• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.110-123
• /
• 2005

This paper proposes an intelligent method for the optimal load distribution of two cooperating robots(TCRs) using fuzzy logic. The proposed scheme requires the knowledge of the robots' dynamics, which in turn depend upon the characteristics of large flat panel displays(LFPDs) carried by the TCRs. However, the dynamic properties of the LFPD are not known exactly, so that the dynamics of the robots, and hence the required joint torque, must be calculated for nominal set of the LFPD characteristics. The force of the TCRs is an important factor in carrying the LFPD. It is divided into external force and internal force. In general , the effects of the internal force of the TCRs are not considered in performing the load distribution in terms of optimal time, but they are essential in optimal trajectory planning: if they are not taken into consideration, the optimal scheme is no longer fitting. To alleviate this deficiency, we present an algorithm for finding the internal-force factors for the TCRs in terms of optimal time. The effectiveness of the proposed system is demonstrated by computer simulations using two three-joint planner robot manipulators.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.127-134
• /
• 2023

Recently, various input shapers have been introduced to reduce residual vibrations of flexible robots. However, there have been no studies on the design of an input shaper that can suppress residual vibration at an arbitrarily specified duration. In this paper, a novel input shaper called an SD (specified-duration) shaper is proposed for an undamped or underdamped system, which can suppress residual vibration at an arbitrarily given specified duration. If the specified duration is larger than a half period, a positive SD shaper composed of all positive impulses is designed, and if the specified duration is smaller than a half period, a negative SD shaper including a negative impulse is designed. As the specified duration is increased every half period after a half period, the number of impulses of the positive SD shaper is increased one by one, and the robustness of the SD shaper to modeling errors is increased. The performance of the SD shaper is analyzed through simulation studies for an undamped and underdamped second-order systems. The validity of the SD shapers is demonstrated experimentally using an experimental device that can generate container transport motions.

• Design & Manufacturing
• /
• 제18권2호
• /
• pp.35-40
• /
• 2024

Injection molding is a process widely used across various industries for molding plastics, and it is the most commonly applied process in root industries utilizing molds. Among the different types of injection molding, insert injection molding, where busbars are used as inserts, is increasingly being applied in the electric vehicle industry. However, currently, the insert injection molding process is manually performed, with workers placing insert components by hand before injection molding. This results in issues related to productivity, safety, and quality. Additionally, there is a growing demand for automation of such production lines due to hazardous working conditions, economic difficulties in the manufacturing industry, and the decline in the labor force caused by an aging population. This study focuses on the application of an automated system for the insert injection molding process used in electric vehicles. The development of an automated system for the transport and insertion of insert components, as well as the inspection and stacking processes after injection, has resulted in over a 25% improvement in productivity and more than a 27% reduction in defect rates.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.731-733
• /
• 2016

라인 트레이서의 기본적인 목표는 주어진 주행선을 센서로 검출하여 목적 위치까지 정확하고 빠르게 이동하는 것이다. 이를 응용하여 현재 무인 운송 차량, 레이저 절단기, 자율이동 및 주행이 가능한 무인 로봇 등 여러 분야에 활용되고 있고, 응용에 따라 많은 발전의 가능성을 가진 분야로 여러 대학교에서 매년 대회를 개최하고 있다. 하지만, 하드웨어적인 설계와 제어방식에 따라 주행 성능에 많은 차이가 생긴다. 본 논문에서는 라인트레이서의 특성을 향상시키고자 지적 PID를 적용한 제어기를 설계하여 시스템의 특성을 향상시키는 방안을 강구하고자 한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.363-375
• /
• 2013

오늘날 숙련된 굴삭기 운전자의 부족현상은 갈수록 심화되고 있으며, 자원개발 및 새로운 생활공간 창출 등을 목적으로 운전자가 접근하기 어려운 극한환경에서 토공작업의 필요성이 증가함에 따라 전 세계적으로 토공완전자동화를 위한 무인화 굴삭로봇 개발의 노력이 경주되고 있다. 국내에서도 지난 2006년 말부터 국토해양부 건설기술혁신사업의 일환으로 '지능형 굴삭시스템' 연구단을 구성하여 연구를 지속하고 있다. 본 논문에서는 지능형 굴삭시스템의 작업계획생성시스템이 갖추어야 할 세부요소기술 중, 굴착작업의 위치, 범위, 목표, 순차 등 굴삭로봇의 운용단위 작업명령정보를 생성하기 위한 정보화단위를 제공하는 로컬영역설계모듈의 연구개발내용에 대하여 설명한다. 로컬영역의 설계는 굴삭로봇의 제원, 작업메커니즘, 휴리스틱 및 구조적안전성 등 여러 영향요소가 고려되어야 안전하고 효율적인 굴착작업을 보장하는 작업계획을 생성할 수 있다. 따라서 로컬영역의 설계요소를 분석하기 위하여 현장조사를 통한 개념적 설계를 수행하고, 상세설계를 통해 설계변수를 도출하였으며, 휴리스틱 및 구조적 해석요건을 만족하도록 설계내용을 정량화하였다. 마지막으로 로컬영역설계모듈을 개발하기 위한 알고리즘을 구축하고, 개발된 모듈을 검증하였다.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.103-108
• /
• 2019

본 논문에서는 비평형 분자동역학 시뮬레이션 기법을 사용하여 알루미늄 박막과 실리콘 웨이퍼 간 열경계저항을 예측하였다. 실리콘의 끝 단 고온부에 열을 공급하고, 같은 양의 열을 알루미늄 끝 단 저온부에서 제거하여 경계면을 통한 열전달이 일어나도록 하였으며, 실리콘 내부와 알루미늄 내부의 선형 온도 변화를 계산함으로써 경계면에서의 온도 차이에 따른 열저항 값을 구하였다. 300K 온도에서 $5.13{\pm}0.17m^2{\cdot}K/GW$의 결과를 얻었으며, 이는 열유속 조건의 변화와 무관함을 확인하였다. 아울러, 펨토초 레이저 기반의 시간영역 열반사율 기법을 사용하여 열경계저항 값을 실험적으로 구하였으며, 시뮬레이션 결과와 비교 검증하였다. 전자빔 증착기를 사용하여 90nm 두께의 알루미늄 박막을 실리콘(100) 웨이퍼 표면에 증착하였으며, 유한차분법을 이용한 수치해석을 통해 열전도 방정식의 해를 구해 실험결과와 곡선맞춤 함으로써 열경계저항을 정량적으로 평가하고 나노스케일에서의 열전달 현상에 관한 특징을 살펴보았다.