• Title/Summary/Keyword: treatability

Search Result 91, Processing Time 0.024 seconds

Column filled with Fe-GAC and GAC to remove both As(V) and Fe(III) (비소와 철 동시제거를 위한 Fe-GAC와 GAC로 충진된 컬럼)

  • Lee, Yong-Soo;Do, Si-Hyun;Hong, Seong-Ho
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.30 no.1
    • /
    • pp.87-97
    • /
    • 2016
  • First of all, Fe or/and Mn immobilized granular activated carbons (Fe-GAC, Mn-GAC, (Fe, Mn)-GAC) were synthesized and tested to remove arsenate (As(V)). The results in batch test indicated that Fe-GAC removed As(V) effectively, even though the surface area of Fe-GAC was reduced largely. Moreover, adsorption isotherm test indicated that the experimental data fit well with Langmuir model and the maximum adsorption capacity ($q_{max}$) of Fe-GAC for As(V) was $3.49mg\;g^{-1}$, which was higher than GAC ($2.24mg\;g^{-1}$). In column test, the simulated water, which consisted of As(V), Fe(III), Mn(II) and Ca(II) in tap water, was used. Fe-GAC column with 1 hr of pre-washing time treated As(V) effectively while GAC column removed Fe(III) better than Fe-GAC column. Moreover, the increasing pre-washing time from 1 to 9 hour in Fe-GAC column enhanced Fe(III) removal with little negative impact of As(V) removal. Mostly, the column filled with Fe-GAC and GAC (i.e. the mass ratio of Fe-GAC:GAC = 2:8) showed the higher treatability of both As(V) and Fe(III), even it operated with 1 hr pre-washing time.

Isolation and Characterization of Benzene-degrading Bacteria. (Benzene 분해 세균의 분리와 특성연구)

  • 김정현;유재근;이형환
    • Microbiology and Biotechnology Letters
    • /
    • v.16 no.5
    • /
    • pp.379-383
    • /
    • 1988
  • To evaluate the treatability of activated sludge induced by benzene with microorganisms, isolation and characterization of benzene-degrading microorganisms were carried out. Six bacterial isolates from the activated sludge were identified ; Pseudomonas fluorescens, Enterobacter agglomerans, Enterobacter cloacae, Klebsiella oxytoca, Citrobacter freundii and Klebsiella pneumoniae. P. fluorescens degraded 55% of benzene contained in the medium as a sole carbon source, E. cloacae 24%, E. agglomerans 41%, and K. oxytoca 32%. Optimal temperature, pH and benzene concentration for growth of P. fluorescens appeared to be 31$^{\circ}C$, pH 7.0, and 300mg benzene per liter. When the P. fluorescens was dominant in the activated sludge induced by benzene, the indicator protozoa was Aspidisca sp. When concentration of benzene was about 387mg per liter, the growths of Aspidisca sp. and Litonotus sp. were high. Protozoa, Litonotus sp. and Vorticella sp. did not grow over 1600mg of benzene per liter.

  • PDF

Arsenic removal from drinking water by direct contact membrane distillation

  • Zoungrana, Ali;Zengin, Ismail H.;Elcik, Harun;Yesilirmak, Dilara;Karadag, Dogan;Cakmakci, Mehmet
    • Membrane and Water Treatment
    • /
    • v.7 no.3
    • /
    • pp.241-255
    • /
    • 2016
  • In this study, the treatability of arsenic (As) contaminated water by direct contact membrane distillation (DCMD) at different delta temperatures (${\Delta}T$) 30, 40 and $50^{\circ}C$ has been investigated. Two different pore sizes ($0.22{\mu}m$ and $0.45{\mu}m$) of hydrophobic membranes made of polyvinylidene fluoride (PVDF) were used. The membrane pore sizes, the operating temperatures, the feed solution As concentration and conductivity have been varied during the experimental tests to follow the removal efficiency and flux behavior. Both membranes tested had high removal efficiency of arsenite (As (III)) and arsenate (As (V)) and all permeates presented As concentration far lower than recommended $10{\mu}g/L$ of world health organization (WHO). As concentration was below detection limit in many permeates. Conductivity reduction efficiency was over 99% and the transmembrane flux (TMF) reached $19L/m^2.h$ at delta temperature (${\Delta}T$) of $50^{\circ}C$ with PVDF $0.45{\mu}m$ membrane. The experimental results also indicated that $0.45{\mu}m$ pore sizes PVDF membranes presented higher flux than $0.22{\mu}m$ pore sizes membranes. Regardless of all operating conditions, highest fluxes were observed at highest ${\Delta}T$ ($50^{\circ}C$).

A Review on the Sihocheonggan-tang & Sihocheonggan-san for the treatablity of Atopic Dermatitis (국내 논문 검색을 통한 시호청간탕(柴胡淸肝湯)과 시호청간산(柴胡淸肝散)의 아토피 피부염 치료 가능성에 관한 고찰)

  • An, Jae-Hyun;Hwang, Mi-Lee;Yoon, Hwa-Jung;Jung, Hyun-A
    • The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
    • /
    • v.30 no.1
    • /
    • pp.10-16
    • /
    • 2017
  • Objectives : Atopic Dermatitis is a recurrent, chronic, allergic eczema with severe itching sensation. This study designed to research Sihocheonggan-tang & Sihocheonggan-san to find out treatability for atopic dermatitis. Methods : We got 14 search results with searching word '시호청간탕', '시호청간산' in 'OASIS', 'NDSL', 'RISS'. We classified these studies according to the type of study, diseases, treatment methods and treatment outcomes. Results : In the analysis of the diseases, Sihocheonggan-tang & Sihocheonggan-san was given for Eczema nummulare, Ermatitis seborrheica, Erythema multiforme, Eczema and Atopic dermatitis. In the analysis of the treatment methodes, the dosage form of Sihocheonggan-tang & Sihocheonggan-san was herbal medication, pill, granules and herbal medication & pill. In the analysis of the treatment outcomes, the symptoms of all patients were improved. In the experimental researches, it was proved that Sihocheonggan-tang & Sihocheonggan-san has effects that affect anti-inflammatory, skin protection and recovery of keratinocyte. Conclusions : For this study, we can consider Sihocheonggan-tang & Sihocheonggan-san is effective for atopic deramatitis. So, it is necessary to carry out clinical trial for Sihocheonggan-tang & Sihocheonggan-san in atopic dermatitis to evaluate safety and efficacy.

Effects of Heat Pre-Treatment and Reactor Configurations on the Anaerobic Treatment of Volatile Solids (열전처리와 반응조 형태가 고형 유기물의 혐기성 처리에 미치는 영향)

  • Hong, Young-Soek;Bae, Jae-Ho
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.10 no.2
    • /
    • pp.104-116
    • /
    • 1996
  • Anaerobic digestion is generally used for the treatment of volatile organic solids such as manure and sludge from waste water treatment plants. However, the reaction rate of anaerobic process is slow, and thus it requires a large reactor volume. To minimize such a disadvantage, physical and chemical pre-treatment is generally considered. Another method to reduce the reactor size is to adopt different reactor system other than CSTR. In this paper, the effects of heat pre-treatment and reactor configurations on the anaerobic treatability of volatile solids was studied. Carrot, kale, primary sludge, and waste activated sludge was chosen as the test materials, and the BMP method was used to evaluate the maximum methane production and first order rate constants from each sample. After the heat treatment at $130^{\circ}C$ for 30min., the measured increase in SCOD per gram VS was up to 394 mg/L for the waste activated sludge. However, the methane production potential per gram VS was increased for only primary and waste activated sludge by 17-23%, remaining the same for carrot and kale. The overall methane production process for the tested solids can be described by first order reactions. The increased in reaction constant after heat pre-treatment was also more significant for the primary and waste activated sludge than that for carrot and kale. therefore, the heat pre-treatment appeared to be effective for the solids with high protein contents rather than for the solids with high carbohydrate contents. Among the four reactor systems studied, CSTR, PFR, CSTR followed by PFR, and PFR with recycle, CSTR followed by PFR appeared to be the best choice considering methane conversion rate and the operational stability.

  • PDF

Performance Study on Pilot-scale Constructed Wetlands in order to Restore Contaminated Stream (오염하천의 정화를 위한 파일럿 규모의 인공습지 적용)

  • Kim, Seung-Jun;Choi, Yong-Su;Bae, Woo-keun
    • Journal of Korean Society on Water Environment
    • /
    • v.22 no.3
    • /
    • pp.546-556
    • /
    • 2006
  • The purpose of this study is to improve the polluted stream water quality by pilot-scale five different constructed wetlands (CWs). Cell 1 to 3 are newly designed 2SFCW (Surface-subsurface flow CW) with 1 to 3 flow shifters (FS) in the middle of the wetland system. Cell 4 and 5 are control CW (CCW), but Cell 5 is the same type as Cell 3. The FS, which converts the route of surface and subsurface flow between two wetlands connected in series, was able to enhance the treatability of TN via nitrification and denitrification and of SS due to filtration and sedimentation. The void fraction and dispersion number of Cell 1, 2 and 3 obtained from the RTD analysis were found to be 0.73 and 0.17, respectively. COD and TP removal efficiencies of Cell 1 to 3 were similar to that of Cell 4 and 5. SS removal efficiencies of Cell 1 to 3 and 5 with FS were 5-10% higher than that of Cell 4 without FS. TN removal efficiencies of Cell 1 to 3 were 3-14% higher than that of Cell 4 and 5. The average $R^2$ values of COD, SS, TN and TP obtained from nonlinear regression analysis were similar to the results of other researchers.

Advanced Wastewater Treatment Process Using Aerobic Granular Sludge (AGS-SBR) (호기성 그래뉼 슬러지를 이용한 하수고도처리기술(AGS-SBR))

  • Choi, Han Na;Mo, Woo Jong
    • Journal of Korean Society on Water Environment
    • /
    • v.37 no.1
    • /
    • pp.47-54
    • /
    • 2021
  • Aerobic granular sludge (AGS) can be classified as a type of self-immobilized microbial aggregates measuring more than 0.2 mm. It offers the option to simultaneously remove COD, N, and P that occur in different zones inside a granule. Also, AGS is characterized by high precipitability, treatability with high organic loading, and high tolerance to low temperature. In this study, a sequencing batch reactor inoculated with AGS (AGS-SBR) is a new advanced wastewater treatment process that was proven to grow AGS with integrated nutrient removal and low C/N ratio. A pilot plant, AGS-SBR with a capacity of 225 ㎥/d was installed at an S sewage treatment plant in Gyeonggi-do. The results of the operation showed that the water quality of the effluent indicated that the value of BOD5 was 1.5 mg/L, CODMn was 11.4 mg/L, SS was 6.2 mg/L, T-N was 13.2 mg/L, and T-P was 0.197 mg/L, and all of these values reliably satisfied an effluent standard (I Area). In winter, the T-N treatment efficiency at a lower temperature of less than 11℃ also showed reliability to meet the effluent standard of the I Area (20 mg/L or less). Analysis of microbial community in AGS showed a higher preponderance of beneficial microorganisms involved in denitrification and phosphorus accumulation compared with activated sludge. The power consumption and sludge disposal cost were reduced by 34.7% and 54.9%, respectively, compared to the domestic SBR type sewage treatment plant with a processing capacity of 1,000 ㎥/d or less.

Field Treatments of Small Diameter Logs Using Sap Displacement Method (I) - Feasibility of Treatment Using Transpiration Method and Butt-end Method - (수액치환법을 이용한 소경재의 산지처리(I) - 증산법과 원구법을 이용한 처리 가능성 -)

  • Chun, Su-Kyoung;Kim, Jae-Jin;Ra, Jong-Bum;Kim, Gyu-Hyeok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.30 no.4
    • /
    • pp.58-65
    • /
    • 2002
  • This research was carried out to develop field treatment techniques of thinned small diameter softwood logs and less utilized hardwood logs using sap displacement method. In this paper, we report the feasibility of using transpiration method and butt-end method for the treatment of three softwood species and three hardwood species with preservatives, fire-retardant chemicals, and dimensional stabilizer. Butt-end method was effective as a field treatment technique compared to transpiration method when considered the treatability, easiness of treatment, productivity of treated wood, and environmental aspects related to chemical treatment, regardless of the combination of wood species and chemicals.

Effects of Post Individualities on Treatability of Small Diameter Japanese Larch (Larix Leptolepis) with ACQ and CCA (낙엽송 원주상 소경목의 원목성상과 방부 처리성)

  • Kim, Yeong-Suk;Hong, Soon-Il;Yun, Jeong-Hee
    • Journal of the Korean Wood Science and Technology
    • /
    • v.34 no.1
    • /
    • pp.52-60
    • /
    • 2006
  • This study investigated how wood properties (i.e., annual rings, sapwood, heartwood, and cracks) might affect preservative treatment in Japanese larch (Larix leptolepis) round-wood product. We specially focused on small-diameter (~10 cm diameter) wood that is commercially sold in market. Among 100 wood samples, the groups of sample with 13~16, 17~20 annual rings represented 33 and 27 in each frequency, while 2~3 and 4~5 mm annual ring width accounted for 72 and 68 in frequency. More than a half (54%) of wood samples contained a mix of heartwood and sapwood in its surface. The rest (46%) had only heartwood exposed in the wood surface. A wide range of checks were showed in the wood samples, but the highest frequency was observed in samples with 1~6 surface (1~14 mm in size) checks and 1~4 end-grain (8~14 mm in size) checks in each round-wood sample. Pressure treatment resulted in a wide range of penetration of ACQ (Alkaline Copper Quat) into the wood, showing $4.3{\pm}4.19mm$ penetration in the wood samples contained a mix of heartwood and sapwood in its surface. However preservative treatment was much less effective for the heartwood only wood samples, ranging average 1.3 mm with ACQ and 1.1 mm with CCA (Chromated Copper Arsenate). These penetration results shown in heartwood samples did not meet the penetration standard that is required for H3 by the Korean Forest Service in relation to wood preservation treatment. These low penetration results were not significantly improved even if we incised wood samples to improve treatment effect, showing only small increase of 0.7 mm with ACQ and 0.6 mm with CCA. When preservative treatment was tested with heartwood, penetration of preservatives decrease with increase of annual rings per a cross-section area (r=0.5345). We also found that the length and number of check had no effect on preservative treatment, showing r=0.1301 and r=0.1802, respectively.

Biological Nutrient Removal using Porous Media (다공성 담체를 이용한 생물학적 영양물질 제거)

  • Cho, Chang-Sik;Lee, Sang-Houck
    • Journal of Digital Convergence
    • /
    • v.11 no.5
    • /
    • pp.237-243
    • /
    • 2013
  • This study aims to examine the modified $A^2/O$ process is useful to reduce the environmental pollution caused by nutrient in wastewater. Specific results are as follows: The removal rate was evaluated at each time period, ie., 18h, 8h, 6h, and 3h after the reaction started. The anoxic rate was more than 94-97% from 18h to 6h but was less than 50% before 6h. Thus, the test of nitrification was done using 6h as the optimal anoxic retention time and the aerobic retention time set at 24h. When the flow change was 1:1, the average ammonia concentration inputted was $30mg/{\ell}$. Returned top nitric acid solution and the concentration of ammonia solution falling into the anoxic reactor was about 50% of the initial concentration, and the flow change was 1:2, the concentration of ammonia falling into the anoxic reactor was about 62% of that of influxed ammonia. And the results of this study showed that the nitrogen removal rate can be improved by inputting untreated nitric acid and changing the flow of top nitrate solution using the modified $A^2/O$ method.