• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.599-615
• /
• 2022

In order to excavate underground tunnel most safely such as Han river, the slurry shield TBM method is applied to cope with face of high water pressure for many metro projects. In downtown subway project most of excavated soil is discharged externally whereas in road construction excavated soil is used as filling materials so it becomes important factor for success of the project. After excavated soil, weathered rock and soft rock are discharged with bentonite through discharge pipe to slurry treatment plant then those soils are separated in separation plant according to those size. Fine grained soil has been discarded together with filter cake but it is not toxic and can be mixed with coarse aggregate in proper ratio so this study is performed to find use of qualified filling material to meet quality standard. Therefore, in this study, legal standards and quality standards for the utilization of excavated soil of the slurry shield TBM method were examined and test was conducted to derive recycling way for filter cake and aggregate. And a plan for using it as a filling material for road construction was derived. Because bentonite is a clay composed of montmorillonite, and the excavated soil in the tunnel is also non-toxic, disposal of this material can waste social cost so it is expected to be helpful in the underground space development project that carries out the TBM project by recycling it as a valuable resource.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.637-658
• /
• 2022

TBM tunnel is simple with the iterative process of excavating the ground, building a segment ring-build, and backfilling. Drill & Blast, a conventional tunnel construction method, is more complicated than the TBM tunnel and has some restrictions because it repeats the inspection, drilling, charging, blasting, ventilation, muck treatment, and installation of support materials. However, the preparation work for excavation requires time and cost based on a very detailed plan compared to Drill & Blasting, which reinforces the ground and forms a tunnel after the formation of tunnel portal. This is because the TBM equipment for excavating the target ground determines the success or failure of the construction. If the TBM, an expensive order-made equipment, is incorrectly configured at the assembly stage, it becomes difficult to excavate from the initial stage as well as the main excavation stage. When the assembled shield TBM equipment is dismantled again, and a situation of re-assembly occurs, it is difficult throughout the construction period due to economic loss as well as time. Therefore, in this study, the layout and plan of the site and the assembly process for each major part of the TBM equipment were reviewed for the assembly of slurry shield TBM to construct the largest diameter road tunnel in domestic passing through the Han River and minimized interference with other processes and the efficiency of cutter head assembly and transport were analyzed and improved to suit the site conditions.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.664-670
• /
• 2021

Stainless steel was applied as bipolar plate (BP) of polymer electrolyte membrane fuel cell (PEMFC) due to high mechanical strength, electrical conductivity, and good machinability. However, stainless steel was corroded and increased contact resistance resulting PEMFC performance decrease. Although the corrosion resistance could be improved by surface treatment such as noble metal coating, there is a disadvantage of cost increase. The stainless steel corrosion behavior and passive layer influence on PEMFC performance should be studied to improve durability and economics of metal bipolar plate. In this study, SUS316L bipolar plate of 25 cm² active area was manufactured, and experiments were conducted for corrosion behavior at an anode and cathode. The influence of SUS316L BP corrosion on fuel cell performance was measured using the polarization curve, impedance, and contact resistance. The metal ion concentration in drained water was analyzed during fuel cell operation with SUS316L BP. It was confirmed that the corrosion occurs more severely at the anode than at the cathode for SUS316L BP. The contact resistance was increased due to the passivation of SUS316L during fuel cell operation, and metal ions continuously dissolved even after the passive layer formation.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.960-968
• /
• 2021

Since microalgae research started on late 18 century, they have been recognized as one of the most important bioresources used in bioindustry. Owing to the large efforts paid to industrial application of this microorganisms, their importance on food/feed and bioactive compounds has been further extending into the environmental research areas including alternative energy resources, mitigation of the carbon emission, and waste-water treatment. However, despite the importance on their industrial application, the fundamental research field related to the long-term preservation of microalgae culture has not received much attention. However, a less labor intensive and cost-efficient preservation technology enabling biologically active and stable microalgae-culture provides a key success factor in the biotechnological application. Therefore, this study investigated various cutting-edge microalgae cryopreservation technologies currently developed so far, mainly targeting Chlorophyta, which occupies the largest taxon in the classification system of microalgae. In addition, for the development of successful cryopreservation technique, the key factors such as temperature control effect and preservative effect during cryopreservation of microalgae culture were investigated. In addition, the problems with current preservation technology that is being used in Korean domestic biological resource banks and the international microalgal resource banks are described. According to our investigation, currently no standard method for long-term preservation of microalgae is available due to their various morphological and physiological characteristics. To overcome such issues, much more efforts on fundamental research area on the identification of specific biomarker used for microalgae taxonomical classification and further systemic approaches based on strain-specific cryopreservation methods needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.1049-1060
• /
• 2021

Objective: This study assessed the effect of different levels of xylanase, β-glucanase and phytase on intestinal enzyme activities and tibia bone development in broiler chickens fed wheat-based diets. Methods: Twelve experimental diets were formulated using a 3×2×2 factorial design (three doses of phytase and two doses of both xylanase and β-glucanase) and offered to 648 day-old Ross 308 male chicks having 6 replicates groups with 9 birds per replicate and lasted for 35 days. Results: An interaction between the enzymes products improved (p<0.01) the activity of chymotrypsin. Protein content at d 10 was highest (p<0.001) with addition of phytase while general proteolytic activity (GPA) (p<0.02) and lipase activity (p<0.001) were decreased. At d 24, there were improvements in protein content (p<0.01) and lipase (p<0.04) with supplementation of superdose phytase. Addition of superdose phytase decreased in chymotrypsin (p<0.02), trypsin (p<0.01) and GPA (p<0.001). The optimum dose of xylanase decreased the chymotrypsin activity (p = 0.05), while the GPA (p<0.001) was increased with the optimum level of β-glucanase. Superdose phytase supplementation at d 10 improved maltase (p = 0.05), sucrase (p<0.001) and alkaline phosphatase (p<0.001) activities in the jejunum while aminopeptidase activity was highest (p<0.005) with the low level of phytase. Protein content of jejunum mucosa was bigger (p<0.001) in birds fed superdose phytase while maltase activity (p<0.001) at d 24 was reduced by this treatment. Sucrase (p<0.04) and aminopeptidase activities (p<0.001) improved when diets supplemented with low levels of phytase. Tibia bone breaking strength was highest (p<0.04) with addition of low level of superdose phytase or optimum level of β-glucanase. Bone dry matter content decreased (p<0.04) when diets supplemented with phytase. Conclusion: From the results obtained in this study, supplementation of superdose phytase was the most effective, however, the cost-benefit analysis of the use of such a dose needs to be evaluated.

• Tuberculosis and Respiratory Diseases
• /
• v.82 no.1
• /
• pp.27-34
• /
• 2019

Background: Understanding the burden of disease is important to establish cost-effective treatment strategies and to allocate healthcare resources appropriately. However, little reliable information is available regarding the overall economic burden imposed by chronic obstructive pulmonary disease (COPD) in Korea. Methods: This study is a multicenter observational research on the COPD burden in Korea. Total COPD costs were comprised of three categories: direct medical, direct non-medical, and indirect costs. For direct medical costs, institutional investigation was performed at 13 medical facilities mainly based on the claims data. For direct non-medical and indirect costs, site-based surveys were administered to the COPD patients during routine visits. Total costs were estimated using the COPD population defined in the recent report. Results: The estimated total costs were approximately 1,245 million US dollar (1,408 billion Korean won). Direct medical costs comprised approximately 20% of the total estimated costs. Of these, formal medical costs held more than 80%. As direct non-medical costs, nursing costs made up the largest percentage (39%) of the total estimated costs. Costs for COPD-related loss of productivity formed four fifths of indirect costs, and accounted for up to 33% of the total costs. Conclusion: This study shows for the first time the direct and indirect costs of COPD in Korea. The total costs were enormous, and the costs of nursing and lost productivity comprised approximately 70% of total costs. The results provide insight for an effective allocation of healthcare resources and to inform establishment of strategies to reduce national burden of COPD.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.2
• /
• pp.297-308
• /
• 2021

Objective : Shunt infection is a common complication while treating hydrocephalus. The antibiotic-impregnated shunt catheter (AISC) was designed to reduce shunt infection rate. A meta-analysis was conducted to study the effectiveness of AISCs in reduction of shunt infection in terms of age, follow-up time and high-risk patient population. Methods : This study reviewed literature from three databases including PubMed, EMBASE, and Cochrane Library (from 2000 to March 2019). Clinical studies from controlled trials for shunt operation were included in this analysis. A subgroup analysis was performed based on the patient's age, follow-up time and high-risk population. The fixed effect in RevMan 5.3 software (Cochrane Collaboration) was used for this meta-analysis. Results : This study included 19 controlled clinical trials including 10105 operations. The analysis demonstrated that AISC could reduce the infection rate in shunt surgery compared to standard shunt catheter (non-AISC) from 8.13% to 4.09% (odds ratio [OR], 0.48; 95% confidence interval [CI], 0.40-0.58; p=0.01; I2=46%). Subgroup analysis of different age groups showed that AISC had significant antimicrobial effects in all three groups (adult, infant, and adolescent). Follow-up time analysis showed that AISC was effective in preventing early shunt infections (within 6 months after implant). AISC is more effective in high-risk population (OR, 0.24;95% CI, 0.14-0.40; p=0.60; I2=0%) than in general patient population. Conclusion : The results of meta-analysis indicated that AISC is an effective method for reducing shunt infection. We recommend that AISC should be considered for use in infants and high-risk groups. For adult patients, the choice for AISC could be determined based on the treatment cost.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.314-323
• /
• 2021

The purpose of this study is to analyze the status of medical service use of foreigners living in Korea by their nationality and types of national health insurance. As of 2018, 1,058,886 people were extracted from the qualification DB, excluding people whose insurance premium is missing. The data analysis showed that nearly 78% of foreigners with national health insurance used medical services and the countries with the largest number of users were China, Vietnam, and the United States. The total cost of treatment per capita was highest in the United States regardless of hospitalization and outpatient. The number of medical treatments per person, and the medical expenses of outpatients & inpatients services were highest among the regionally-insured and the length of stay per person was highest among the workers' dependents. Lastly, it was found that Chinese and regionally-insured received much more benefits than other groups compared to the premium they pay. After July 2019, foreign nationals residing in Korea for six months or longer are obligated to enroll in the national health insurance program. Since the latest data was in 2018, the result did not properly reflect the current situation, but it is meaningful that it made basic data for future comparative analysis.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.75-87
• /
• 2021

Type I Interferons (IFNα) are known for their role as biological anticancer agents owing to their cell-apoptosis inducing properties. Development of an appropriate, cost-effective host expression system is crucial for meeting the increasing demand for proteins. Therefore, this study aims to develop codon-optimized IFNα-2b in L. lactis NZ3900. These cells express extracellular protein using the NICE system and Usp₄₅ signal peptide. To validate the mature form of the expressed protein, the recombinant IFNα-2b was screened in a human colorectal cancer cell line using the cytotoxicity assay. The IFNα-2b was successfully cloned into the pNZ8148 vector, thereby generating recombinant L. lactis pNZ8148-SP_Usp45-IFNα-2b. The computational analysis of codon-optimized IFNα-2b revealed no mutation and amino acid changes; additionally, the codon-optimized IFNα-2b showed 100% similarity with native human IFNα-2b, in the BLAST analysis. The partial size exclusion chromatography (SEC) of extracellular protein yielded a 19 kDa protein, which was further confirmed by its positive binding to anti-IFNα-2b in the western blot analysis. The crude protein and SEC-purified partial fraction showed IC₅₀ values of 33.22 ㎍/ml and 127.2 ㎍/ml, respectively, which indicated better activity than the metabolites of L. lactis NZ3900 (231.8 ㎍/ml). These values were also comparable with those of the regular anticancer drug tamoxifen (105.5 ㎍/ml). These results demonstrated L. lactis as a promising host system that functions by utilizing the pNZ8148 NICE system. Meanwhile, codon-optimized usage of the inserted gene increased the optimal protein expression levels, which could be beneficial for its large-scale production. Taken together, the recombinant L. lactis IFNα-2b is a potential alternative treatment for colorectal cancer. Furthermore, its activity was analyzed in the WiDr cell line, to assess its colorectal anticancer activities in vivo.