• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.237-242
• /
• 1993

In the cluster tool, it is necessary to precisely control the vacuum pressure for the wafer transportation between transport module and cassette or process with the range of 10 $^{-4}$ to 5*10 $^{-5}$ torr. So we have designed the pressure control system for the transport module of the cluster tool and have evaluated its performance. Digital PID is utilized with the weighted sum of both three previous errors and one current error. The feedback signal is put into the nitrgen mass flow controller using the transport module controller. This pressure control system can prevent the transport module from the particle generation and backstreaming of hazardous process gases of the process chamber.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.355-358
• /
• 2002

In this paper, we propose RTP(Real-Time Transport Protocol) based image transport system to transport still images in real-time after JPEG2000 compression, which is still image compression standard for next generation. To add RTP packet on UDP packet, the image transport system inserts packetizer and depacketizer process into transmitter and receiver of RTP data, respectively. We apply the proposed system to several image and compare the transport time to TCP-based method.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.269-279
• /
• 1997

The errors associated with incorrect sampling and transport of radioactive aerosol from radwaste thermal process off-gas are analyzed and the conditions of representative sampling and correct transport of radioactive aerosol for off-gas system evaluation are discussed. An estimation method of sampling errors for individual radionuclides is proposed and applied to simulated vitrification melter aerosols. Prediction methods for particle deposition in sample transport tube under laminar as well as turbulent flow conditions are also described by example calculations with simulated incinerator off-gas From the results of example calculations and plots, instrumental and operational conditions of radioactive aerosol sampling system with minimized errors and correction methods for nonideal sampling and transport are recommended.

• Toxicological Research
• /
• 제7권2호
• /
• pp.173-181
• /
• 1991

Membrane transport of brazilin was investigated i primary cultured rat hepatocytes. Brazilin was transported into hepatocytes very slowly and reached plateau at about 60 minutes. Saturation of transport process was not observed and the transport was not affected by ouabain, metabolic inhibitors, and its structural analog. The amount of brazilin transported into hepatocytes was decreased when the environmental temperature was decreased. These results suggest that brazilin might be transported into hepatocytes by simple diffusional process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.64.6-64
• /
• 2002

This paper presents a procedure of implementing a robust controller for a paper-making plant in DCSs. A paper-making process generally has triple problems to automatically tune its output qualities : Long transport delays which are not able to be simply linearized. The transfer matrix of the process is not square. And every plant model has some uncertainty in low and middle frequency region. To tackle these problems, a multi-input / multi-output (MIMO) plant model having some uncertainty was derived by considering some physical and mechanical principles of the process. Then a MIMO robust \ulcornercontroller is designed and implemented in a real DCS as function block type. Som...

• Water Engineering Research
• /
• 제3권2호
• /
• pp.75-84
• /
• 2002

An Euler-Lagrange two-phase flow model is presented fur simulation sheet-flow transport under wave and current. The flow is computed by solving the Reynolds Averaged Navier-Stokes equation in conjunction with the k-$\varepsilon$ turbulence model for turbulence closure. The sediment transport is introduced as a motion of granular media under the action of unsteady flow from the Lagragian point of view. In other word, motion of every single particle is numerically traced with Movable Bed Simulator (MBS) code based on the Distinct Element Method (DEM), in which the frequent interparticle collision of the moving particles during the sheet-flow transport is sophisticatedly taken into account. The particle diameter effect on time-dependent developing process of sheet-flow transport is investigated, by using three different diameter sizes of sediment. The influence of an imposed current on oscillatory sheet-flow transport is also investigated. It is concluded that the sediment transport rate increases due to the relaxation process related to the time-lag between flow velocity and sediment motion.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.274-281
• /
• 2012

This paper proposed a control simulation method for design and verification of the transport system in an automobile assembly line based on digital manufacturing system. The design of the transport system involves two major activities: mechanical design (device specification) and electrical design (device behavior and system control). Conventionally, the simulation and emulation system of the transport system focuses on the abstract level, which mainly deals with design verification, alternative comparison, and system diagnosis. Although it can provide overall system visibility in monitoring how well it works in the process and view, its simulation models are not sufficiently realistic to be used for a detailed design or for implementation purposes. In this paper, a digital simulation model for a transport system in an automotive assembly line is constructed by adapting a digital manufacturing methodology. We use the concept of the "Virtual Probe", which transport a carrier instead of the belt of the conveyor. In conclusion, the proposed method is valuable in the process of test run in the shop floor. This method would reduce the time and effort for validating the manufacturing system and improve the productivity and integrity of the control program.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.241-242
• /
• 2015

According to globalization of world economy on distribution and sales, logistics and transportation parts are play important role. Especially, it important to know and study how to choose right transport route and which is the key factor of route choice model in multimodal transport system. Thus this study aims to consider 4 main factors: cost, delivery time, freight, and logistics service factors additionally dividing into 13 sub factors and object is forwarders between Mongolia and Korean freight transport. The survey is based on AHP through interview with company officials. The paper provides empirical insights about current status of Mongolian forwarders and difference of the important factors between transportation modes. Result shows that time factor is role factor to choose transport route and then cost factors. Additionally, this study shows 2 different route choose factors between air transport and shipping transport forwarders.

• 한국축산식품학회지
• /
• 제41권5호
• /
• pp.802-815
• /
• 2021

To investigate the effect of postmortem phases on lamb meat quality, the physicochemical quality, microstructure and water mobility of oyster cut, short loin, knuckle and silverside muscles from Small-Tail Han sheep were evaluated in the pre-rigor, rigor mortis and post-rigor phases. Pre-rigor lamb meat had higher pH and water holding capacity (WHC), whereas lower CIE L^*, b^*, hue angle values than rigor mortis and post-rigor meat (p<0.05). The Warner-Bratzler shear force (WBSF) values were higher in rigor mortis short loin and silverside than their pre-rigor and post-rigor counterparts, pre-rigor short loin had lower WBSF value than its post-rigor counterpart (p<0.05). Muscle fibers shrank laterally and longitudinally during the onset of rigor mortis. Rigor mortis and postrigor lamb meat exhibited wide I-bands, dark A-bands, short sarcomeres and large inter-myofibrillar spaces. The shift of immobilized water to free water and repulsion from the intra-myofibrillar space to the extracellular space result in the increase of water loss in rigor mortis and post-rigor lamb meat. The results of the principal component analysis (PCA) indicated that rigor mortis and post-rigor lamb meat had similar quality properties but different from pre-rigor lamb meat. In conclusion, the lamb meat in the pre-rigor phase had good tenderness, color and WHC. The results of this research could provide some theoretical references for lamb meat production and processing.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 춘계 총회 및 학술발표회
• /
• pp.110-113
• /
• 2003