• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.26-38
• /
• 2023

This paper is a study on a transport robot capable of autonomously driving to a destination using a QR code in an indoor environment. The transport robot was designed and manufactured by attaching a lidar sensor so that the robot can maintain a certain distance during movement by detecting the distance between the camera for recognizing the QR code and the left and right walls. For the location information of the delivery robot, the QR code image was enlarged with Lanczos resampling interpolation, then binarized with Otsu Algorithm, and detection and analysis were performed using the Zbar library. The QR code recognition experiment was performed while changing the size of the QR code and the traveling speed of the transport robot while the camera position of the transport robot and the height of the QR code were fixed at 192cm. When the QR code size was 9cm × 9cm The recognition rate was 99.7% and almost 100% when the traveling speed of the transport robot was less than about 0.5m/s. Based on the QR code recognition rate, an experiment was conducted on the case where the destination is only going straight and the destination is going straight and turning in the absence of obstacles for autonomous driving to the destination. When the destination was only going straight, it was possible to reach the destination quickly because there was little need for position correction. However, when the destination included a turn, the time to arrive at the destination was relatively delayed due to the need for position correction. As a result of the experiment, it was found that the delivery robot arrived at the destination relatively accurately, although a slight positional error occurred while driving, and the applicability of the QR code-based destination self-driving delivery robot was confirmed.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.31-37
• /
• 2011

Construction automation is yet to be improved since construction site still faces a lot of high risks and difficulties. This research focuses on applying robotic beam assembly system in place of construction workers. This system consists of CF (Construction Factory) structure to provide adequate working environment to robot automation. The CF structure not only gives automation environment for a robot but also houses the equipments to protect from outside effects. The robotic beam assembly system also consists of robotic bolting system and robot transport mechanism. It utilizes various tools to insert and join the bolts and nuts. Visual servoing helps precise robot motion by sensing bolt hole and tail of the bolt. ITA system helps non skilled workers to easily perform the assembly work with the robot system. The robot transport mechanism includes sliding rail and cross-wired lift. It carries the robot to a desired position for assembly work.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1357-1365
• /
• 2002

A robot hand is used to transport the glass substrate in TFT-LCD manufacturing process. Carbon/epoxy composite is one of the best materials for this kind of robot hand application, due to their lightweight, high stiffness, and good damping characteristics. Major requirement of the robot hand is given as allowable deflection under weight loading of glass substrate and robot hand itself. In this thesis, a carbon/epoxy robot hand was analyzed using finite element method and beam theory to determine the deflection of the hand under the loading that is equivalent to actual weight. Because natural frequency is one of the major interests in robot hand design for TFT-LCD manufacturing process, modal analysis is also conducted using finite element method and beam theory. A robot hand was manufactured, and actual deflection and natural frequency were measured to verify the analysis results and compliance to requirement. The test results showed good agreement with analysis results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1074-1081
• /
• 2010

Today, the research related to the robot is achieved in various part. With the high interest in means of transport, various researches about autonomous mobile robot and next generation transport is continuing. The unicycle robot among these needs much control technique like balance control model and driving model. For autonomous driving of this unicycle robot, from the basic balance control to direction switching control and velocity control are needed. But the environment elements like a gradient and frictional force or unbalanced elements from the structural feature. The unicycle needs the real time balance control so more complex, harder to control. And when functional addition is made, the problem that fall entire reaction velocity or accuracy would be happen. This paper introduces entire dynamics modeling of the unicycle robot and reduced model. And propose the new balance control algorithm using fuzzy controller. Also the evaluation about performance would be made through the test.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.27-36
• /
• 2009

PSTN (public switched telephone network) provides voice communication service, whereas IP network provides data oriented service, and we can use IP network for multimedia transport service (e.g. voice over IP service) with economic price. In this paper, we propose RoIP (robot on IP) service scenario, signaling call flow, and implementation to provide home automation and monitoring service for remote site users. In our scheme, we used a extended SIP (session initiation protocol) for signaling protocol between remote site users and home robots. For our bearer transport control, we implemented H.263 video codec over RTP (real-time transport protocol) and additionally DTMF (dual tone multi-frequency) transport for robot actuator control. We implemented our scheme on home robots and experimented with KTF operator network, and it shows good communication quality (average MOS = 9.15) and flexible robot controls.

• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.76-82
• /
• 2012

In this study, we aim to develop energy efficient walking and running robot with compliant leg. So, we propose the energy efficient locomotion control method. And, we experiment the proposed control method applying to the experimental robot with compliant leg. From the experiment, we look at whether the proposed control method can the robot walk and run energy efficiently.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.120-125
• /
• 2010

This paper proposes an intelligent PID/Fuzzy control system for two humanoid robots to transport objects stably. When a robot transports an object while walking, a whole body system of a robot may not be stable due to vibration or external factors from a different departure speed error and a body movement of walking robots. Therefore, it is necessary to measure the horizontal and vertical locations and speeds of object, then calibrate the difference of departure speed between robots with PID/Fuzzy control. The results of simulation with two robots indicated that a proposed controller makes robots to transport an object stably.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.130-133
• /
• 2003

The robot has recently emerged as a factor in the daily lives of humans, taking the form of a mechanical pet or similar source of entertainment. A robot system that is designed to co-exist with humans, i.e., a coexistence-type robot system, is important to be "it exists in various environments with the person, and robot system by which the interaction of a physical, informational emotion with the person etc. was valued". When studying the impact of intimacy in the human/robot relationship, we have to examine the problems that can arise as a result of physical intimacy(coordination on safety in the hardware side and a soft side). Furthermore, We should also consider the informational aspects of intimacy (recognition technology, and information transport and sharing). This paper reports the interim results of the research of a system configuration that enhances the physical intimacy relationship in the symbiosis of the human and the robot.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.86-91
• /
• 2018

This paper presents about design efforts of a human-sized quadruped robot leg for high energy efficiency, and verifications. One of the representative index of the energy efficiency is the Cost of Transport (COT), but increased in the energy or work done is not calculated in COT. In this reason, the input to the output energy efficiency should be also considered as a very important term. By designing the robot with customized motor housing, small rotational inertia, and low gear ratio to reduce friction, high energy efficiency was achieved. Squatting motion of one leg was performed and simulation results were compared to the experimental results for validation. The developed 50 kg robot can lift the weight up to 200 kg, and during squatting, it showed high energy efficiency. The robot showed 71% input to output energy efficiency in positive work. Peak current during squatting only appears to be 0.3 A.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.167-174
• /
• 2018

Presently, the exploration of an unknown environment is an important task for the development of mobile robots and mobile robots are navigated by means of a number of methods, using navigating systems such as the sonar-sensing system or the visual-sensing system. To fully utilize the strengths of both the sonar and visual sensing systems, In mobile robotics, multi-sensor data fusion(MSDF) became useful method for navigation and collision avoiding. Moreover, their applicability for map building and navigation has exploited in recent years. In this paper, as the preliminary step for developing a multi-purpose autonomous carrier mobile robot to transport trolleys or heavy goods and serve as robotic nursing assistant in hospital wards. The aim of this paper is to present the use of multi-sensor data fusion such as ultrasonic sensor, IR sensor for mobile robot to navigate, and presents an experimental mobile robot designed to operate autonomously within indoor environments. Simulation results with a mobile robot will demonstrate the effectiveness of the discussed methods.