• Korean Journal of Construction Engineering and Management
• /
• v.21 no.6
• /
• pp.84-94
• /
• 2020

Modular architecture is very important not only in the design phase but also in the construction planning phase because it affects construction methods and module sizes depending on transport equipment. There are economic risks as well as quality, as there may be defects such as internal interiors or elimination of deadlines during transportation, and structural torsion caused by rainfall and shock. However, there is a lack of objective criteria or data to refer to in determining transport equipment that has a material effect on transport. Accordingly, there is no decision model to determine the optimum transportation equipment for each construction site. Therefore, it is necessary to develop a decision support model that can be compared to the review of transport equipment selection factors. The purpose of this study is to propose the transport equipment impact factors and decision support models for systematic review and objective decision making of each construction plan in the construction of small and medium-sized modulators. The decision model proposed in this study can be used as basic data for transport studies, ensuring objectivity and transparency in the equipment selection process.

• Journal of Internet Computing and Services
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2013

WAVE(Wireless Access for Vehicular Environment) is new concepts and Vehicles communications technology using for ITS(Intelligent Transportation Systems) service by IEEE standard 802.11p. Also it increases the efficiency and safety of the traffic on the road. However, the efficiency of Scrambler bit computational algorithms of OFDM modulation in WAVE systems will fall as it is not able to process in parallel in terms of hardware and software. This paper proposes an algorithm to configure 64-bits matrix table in scambler bit computation as well as an algorithm to compute 64-bits matrix table and input data in parallel. The proposed algorithm on this thesis is executed using 64-bits matrix table. In the result, the processing speed for 1 and 1000 times is improved about 40.08% ~ 40.27% and processing rate per sec is performed more than 468.35 compared to bit operation scramble. And processing speed for 1 and 1000 times is improved about 7.53% ~ 7.84% and processing rate per sec is performed more than 91.44 compared to 32-bits operation scramble. Therefore, if the 64 bit-CPU is used for 64-bits executable scramble algorithm, it is improved more than 40% compare to 32-bits scrambler.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2007

Seoul's transportation system was changed drastically starting the first of June in two thousand. This policy includes integrated distance-based fare system and public transportation card system called smart card. Especially, as public transportation card data contains individual travel, transfer and using modes information it is possible to catch the characteristics of path-based individuals and mass transit. Thus, public transportation card data can contribute to evaluate the mass transit service in integrated public transportation networks. In addition, public transportation card data are able to help to convert previous researches and analyses with link-based trip assignment models to path-based mass transit service analysis. In this study, an algorithm being suitable for path-based trip assignment models is suggested and proposed algorithm can also contribute to make full use of public transportation card data. For this, column generation algorithm hewn to draw the stable solution is adopted. This paper uses the methodology that is to take local approximate equilibrium from partial network and expand local approximate equilibrium to global equilibrium.

• The KIPS Transactions:PartD
• /
• v.19D no.2
• /
• pp.127-132
• /
• 2012

In the Seoul metropolitan bus network, it may be necessary for a bus passenger to pick up a parcel, which has been purchased through e-commerce, at his or her convenient bus stop on the way to home or office. The flow-capturing location-allocation model can be applied to select pickup points for such bus stops so that they maximize the captured passenger flows, where each passenger flow represents an origin-destination (O-D) pair of a passenger trip. In this paper, we propose a fast heuristic algorithm to select pickup points using a large O-D matrix, which has been extracted from five million transportation card transactions. The experimental results demonstrate the bus stops chosen as pickup points in terms of passenger flow and capture ratio, and illustrate the spatial distribution of the top 20 pickup points on a map.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.653-658
• /
• 2008

The demand of international intermodal transportation is continuously increasing in accordance with a changing environment on international logistics, Under this circumstance, the Sea&Air intermodal transportation, combined by sea-based and air-based transport, has a potential growth in the future. After analyzing routes for Origin/Destination and implementing portfolio analysis, finally, this research aims to propose alternatives to create additional customers(or cargoes) for the Sea&Air transport. As a result of the analyses, China appeared to be a major customer of the Sea&Air transport in Korea because some of the Chinese areas - i.e. Qingdao, Shanghai, Weihai and Yantai - account for 88.1% of the total throughput. In general, this indicates that it would be more efficient to establish specific strategies targeting those major areas. Excluding the four areas, most of the other area, have much less demands and are relatively unstable. The demands, growth rates and market shares especially in Vladivostok, Dandong and Tianjinxingang are on the decrease, and therefore, stable strategies seems to be appropriate than aggressive strategies for these areas.

• Composites Research
• /
• v.28 no.6
• /
• pp.389-394
• /
• 2015

The sound absorption coefficient and sound transmission loss of graphite intercalation compound (GIC) included epoxy composites were investigated. Epoxy resin was infused into the expanded GIC and the impedance tube method was employed to measure the sound absorption coefficient and sound transmission loss. Scanning electron microscopy photographs showed uniform distribution of the GIC in the epoxy matrix. The surface density of epoxy/GIC (20 wt%) composites decreased about 56% compared to that of pure epoxy. The sound absorption coefficient of composites increased about 3 times at the frequency range of 500~1000 Hz compared to the pure epoxy. The sound transmission loss of composites decreased with increasing the GIC content and it is attributed to the increase of pores in the composites.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.43-62
• /
• 2004

Conventionally the estimation method of the origin-destination Matrix has been developed by implementing the expansion of sampled data obtained from roadside interview and household travel survey. In the survey process, the bigger the sample size is, the higher the level of limitation, due to taking time for an error test for a cost and a time. Estimating the O-D matrix from observed traffic count data has been applied as methods of over-coming this limitation, and a gradient model is known as one of the most popular techniques. However, in case of the gradient model, although it may be capable of minimizing the error between the observed and estimated traffic volumes, a prior O-D matrix structure cannot maintained exactly. That is to say, unwanted changes may be occurred. For this reason, this study adopts a conjugate gradient algorithm to take into account two factors: estimation of the O-D matrix from the conjugate gradient algorithm while reflecting the prior O-D matrix structure maintained. This development of the O-D matrix estimation model is to minimize the error between observed and estimated traffic volumes. This study validates the model using the simple network, and then applies it to a large scale network. There are several findings through the tests. First, as the consequence of consistency, it is apparent that the upper level of this model plays a key role by the internal relationship with lower level. Secondly, as the respect of estimation precision, the estimation error is lied within the tolerance interval. Furthermore, the structure of the estimated O-D matrix has not changed too much, and even still has conserved some attributes.

• Journal of Korean Society of Transportation
• /
• v.19 no.2
• /
• pp.61-72
• /
• 2001

기존의 링크교통량으로부터 OD추정모형은 기존 OD에 대한 추정의 종속성이 커, 기존 OD나 관측링크교통량의 오차에 따라 추정결과가 일관적이지 않은 문제점을 가지고 있다. 또한 관측링크교통량의 정확도가 중요함에도 불구하고 차종구분 없이 링크교통량을 이용하여 정보의 손실을 초래하였고 결과적으로 OD 추정력을 저하시켰다. 그렇지만 다차종 링크교통량으로부터 다차종 OD를 구하는 연구는 거의 없었으며, 그 추정결과가 단일차종에 대한 추정결과와 어떻게 다른지에 대한 연구도 전무하였다. 본 연구의 목적은 기존의 OD 추정모형이 기존 OD에 대해 종속성을 가지며 차종구분 없이 모형을 구성함으로써 추정력의 저하를 초래하였음을 밝히고, 이에 대한 대안으로 종속성 문제를 완화하고 차종구분을 통해 OD 추정모형의 추정력을 증진시키자 하는 것이다. 이를 위해 유전알고리즘을 이용한 다차종 OD행렬 추정모형(GAMUC)을 구축하고, 이를 기존의 바이레벨 모형의 IEA 알고리즘 및 다차종으로 확장한 모형(IEAMUC)과 게임이론측면에서 검토하였으며, 사례네트워크에 대해 각 기법을 비교하였다. 본 연구는 유전알고리즘을 이용한 OD 추정기법을 축도로에 적용한 임용택 등(2000)과 이를 네트워크로 확장한 백승걸 등(2000)의 연구를 다차종으로 확장한 것이다. 사례분석 결과 기존 OD의 오차변화나 관측링크교통량의 오차변화 등에 있어 GAMUC가 IEA나 IEAMUC보다 추정력이 양호하여, 실제 OD를 알 수 없는 도시부 네트워크에서 GAMUC 모형의 적용력이 우수하였다. 또한 차종을 구분하지 않은 기존 모형은 실제 OD와는 전혀 다른 OD 구조를 도출할 수 있음을 보였으며, 단일 차종을 여러 차종으로 구분하여 OD를 추정하는 것이 더 양호한 추정력을 확보하는 것으로 나타났다.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.99-108
• /
• 2001

A framework of using and integrating GIS and OR tools for determining the best site selection has been provided. In this research, we demonstrated that both the P-Median heuristic method and MIP method can be successfully applied to the optimum site selection problem of oil tank location selection. Furthermore, the results identified by both approaches are identical. To accomplish this, both GIS road and maritime networks have been constructed and combined to calculated the minimum distance matrix, which is required by both approaches. After the application to the Korean peninsula, the facility locations chosen are Kunsan, Yosu, Busan, and Okgye for each district. As has been shown, the power of GIS and both algorithm have been demonstrated throughout the research and further similar research can also be conducted using the power of GIS and Operations Research tools.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.399-408
• /
• 2018

Cable supported structures have been widely used in civil engineering. Cable tension estimation has great importance in cable supported structures' analysis, ranging from design to construction and from inspection to maintenance. Even though the Bernoulli-Euler beam element is commonly used in the traditional finite element method for calculation of frequency and cable tension estimation, many elements must be meshed to achieve accurate results, leading to expensive computation. To improve the accuracy and efficiency, a dynamic finite element method for estimation of cable tension is proposed. In this method, following the dynamic stiffness matrix method, frequency-dependent shape functions are adopted to derive the stiffness and mass matrices of an exact beam element that can be used for natural frequency calculation and cable tension estimation. An iterative algorithm is used for the exact beam element to determine both the exact natural frequencies and the cable tension. Illustrative examples show that, compared with the cable tension estimation method using the conventional beam element, the proposed method has a distinct advantage regarding the accuracy and the computational time.