• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.623-640
• /
• 2015

This paper presents techniques to harvest higher voltage from piezoelectric cantilever energy harvester by structural alteration. Three different energy harvesting structures are considered namely, stepped cantilever beam, stepped cantilever beam with rectangular and trapezoidal cavity. The analytical model of three energy harvesting structures are developed using Euler-Bernoulli beam theory. The thickness, position of the rectangular cavity and the taper angle of the trapezoidal cavity is found to shift the neutral axis away from the surface of the piezoelectric element which in turn increases the generated voltage. The performance of the energy harvesters is evaluated experimentally and is compared with regular piezoelectric cantilever energy harvester. The analytical and experimental investigations reveal that, the proposed energy harvesting structures generate higher output voltage as compared to the regular piezoelectric cantilever energy harvesting structure. This work suggests that through simple structural modifications higher energy can be harvested from the widely reported piezoelectric cantilever energy harvester.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.458-466
• /
• 1993

Natural convection in trapezoidal sections of cavity was numerically investigated using a Finite Volume Method. Temperatures of the upper inclined and lower horizontal walls are constant, with vertical side walls being insulated. When the top wall is hotter than the bottom one, a single cell of stratified flow field is obtained and heat transfer occurs only by conduction. For the colder top wall, bifurcation solutions are obtained for the higher Rayleigh numbers, while unique solutions for lower values. Flow structure is strongly dependent on the configuration and the Rayleigh number.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.35.4-35.4
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2181-2188
• /
• 1992

Two-dimensional natural convection within a circular trapezoidal cavity with parallel cylindrical top and bottom walls at different temperatures and two adiabatic side walls has been solved by finite-difference methods. This study has been conducted to evaluate the effects of aspect ratio and inclination in the natural convection for various Rayleigh numbers. The minimum average Nusselt number occurs at the point of transition from a conductive heat transfer to a convective heat transfer. Numerical results are compared to experimental results with qualitatively good agreement.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.446-458
• /
• 2000

In this study, compressive strengths of three condensable composite resins(ALERT, SureFil, Solitaire), conventional hybrid composite resin(Z-100) and amalgam(HI-Aristaloy 21) according to the 6 types of cavity design(cylinder, trapezoidal, butt-joint, round bevel, long bevel and short bevel) were measured and appearance of fracture surfaces were observed with SEM, thus evaluated clinical applications of condensable composite resins according to the cavity designs. The results were as follows; 1. Compressive strengths according to experimental materials were the highest in SureFil, and Z-100, ALERT, Solitaire, HI-Aristaloy 21 in order. 2. SureFil showed the highest compressive strength(p<0.05). compressive strengths of ALERT and Solitaire were lower than that of Z-100, hybrid composite(p<0.05). 3. Compressive strengths according to specimen design were the highest in trapezoidal shape(p<0.05) and no significant difference was detected between other specimen designs. 4. The appearance of condensable composite resin under SEM was of a diverse configuration according to component of resin matrix, shapes of filler and surface treatments between resin and filler.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.227-232
• /
• 2021

In this paper, the narrow-band characteristic, which is the disadvantage of the existing the PD sensor, was improved by transforming the sensor shape into a trapezoidal shape to improve the characteristics of the dipole-shaped conventional PD(Patial Discharge) sensor. In addition, by applying a cavity structure, which is a structure that can fundamentally block the electromagnetic wave signal from the outside as it is used for an external sensor, it is a partial discharge sensor that takes advantage of the structural advantages of low cost and convenience of installation. As a result of the experiment, it was shown that there is a broadband characteristic of about 70.5%(1.59~3.32GHz) at the center frequency of 2.45GHz, and the broadband characteristic was confirmed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1211-1219
• /
• 1995

An upper bound elemental technique (UBET) program has been developed to analyze forging load, die-cavity filling and effective strain distribution for flash and flashless forgings. The simulation for flash and flashless forgings are applied axisy mmetric and plane-strain closed-die forging with rib-web type cavity. Inverse triangular and inverse trapezoidal elements are used to analyze flashless forging. The analysis is described for merit of flashless precision forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load and the flow pattern are in good agreement with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.837-841
• /
• 1997

An upper bound elemental technique(UBET) program has been developed to analyze forging load, die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements, are used to analyze flashless forging. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.379-388
• /
• 1999

Au upper bound elemental technique(UBET) program has been developed to analyze forging load die-cavity filling and optimum kinematically admissible velocity fields for flashless forging. The simulation for flashless forgings are applied plane-strain and axisymmetric closed-die forging with rib-web type cavity. The kinematically admissible velocity fields for inverse triangular and inverse trapezoidal elements are used to analyze flashless forging,. Experiments have been carried out with pure plasticine billets at room temperature. Theoretical predictions of the forging load in plane-strain and axisymmetric forging are in good agreement with experimental results.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1098-1102
• /
• 2008

To increase the ink transfer rate in the micro-gravure-offset printing, the liquid transfer process between two separating plates is investigated. During the liquid transfer process, in which one plate is fixed and the other one moves vertically, a sessile droplet is separated into two droplets. The volume ratio of the two droplets depends on the contact angles of the two plates. In a numerical study of the ink transfer processes, liquid transfer between two parallel separating plates and between a trapezoidal cavity and an upward moving plate are simulated, as models of the printing of ink from the offset pad onto the substrate and the picking up of ink from the gravure plate by the offset pad, respectively. Also, in experimental study, to obtain various surface contact angles, chemical treatment, plasma treatment, and electrowetting- on-dielectric (EWOD) surface are considered. The transfer rate between two plates is calculated by analyzing the droplet images. From the results, the optimal surface contact angles of the units of the micro-gravure-offset printing can be characterized.