• 한국전자통신학회논문지
• /
• 제11권6호
• /
• pp.627-634
• /
• 2016

국내의 유로 도로에서 사용되는 차종 분류 장치는 차량의 윤폭과 윤거 정보를 산출하는 답판 센서를 사용하는 방식이 일반적이다. 이러한 답판 센서는 주행 중인 차랑의 바퀴가 접촉할 때 발생하는 충격으로 인해 높은 내구성을 요구한다. 최근 한국도로공사는 요금소에서 화물차 고속 차로의 운영을 시작하였고, 화물차가 고속 주행할 때 발생하는 설계 기준 이상의 충격으로 인한 파손과 이에 따른 유지보수 및 관리 비용의 증가가 염려되고 있다. 본 논문에서는 물리적 충격에 대한 내구성을 향상 시킨 무접점 답판 센서를 사용하여, 통과 차량에 대한 최적의 윤폭 / 윤거를 획득하는 알고리즘을 제안하였다. 이는 한국도로공사 6종 분류 기준 중, 축수 분류인 4, 5 종을 제외한 1종/2종/3종 그리고 6종 차량에 대해 현장 실험을 수행하였고, 윤폭 최대 오차 ${\pm}2cm$, 정확도 98% 이상 그리고 윤거 최대 오차 ${\pm}8cm$, 정확도 97% 이상으로 추후 차종 분류 장치 적용에 대한 그 유효성을 입증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.986-993
• /
• 2011

The role of brake is safely to transport passenger & cargo and stop vehicles at emergency in railway vehicle. Brake system reduces the speed by control command of electricity or air. mechanical methods to perform brake are disk brake & tread brake. This study targeted development of highly efficient sintered alloy brake shoe in railway vehicle whose high frictional coefficient, wear resistance, compatibility of the existing tread brake shoe & minimization of wheel's thermal damage and performed development of friction material's formulation, analysis of pressure distribution in wheel tread & brake shoe, optimum form design through analysis of heat flow.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.26-34
• /
• 2000

The new numerical procedure for hydroplaning has been developed by considering the following three important factors; fluid/structure interaction, tire rolling, and practical tread pattern. The tire was analyzed by FEM with Lagrangian formulation and the fluid is analyzed by FVM with Eulerian formulation. Since the tire and the fluid are modeled separately and their coupling is automatically computed by the coupling element, the fluid/structure interaction of the complex geometry such as the tire with the tread pattern can be analyzed practically. We verified the predictability of the hydroplaning simulation in the different parameters such as the water flow, the velocity dependence of hydroplaning, and the effect of the tread pattern on hydroplaning. In order to predict the streamline in the contact patch, the procedure of the global-local analysis was developed. Since the streamline could be predicted by this technology, we could develop the new pattern in a short period based on the principle; "make the stream line smooth".

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.164-170
• /
• 2003

The finite element analysis of tires has been conventionally performed by either neglecting tread pattern or modeling only circumferential grooves. Besides, the tire analysis has been mainly limited to static or steady state rolling analysis. In this paper, a transient dynamic analysis of a patterned tire rolling over a cleat with an explicit finite element program is presented. The patterned tire with detailed tread blocks is modeled by a systematic mesh generation procedure, in which tire body and tread pattern meshes are separately generated in the beginning and then both meshes are combined by the tie constraint method. The cleat impact analysis is conducted by using both the patterned tire and the smooth tire models to predict the cleat enveloping characteristics. It is seen that the analysis results of the patterned tire model are in a good agreement with the experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.596-599
• /
• 2008

Traditionally, tire made a role of function, which is supporting vehicle load, making brake, transferring traction, etc. But tire is a part of vehicle design, nowadays. In accordance with this market trend, customers need a wide tread design tire (i.e. low series tire). Generally low Series Tire means stiffer than general tire. That brings out increasing road noise. (Especially tire cavity resonance noise) Tire noise is divided in structure home noise and air borne noise. Tire cavity resonance noise (structure home noise) come from vibration between tire and vehicle. In the study, we investigated that tire cavity resonance noise is affected by stiffness of tread and sidewall.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.690-693
• /
• 2006

As the silence of vehicle is more important, noise reduction of tire is more required. Noise of tire is divided into structure home noise and air borne noise. Tire tread has the property such as Hardness. Pattern Noise is caused by changing of tread hardness. This property has influence on the mechanisms which are Block Impact & Stick-slip sound. In the study, we found that the effect of Hardness is related to more Stick-Slip than Impact.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1099-1107
• /
• 2009

Numerical simulation and experimental study to evaluate the critical speed of the railway bogie according to the tread inclination of wheel profile were conducted using 1/5 scale model. It has been shown that the results of the critical speed analysis for the scale bogie model is very close to the test results using scale bogie model and the critical speed is decreased in proportion to the increase of equivalent conicity of wheel profile. Results of this study show that the scale model could be applied to research area relating to vehicle stability as an alternative to overcome the experimental problems caused by full scale test on the roller rig.

• 타이어
• /
• 통권80호
• /
• pp.31-40
• /
• 1979

1976년에 실시예정이었던 미국의 타이어 품질등급제(UTQGS)가 79년 3월부터 실시될 것 같다. UTQGS란 ①Tread 마모성능, ②Traction 성능, ③고속성능 등에 대해서 각각의 품질등급을 타이어에 표시할 것을 의무화시켜, 사용자가 타이어를 구입하는 경우 선택하기 쉽도록 편의를 도모하기 위한 목적이다. 이것은 당초 76년 1월부터 실시될 예정이었으나, 주로 Tread 마모성능의 테스트 방법과 표시방법을 둘러싸고 미국 High Way 안전청(NHTSA)과 미국의 타이어 메이커 간에 소송까지 벌어져서 그 실시가 지연되었다. 제1심에서는 타이어 메이커 측이 패소하여 타이어 메이커는 즉시 상소하였으나, 기간 재판의 진행 상태로 보아 UTQGS가 실시될 정망이 농후해졌다. 그러나 NHTSA는 내년부터 실시되는 동법령중에서 Radial을 제외하고 있어서, 세계의 주류로 되어 있는 Radial 타이어를 제외 하는 것은 「UTQGS의 효과를 반감하는 것」이라는 비판이 나오고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.71-77
• /
• 2007

The surface of railway wheel tread in wheel-rail system can not be free from wear because of various circumstance such as railway condition, maintenance condition, weather condition, characteristics of wheel surface's geometrical shape, and vehicle suspension's structural characteristics etc. Therefore, the research on wear reduction and maintenance method are very important to ensure the safety of railway vehicle, to improve car comfort and to decrease maintenance cost. In this study, the wear rates of railway wheel have been periodically measured in terms of the running distance of Electrical Multiple Unit which have been currently operated and the microstructure transformation of wheel tread using replication method have been performed. The results show that the relations between the flange wear and tread microstructure are depended on running distance and it will supply basic data on wheel maintenance.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.105-116
• /
• 2003

The purpose of this study is to suggest the method of prevention of staircase accidents, and to make housing environment better through researching the dimension of a housing staircase for Korean. The scope and method of this thesis is to investigate the dimension limits of a staircase (slope, minimum width of tread, maximum height of riser), and to analyze the characteristics of foot condition (jutting rate, foot angle, ball joint, nosing clearance, clearance distance) using the experiment which takes a photograph of foot motion during walking stairs. The results of this thesis are as follows. The slope of a staircase in house is $32.3^{\circ}$$^{\circ}$-$42.1^{\circ}$$^{\circ}$. The riser should be less than 190 mm. The minimum size of tread is 210 mm and proper size is 270 mm.