• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.2 no.2
• /
• pp.69-78
• /
• 2007

Objectives : The purpose of this report is to examine the effects of acupuncture treating and chuna treating to A-Shi point of iliopsoas muscle on lumbar stenosis and leg length inequality. Methods : We investigated one patient suffering from lumbar stenosis, which came to Sung-Min Oriental Medicine Clinic from December 4, 2006 to March 3, 2007. And we operated acupuncture treating and chuna treating to A-Shi point of iliopsoas muscle. Results : That patient's subjective symptoms such as lumbago, right leg weakness and right leg numbness have improved. Conclusions : Acupuncture treating and chuna treating to A-Shi point of iliopsoas muscle were associated with improvement of lumbar stenosis and leg leng inequality.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.1
• /
• pp.125-135
• /
• 2013

Objectives : Medical treating with eating foods is one of important therapies in East Asian traditional medical knowledge and is referred as a therapy to treat diseases through foods. Since the food cannot be separated from ordinary people living, the medical treating with eating foods is a therapy with strong locality and contains many autogenous parts. Methods : Recently, the world is showing much interest for genetic resources, and the concept of intellectual property is rapidly expanding as the field of 'new knowledge property right' as well. Thus, the knowledge of medical treating with eating foods recently draws much attention in the economic aspect beyond the scholarly interest for traditional medicine. Here, I would like to summarize and report the contents related to medical treating with eating foods on "Yi, SeikKan experience prescriptions" which was discovered before. Results & Conclusions : First, medical treating with eating porridge on "Yi, SeikKan experience prescriptions" is classified into one with nonglutinous rice as the main ingredient and the other with other grains as the main ingredient. It is differently utilized depending on the nature of the grain. Second, medical treating with eating rice on "Yi, SeikKan experience prescriptions" was born from our nation's unique way of living and is classified into one way to eat rice mixed with ground medicinal herbs, another one to cook and eat rice with mixed grains and the other way to use as the external application. Medical treating with eating rice is assumed to replace the meal. Third, "food section" was given separately and discussed in this book. There were some parts different from existing medical knowledge due to the accumulation of experience using medicinal herbs. Fourth, we should pay attention to experience a book on medicine where vibrant medical information has been recorded in order to discover and process our traditional knowledge resources as a useful form.

• Journal of Pharmacopuncture
• /
• v.12 no.1
• /
• pp.43-51
• /
• 2009

Objective : The purpose of this study is to present the standard for practical application of ginger herbal pharmacopuncture Material and Methods : We refer to ancient literatures and the recent papers for ginger. Conclusions : The following results have been obtained 1. The effect of ginger(Zingiber officinale Roscoe) is to "release exterior", "balance nutrient & defensive qi", "resolve phlegm", "arrest coughing", "warm the lungs". So ginger herbal pharmacopuncture can be applied to treating fever, chilling sign, headchae, snuffle and gasping cough due to cold affection and treating the symptoms like sputum and asthma that be revealed by pulmonary disease. 2. The effect of ginger is to "warm spleen and stomach", "arrest vomiting" "promote normal flow of water". So ginger herbal pharmacopuncture can be applied to treating nausea, vomiting, abdominal distension and diarrhea due to phlegm & dampness and treating edema. 3. The effect of ginger is to eliminate blood stasis. So ginger herbal pharmacopuncture can be applied to treating contusion, blood stasis, sprain and gynecologic disease. 4. Ginger can treat myalgia and pain due to wind-damp and have anti-inflammatory effect in pharmacology. So ginger herbal pharmacopuncture can be applied to treating disease of joint, ligament and muscle. 5. Ginger can resolve phlegm and resuscitate. So ginger herbal pharmacopuncture can be applied to treating unconsciousness. But, treating incipient cardiovascular accident, it needs to call your special attention to the danger of blood pressure increase. 6. In pharmacology, ginger is effective for antitumor, antioxidant effects and activating immunocyte. So ginger herbal pharmacopuncture can be applied to treating broadly varieties of tumor and allergic disease.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.56-67
• /
• 1987

Plywoods used for construction as a decorative interior material are inflammable and can make fire accidents, causing destruction of human life and property. Therefore, it is indeed required to make fire-retardant treated plywood. In this study, 3.7mm yellow meranti plywoods were soaked in 18% boric acid solutions and tap water by hot-cold bath for 1/2, 2/2, 4/2, 6/2 hours and redrying of treated plywoods was carried out by press drying at the platen temperature of 110, 130, 160, $180^{\circ}C$ and then it was conducted to investigate solution absorption, drying rates, dynamic young's modulus. specific gravity and fire-retardant factors such as burning point, flame spread length. flame exhausted time, back side carbonized area and weight loss by treating time, treating solutions and platen temperature. The results are as follows; 1. When plywood was impregnated with the hot bath temperature of $70^{\circ}C$ for 1. 2, 4, 6 hours and the cold bath temperature of $15^{\circ}C$ for 2 hours respectively, retentions of boric acid were 1.565, l.597, 1.643, 1.709kg/$(30cm)^3$ and all of them exceeded the minimum retention [1.125kg/$(30cm)^3$] even in the shortest treatment. 2. In hot-cold bath method for 1/2 hours, the drying rates of treated plywood remarkably increased with the extension of platen temperature of 110, 130, 160, $180^{\circ}C$ and the values of boric acid treated plywood were 5.900, 10.196, 45.42, 54.958m.c%/min and the values of water treated plywood were 6.014, 12.373, 46.520, 55.730m.c%/min and drying rates of water treated plywood were faster than those of boric acid treated plywood. 3. The values of boric acid treated plywoods in dynamic young's modulus were widely higher than those of water treated plywoods. And it can be observed that there were highly significant differences for treating time between dynamic young's modulus, and the values of boric acid plywoods increased with the extension of treating time but on the contrary water treated plywoods were decreased values with prolonged time 4. It was observed that there were highly significant differences for platen temperature between dynamic young's modulus. When the values of water treated plywoods in dyna nic young's modulus were abruptly decreased according to the rise of platen temperature. boric acid treated plywoods showed rather increased values at $160^{\circ}C$ of platen temperature. And in 2- way interactions, there were also highly significant for dynamic young's modulus between treating time x treating solutions and platen temperature x treating solutions. 5. Correlation coefficients of fire-retardant factors were shown in table 5. It could be recognized that there were close correlations between the treating solutions and burning point, flame spread length, back side carbonized area, flame exhausted time and weight loss, but there was no correlation between fire-retardant factors and treating time and platen temperature. 6. From table 6, it can be observed that there were highly significant differences for burning point, flame spread length, flame exhausted time, back side carbonized area, weight loss between treating solutions. And in 2-way interactions, there were highly significant for burning point, flame spread length, weight loss between treating time $\times$ treating solutions.

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.266-272
• /
• 2002

This research is compared and analyzed variations of the heavy metal contents in human hairs according to treating permanent wave manipulation before and after and permanent wave agents. This is the survey of women's hairs in 19 years old. On the basis of this we would like to analyze a extend of exposing of heavy metal scientifically. Also, we would to show a basic data for the permitted limits of heavy metal to keep the healthy hair The conclusion is as follows.; Mean contents of heavy metal in hairs is 2.11 ppm (Pb), 0.25 ppm (Cd), 2.62 ppm (Ni), 256 ppm (Zn), 8.45 ppm (Cu). In reducing agents (processing lotions) of perm, 1.50 ppm (Pb), 0.03 ppm (Cd), 0.05 ppm (Ni), 15.45 ppm (Zn), 0.86 ppm (Cu) in a perm (S), 2.30 ppm (Pb), 0.05 ppm (Cd), 0.05 ppm (Ni), 13.05 ppm (Zn), 0.65 ppm (Cu) in a perm (T). In oxidizing agents (neutralizer) of perm, 1.40 ppm (Pb), 0.03 ppm (Cd), 0.09 ppm (Ni), 9.05 ppm (Zn), 0.65 ppm (Cu) in a perm (S), 1.50 ppm (Pb), 0.02 ppm (Cd), 0.16 ppm (Ni), 8.00 ppm (Zn), 0.85 ppm (Cu) in a perm (T). Mean contents of lead(Pb) didn't show significant differences according to treating cysteine perm agents, showed it according to 3 treating thioglycolic acid perm agents (p<0.05). Mean contents of cadmium(Cd) showed significant differences (p<0.001) according to 2 treating both perm agents. Mean contents of nickel (Ni) showed neither. Mean contents of zinc (Zn) showed significant differences according to 2 treating cysteine perm agents (p<0.001) and 1 treating thioglycolic acid perm agents (p<0.01). Mean contents of copper (Cu) didn't show significant differences according to treating cysteine perm agents, showed it according to 1 treating thioglycolic acid perm agents (p<0.001).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.405-410
• /
• 2011

The heat treatment of the steel is very important part on the forging industry. It is also effect to price competitiveness. The burner control system of the heat treating furnace is related LNG gas saving and fixed manufactured goods rate. This study show the burner control performance of the heat treating furnace. The result developed the performance of the heat treating furnace and show energy saving.

• Korean Journal of Acupuncture
• /
• v.29 no.2
• /
• pp.250-259
• /
• 2012

Objectives : In this study, it has aimed to search cupping therapy standardization research course by reviewing former studies. Methods : It has reviewed articles about cupping therapy, published in South Korea. Review focused on cupping therapy treating methods. Results : Articles about cupping therapy is slightly increasing. Clinical study was the most popular study method. It has most used non-bleeding cupping therapy, and bleeding cupping therapy is next. Treating time was very various and there were no tendency or trends about treating time. Pressure inside cup has used from 30 mmHg to 600 mmHg, and pressure of 600 mmHg used mostly. Conclusions : As a result of this study, it is considered that data and standard about pressure and treating time is required. And it should be focus on pressure and treating time to standardizing cupping therapy.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.2
• /
• pp.113-121
• /
• 2015

Objective : This study was aimed to classify diseases that Traditional Chinese Medicine(TCM) is better at treating. Method : Literature was searched on China National Knowledge Infrastructure(CNKI) and categorized according to literature type, published date and research method. Studied six types of research papers and four types of published books. Results : Experts were surveyed and interviewed, medical records were studied retrospectively, and doubleblind method was used in selecting diseases that TCM was better at treating. There were a total of 372 diseases that TCM was better at treating. By the KCD classification, 45 were in gastrointestinal (12.1%), 39 in urogenital (10.5%), 36 in circulatory (9.7%), 35 in musculoskeletal or connective tissues (9.4%). Conclusion : Total of 372 diseases were classified as diseases that TCM was better at treating, and if the results are used adequately, the values of western and TCM can be maximized and benefit the government, patients and the medical practitioners.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.99-106
• /
• 1999

This research was carried out to investigate chemical pretreatment using lime and limestone in treating abandoned mine drainage with anaerobic treatment. If treating lime with abandoned mine drainage, after 2day, pH was increased to 5.6, and $SO_4^{2-}$, Fe, Al, Pb and Mn were removed 5.7%, 63%, 57, 45% and 28%, respectively. It was estimated that lime dosage was 2,000mg/L for increasing to pH 7. If treating limestone with abandoned mine drainage, after 2day, pH was increased to 3.67, and $SO_4^{2-}$, Fe, Al, Pb and Mn were removed 4.7%, 26%, 22% 18% and 8%, respectively. It could be showed that limestone did slowly react with temperature increasing. If treating anaerobic limestone packing column with abandoned mine drainage, for experimental period, average pH was 4.51, and average $SO_4^{2-}$, Fe, Al, Pb and Mn were removed 4.5%, 15.3%, 20.1%, 23.7% and 5.87%, respectively. So, it would not be suitable for abandoned mine drainage. But if utilizing limestone as pretreatment process for treating abandoned mine drainage with SRB, because it did initally neutralize abandoned mine drainage, it could forward to stabilize system.