each application. In this study, a PVD coating device with ion density control was used to deposit a coating layer on SKD 11, a cold die steel, with magnetron currents of 1 A, 2 A, 3 A at arc currents of 80 A, 100 A, 130 A. It examined the mechanical properties for each condition. Increasing the arc current and magnetron current could improve the thickness, adhesion, and hardness of the coating layer. Especially, When the magnetron current was high, it suppressed the droplets that could be generated by the high arc current, showing excellent surface uniformity and adhesion of the coating layer.