The aim of the present study is to investigate the buckling strength of plates and stiffened panels with opening under transverse thrust and shear actions. It is observed that the existing design formulation for critical-buckling strength of plates are not valid for perforated plates, because the current design formulation trends can significantly overestimate or underestimate the load-carrying capacity of plates when plates have large opening and/or are thick. A series of eigen value and elastic.plastic large deflection finite element analyses are carried out with varying the aspect ratio of plate, the opening size and location on plate until and after the ultimate strength is reached. Based on the results obtained from the present study, closed-form design formulations for the elastic buckling strength of plates and stiffened panels with opening are derived. The derived design formulations are considered plasticity correction of the material and verified by experimental tests and results of nonlinear finite element computations.
This study is to investigate the stiffness degradation of a composite laminated panel including transverse matrix cracks subjected to bending and twisting moments. Micromechanics theory on the composite material is derived by introducing crack density. Iterative numerical scheme is developed to calculate the degraded composite stiffness which has nonlinear relation due to the crack density. The finite element method is used for structural analysis of the composite panel. Structural responses of the composite panel are examined for various laminated angles and crack density under the bending and twisting moments. Also, the effect of crack opening and closing is considered in the examination. It is realized that the matrix cracks may cause severe stiffness reduction and should be considered in the composite laminated panel.
눈에 이물감, 결막 자극 증상, 소양감 등을 호소하며 서울 지역 안과의원을 내원한 2명의 환자로부터 백색 실 모양의 선충 자충 4마리, 웅충 1마리 및 유충 여러 마리를 얻었다. 충체들을 통상적인 방법으로 처리하여 주사 전자현미경으로 표피 미세구조를 관찰하였다. 웅충의 경우, 체장은 11.00mm, 체폭은 0.18mm, 교미침의 길이는 0.70mm, 식도의 길이는 0.35mm이었다. 자충의 경우 체장은 13.50∼18.00mm, 체폭은 0.20∼0.30mm, 앞 끝에서 vaginal opening까지 0.27mm, 식도 의 길이는 0.41∼0.80mm, 뒤 끝에서 항문까지는 0.062mm이었다. 특징적으로 체표에 가로 주름이 있었는데 전단에서는 주름의 간격이 좁고 몸통 부위에서 그 수는 점차적으로 감소하며 표피가 일어나 나풀거리는 형태를 나타내는데 주름의 수는 단위 mm당 250∼650개의 범위이었다. 위 측정 결과를 통해 본 충을 동양안충(Thelazia callipaeda)으로 동정하였다. 본 충의 전체 모양은 구부와 미부에서 가늘고 몸통 중앙부위는 점점 굵어지는 형태였고 웅충의 경우 미부가 꼬여 있었다. 자충에서는 구부에 6각형 구조로 배열된 6개의 끈 모양의 각질 구조와 그 측면으로 화학적 자극 수용체인 amphid, 몸통 부위에 옆줄과 vaginal opening, 미부에서 또다른 자극 수용체인 1쌍의 phasmid와 anus의 미세구조를 관찰할 수 있었다. 웅충에서는 두부에 끈 모양의 각질 구조 이외에 1쌍의 papillae와 미부에서는 우벼내어진 형태의 구조물을 확인하였으며 교미침과 caudal papillae는 웅충이 1마리이고 그 말단이 꼬여 있어 확인이 어려웠다. 자충의 자궁에서 얻은 유충은 얇은 막에 싸여 있었고 이 막을 벗어야만 특징적인 가로 주름을 볼 수 있었다. 본 연구의 Thelazia callipaeda는 우리 나라에서 보고된 것 중 18번 및 19번째 인체 감염의 예이다.
Cor triatriatum is a rare congenital malformation of the heart, in which a septum stretches in a transverse or oblique plane through the left atrium, thus separating it into two compartments. The upper one connects with the pulmonary veins, and the lower one connects with the left ventricle. Due to the rarity of, and great difficulty in-diagnosing, cor trlatrlatum, data On the surgery of this disease are of necessity very limited and so accurate pre-operative diagnosis was very difficult to make. `We experienced a case of the cyanotic congenital heart disease which was diagnosed as a large atrlal septal defect with streaming venous blood from inferior vena cava to left atrium through atrial septal defect in August, 1982. We found that there were transverse septum in the left atrium through atrlal septal defect, the pulmonary venous drainage were located in the upper chamber of the left atrium, and the lower chamber was connected with the left atrial appendage, mitral valve and `left ventricle. But our case had not any opening in this transverse septum and the right atrium was connected with the upper chamber of the left atrium through the upper part of the atrlal septal defect, and was communicated with the lower chamber of the left atrium through the lower part of the atrlal septal defect. We excised the transverse septum and repair this atrial septal defect with Woven Dacron patch accompanying with the drainage of coronary sinus to right atrium. The post-operative course was not eventful and he was discharged with good result on the post-operative 8th day, and has been in good .condition up to now for longer than 10 months.
목재(木材)파아티클과 성질(性質)이 전혀 다른 철선(鐵線)을 물리적(物理的)으로 결합(結合)시킴으로써 목재(木材)와 철재(鐵材)의 재료적(材料的) 특성(特性)을 서로 보완(補完)하여 목재(木材)파아티클과 철선(鐵線)의 새로운 복합체(複合體)인 목질(木質)-철선(鐵線)보오드를 제조(製造)하고 그 특성(特性)을 구명(究明)하여 기초자료(基礎資料)를 얻고자 하였다. 메란티 합판제조폐재(合板製造廢材)을 이용(利用)한 팔만칩을 12mesh를 통과하고 20mesh체에 남는 큰 파아티클과 20mesh을 통과하고 60mesh체에 남는 작은 파아티클로 구분하여 요소수지를 분무한 다음, 굵기 1mm인 철선(鐵線)을 나비방향과 길이방향으로 1, 2 및 3층(層)으로 배열하여 성형(成型)하고 시험용(試驗用) 복합(複合) 파아티클 보오드를 제조하였다. 1층(層) 철선구성(鐵線構成)보오드의 경우에는 철선간(鐵線間)의 배치간격(配置間隔)을 나비방향과 길이방향(方向)으로 각기 0.5cm, 1cm, 1.5cm, 2cm 및 2.5cm 등(等) 5가지로 하여 24가지의 철선구성방법(鐵線構成方法)으로 하였으며, 2층(層) 철선구성(鐵線構成 )보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하였고 철선구성방법(鐵線構成方法)을 3가지로 하였으며, 3층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)을 1cm로 하고 철선구성방법(鐵線構成方法)을 11가지로 하여 제조(製造)한 보오드는 대조(對照)보오드를 포함(包含)하여 312개였다. 보오드를 성형(成型)한 열압온도(熱壓溫度) 160$^{\circ}C$, 악력(壓力) 35kgf/$cm^2$, 열압시간(熱壓時間) 9분(分)으로 하여 보오드를 제조(製造)하고 이 목질(木質) 철선복합(鐵線複合)보도드의 물리적(物理的) 및 기계적(機械的) 성질(性質)을 측정(測定)분석(分析)한 바 다음과 같은 결과(結果)를 얻었다. 1. 큰 파아티클과 작은 파아티클로 제조(製造)한 보오드에서 철선구성층수(鐵線構成層數) 및 구성철선(構成鐵線)의 수(數)가 많은 보오드일수록 그 비중(比重)은 컸었다. 2. 큰 파아티클로 제조(製造)한 보오드는 철선구성(鐵線構成)으로 인하여 두께팽창율(膨脹率)의 감소(減少)가 뚜렷하였으며 특히 철선구성층수(鐵線構成層數)가 많을수록 이 팽창율(膨脹率)은 더 개선되었다. 3. 큰 파아티클 및 작은 파아티클로 제조(製造)한 보오드 공(共)히 철선구성층수(鐵線構成層數)가 증가(增加)함에 따라 철선(鐵線)의 강도적(强度的) 특성(特性)이 파아티클 휨강도(强度) 성질(性質)을 보강(補强)하여 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 개선(改善)되었으며, 2층(層) 및 3층(層) 철선구성(鐵線構成)보오드의 경우 보오드의 하층(下層)의 철선구성방향(鐵線構成方向)이 보오드의 길이방향(方向)과 일치(一致)하는 보오드가 특(特)히 큰 휨강도(强度) 향상(向上)을 보여 인장라미네이션을 얻었다. 4. 1층(層) 철선구성(鐵線構成)보오드는 철선구성간격(鐵線構成間隔)에 따른 개구면적(開口面積)과 파아티클의 크기에 따라 파괴계수(破壞係數), 탄성계수(彈性係數), 휨 극한하중(極限荷重) 일량(量) 등(等)이 다르게 나타났으나, 큰 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고, 나비 방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2cm이면서 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1.5~2.5cm인 보오드가 높은 값을 나타냈고 작은 파아티클로 제조(製造)한 보오드의 파괴계수(破壞係數)는 개구면적(開口面積)이 0.5~1.5$cm^2$ 및 3.75~6.25$cm^2$이고 나비 방향(方向)의 철선간격(鐵線間隔)이 0.5cm이거나 2.5cm인 보오드가 높은 값을 나타냈다. 5. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 1.5~3$cm^2$이고 나비방향(方向) 및 길이방향(方向)의 철선구성간격(鐵線構成間隔)이 1~2.5cm에서 큰 값을 나타냈으며, 한편 작은 파아티클로 제조(製造)한 보오드의 탄성계수(彈性係數)는 개구면적(開口面積)이 0.75~1.25$cm^2$ 민 3~6.25$cm^2$이고, 나비방향(方向)의 철선구성간격(鐵線構成間隔)이 0.5 또는 2.5cm에서 큰 값을 나타내었다. 6. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 휨 극한하중(極限荷重) 일량(量)은 개구면적(開口面積)이 1~3$cm^2$인 보오드가 큰 값을 보였고, 작은 파아티클로 제조(製造)한 보오드의 경우의 그것은 철선(鐵線)의 개구면적(開口面積)이 좁은 것이 크게 나타났다. 7. 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 큰 파아티클로 제조(製造)한 3층(層) 및 2층(層) 철선구성(鐵線構成)보오드에서 대부분(大部分) 대조(對照)보오드보다 큰 값을 보였으나 작은 파아티클로 제조(製造)한 보오드에서는 뚜렷한 경향이 없었다. 큰 파아티클로 제조(製造)한 1층(層) 철선구성(鐵線構成)보오드의 박리저항(剝離抵抗) 및 나사못보지력(保持力)은 전체적으로 비슷한 수준(水準)을 보였고 작은 파아티클로 제조한 보오드에서는 개구면적(開口面積)이 증가(增加)함에 따라 박리저항(剝離抵抗)은 증가(增加)하고 나사못보지력(保持力)은 감소(減少)하는 현상(現象)을 보였다.
The truss analogy for the analysis of beam-columns subjected of shear and flexure is limited by the contribution of transverse and longitudinal steel and diagonal concrete compression struts. However, it should be noted that even though the behavior of reinforced concrete beam-columns after cracking can be modeled with the truss analogy, they are not perfect trusses but still structural elements with a measure of continuity provided by a diagonal tension field. The mere notion of compression field denotes that there should be some tension field coexisting perpendicularly to it. The compression field is assumed to form parallel to the crack plane that forms under combined flexure and shear. Therefore, the concrete tension field may be defined as a mechanism existing across the crack and resisting crack opening. In this paper, the effect of concrete tensile properties on the shear strength and stiffness of reinforced concrete beam-columns is discussed using the Gauss two-point truss model. The theoretical predictions are validated against the experimental observations. Although the agreement is not perfect, the comparison shows the correct trend in degradation as the inelasticity increases.
Modified couple stress formulation and first order shear deformation theory are used for magneto-electro-elastic bending analysis of three-layered curved size-dependent beam subjected to mechanical, magnetic and electrical loads. The governing equations are derived using a displacement field including radial and transverse displacements of middle surface and a rotation component. Size dependency is accounted based on modified couple stress theory by employing a small scale parameter. The numerical results are presented to study the influence of small scale parameter, initial electric and magnetic potentials and opening angle on the magneto-electro-elastic bending results of curved micro beam.
Cor triatriatum is a rare congenital malformation of the heart in which a septum stretches in a transverse plane through the left atrium, thus creates two left atrial subchambers. The upper one connects with the pulmonary veins, and the lower connects with the left ventricles. Due to the rarity of, and difficulty in diagnosing car triatriatum, data on the surgery of the disease are of necessity and very limited. A case of cor triatriatum combined with atrial septal defect and persistent left superior vena cava was experienced in November, 1984 in Chonnam University Medical School. There was a transverse septum in the left atrium below atrial septal defect, all pulmonary veins were drained into the upper chamber of the left atrium which connected with the right atrium via atrial septal defect and the lower chamber via an oval opening[8mm] in the abnormal septum and the lower chamber was connected with the left atrial appendage, and the left ventricle via mitral valve. There was persistent left superior vena cava drained to left atrium and coronary sinus. The abnormal transverse septum within the left atrium was completely excised and the atrial septal defect was repaired with Woven Dacron patch. The post-operative course was not eventful and the patient was discharged to home with good result on the 15th postoperative day, and has been in good condition upto now.
One-dimensional rod theory is very effective as a simplified analytical approach to large scale or complicated structures such as high-rise buildings, in preliminary design stages. It replaces an original structure by a one-dimensional rod which has an equivalent stiffness in terms of global properties. The mechanical behavior of structures composed of distinct constituents of different stiffness such as coupled walls with opening is significantly governed by the local variation of stiffness. Furthermore, in structures with setback the distribution of the longitudinal stress behaves remarkable nonlinear behavior in the transverse-wise. So, the author proposed the two-dimensional rod theory as an extended version of the rod theory which accounts for the two-dimensional local variation of structural stiffness; viz, variation in the transverse direction as well as longitudinal stiffness distribution. This paper proposes how to deal with the two-dimensional rod theory for structures with setback. Validity of the proposed theory is confirmed by comparison with numerical results of computational tools in the cases of static, free vibration and forced vibration problems for various structures. The transverse-wise nonlinear distribution of the longitudinal stress due to the existence of setback is clarified to originate from the long distance from setback.
The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.