• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1185-1189
• /
• 2007

In this paper, to improve the efficiency of pressurized pneumatic grit conveying for ship block open blasting process. Pressurized pneumatic grit conveying is defined as the transportation of grit(abrasive) in a compressed air flow. Total Pressure loss in flexible hose for pneumatic conveying is sum of pressure losses due to gas and grit and needle type pressure transmitter for measured pressure loss. haracteristics of grit open blasting by pneumatic conveying were studied experimentally. Studies variables were blasting nozzle ID, length and ID of flexible hose, grit flow rate, flow rate and pressure of transport air. It was experimentally proved that optimal open blasting condition and cost effective operation regarding grit blasting, obtaining a high qulity surface preparation(Sa $2^{\frac{1}{2}}$).

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.61-66
• /
• 2020

For simple and repetitive transport tasks in limited spaces such as in factories, it is more efficient to use mobile robots instead of human workers. For this reason, the reliance on mobile robots is increasing due to the increased implementation of smart factories. Currently, the structural design of the Mecanum wheel is required to ensure the stability of the moving robot since it is used for the transport of not only small products but also large products. In this paper, to improve the stability and durability of the Mecanum wheel, ways to improve the structure of the Mecanum wheel are presented. Then, using the Castigliano theorem, the structural stability is reviewed through the deflection on existing and improved structures.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• 한국ITS학회 논문지
• /
• 제13권4호
• /
• pp.57-62
• /
• 2014

최근 들어 DSRC(Dedicated Short Range Communication), WAVE(Wireless Access for Vehicular Environment) 등의 무선 네트워크 기술을 기반으로 고속 이동 중인 차량의 운전자에게 안전 정보를 제공하기 위한 연구개발이 활발히 진행중이다. 본 논문에서는 무선랜 기술을 기반으로 하는 딜레마구간 의사결정 지원 서비스를 위한 로봇카 기반의 개념검증모형시스템의 설계 및 구현에 대하여 소개한다. 제안하는 모델 시스템은 무선랜 인터페이스를 탑재한 임베디드 리눅스기반의 로봇카 및 차량탑재장치 에뮬레이터, 운전자의 동작을 모사하기 위한 안드로이드 기반의 원격조종기, 신호제어기와 신호시스템을 모사하기 위한 노트북 PC, 노변기지국을 모사하기 위한 무선랜 AP(Access Point)로 구성된다.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.35-41
• /
• 2012

This paper proposes a moving object detection algorithm for active camera system that can be applied to mobile robot and intelligent surveillance system. Most of moving object detection algorithms based on a stationary camera system. These algorithms used fixed surveillance system that does not consider the motion of the background or robot tracking system that track pre-learned object. Unlike the stationary camera system, the active camera system has a problem that is difficult to extract the moving object due to the error occurred by the movement of camera. In order to overcome this problem, the motion of the camera was compensated by using SURF and Pseudo Perspective model, and then the moving object is extracted efficiently using stochastic Label Cluster transport model. This method is possible to detect moving object because that minimizes effect of the background movement. Our approach proves robust and effective in terms of moving object detection in active camera system.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.417-424
• /
• 2002

This study was conducted to develop a vehicle, leading or following a worker at a certain distance to assist laborious transporting works in greenhouses. A prototype vehicle was tested in the practical field conditions using a developed control algorithm. Results of this study were summarized as following: 1. The sensing device consisted of infrared sensors was attached to the front of the vehicle and turning following algorithm was developed to make the vehicle turned as it follows a worker simultaneously. 2. The measured average power consumptions were 110W and 89W, equivalent to 5.2-6.4 hrs battery durations, at low speed with and without the maximum payload, respectively. 3. Results of the travel tests showed that the deviations from the center of row spacing were $\pm$100 mm along the ridge and $\pm$85 mm along the hydroponic bed in the greenhouse. Therefore, the worker-following transport vehicle was feasible to travel along the row without collision in the greenhouse.

• 한국ITS학회 논문지
• /
• 제21권3호
• /
• pp.18-29
• /
• 2022

국내외적으로 V2X 통신기술을 접목한 C-ITS 사업 및 자율주행 고도화 실증연구가 활발히 진행되고 있다. 실증 초기 1단계에서는 경고메시지, 차량주행정보, 교통정보 등의 방송서비스에서 점차 실시간성을 요구하는 군집주행, 원격주행, 인식정보공유 등의 고도화된 서비스로 발전하고 있다. 또한, 네트워크 서비스 고도화를 위해 전송속도와 지연시간 등을 개선하기 위한 기술개발이 여러모로 진행되고 있다. 본 논문에서는 3GPP 표준 기반 C-V2X 기술을 바탕으로 안정적인 드로이드 형태의 저속 로봇의 원격주행 서비스 제공을 위해 네트워크 지연시간 측면에서 요구사항을 분석하였다. 원격주행 성능평가를 위해 오퍼레이터를 포함한 시스템 모델링을 통한 시뮬레이션을 수행하였고, 해당 실험 조건에서 90% 이상의 성능 만족을 위해 30ms 이내의 코어 및 액세스 네트워크 지연시간이 요구된다는 것을 알 수 있었다.

• 한국ITS학회 논문지
• /
• 제20권3호
• /
• pp.86-99
• /
• 2021

본 연구는 V2I통신을 이용하여 교차로 등의 사각지대로 인해 발생할 수 있는 충돌 사고를 예방하기 위한 충돌 방지체계를 제안한다. 교차로의 인프라에 위치한 Vision센서와 LiDAR센서가 물체를 인식하고 사고 위험이 있는 차량에게 경고함으로써 사고를 미연에 방지한다. 딥러닝 기반의 YOLOv4를 이용하여 교차로에 진입하는 물체를 인식하고 LiDAR 센서와의 Calibration을 통해 대상 물체와의 맨하탄 거리값을 이용하여 충돌 예상시간과 제동거리에 대한 가중치를 계산하고 안전거리를 확보한다. 차량-인프라간 통신은 ROS통신을 이용하였으며 충돌 경고 외에도 진입 물체의 Class, 거리, 진행속도 등의 다양한 정보를 차량에 전달함으로써 사고를 미연에 방지하고자 하였다.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.230-236
• /
• 2011

In previous researches, the self-stability was studied for the spring-mass model and the two segment leg model. In these researches, it was presented that the spring-mass model has the self-stable region at relatively high speed running and the two segment leg model has the self-stable region at relatively low speed running. If the model was run in the self-stable region, the cost of transport is zero ideally. That is, actually, only the energy loss is needed to compensate for running. This means that the energy efficiency is high, running in the self-stable region. We want to have high energy efficiency at low and high speed running. So, in this paper, we propose the design direction of the three segment leg having the self-stable region at low and high speed running. And we prove the self-stable region of the three segment leg designed by the proposed design direction.

• 자연과학논문집
• /
• 제5권1호
• /
• pp.87-93
• /
• 1992

비구조적인 환경에서 평면패렛을 포크리프트로 로딩하거나 보조필드 재료운송시스템 로보트를 제안한다. 시스템은 패렛의 위치와 방향을 정의하고 패렛의 2개의 구멍의 위치를 결정하기 위해서 결합된 어쿠스틱과 비쥬얼 센싱 데이타를 사용한다. 그 결과 포크리프트를 패렛의 2개의 구멍에 접근하고 운송하기 위해서 패렛을 인게즈한다. 재료운송시스템의 복잡성을 줄이기 위해서 2차원 포라로이드 울트라소닉 센서와 2차원 압티컬 카메라 비쥬얼 센서데이타를 통합하는 시스템을 개발한다. 2개의 다른 소스에서 얻은 데이타는 서로서로 보완하고 재료운송 시스템로보트를 제어하기 위한 효율적인 알고리즘에 사용한다. 2개의 선형스켄닝으로 부터 얻은 레인지 데이타는 least-mean square 방법을 사용하여 패렛의 팬과 틸트각도를 결정하기 위해서 사용한다. 그리고 에지탐지와 Hough 트랜스폼기술을 사용하여 스윙각도와 패렛의 인게이지먼트 위치를 결정하기 위해서 비쥬얼 데이타를 사용한다. 팬과 틸트각도를 결정하기 위해서 발생하는 제안을 논의한다. 개발된 시스템은 하드웨어와 소프트웨어 구현하여 평가하고 실험적인 결과도 나타낸다.