• 한국작물학회지
• /
• 제48권6호
• /
• pp.534-539
• /
• 2003

이앙기 및 수확시기에 따른 쌀 품질을 식미 관점에서 검토하여 고품질 쌀 생산을 위한 기초 자료를 얻고자 2001년 서진벼, 일품벼, 추청벼를 공시하여 인천광역시 서구 경서동에 위치한 농업기반공사 김포간척지에서 실험한 결과는 다음과 같다. 1. 현미수량은 이앙시기간 고도로 유의한 차이가 있어서 3품종 모두 조기, 보통기재배가 만기재배보다 수량이 유의하게 많았다. 2. 백미의 단백질 함량은 이앙기와 수확시기간 고도의 상호작용이 있어서 발의 단백질 함량이 저하되는 수확시기는 이앙기에 따라 달랐다. 3. 이앙기에 따른 식미값은 서진벼와 일품벼는 조기와 만기재배에서 유의하게 높으나 추청벼는 만기재배에서도 떨어지지 않는 경향이었다. 4. 백미의 식미치는 등숙적산기온과 고도로 유의한 부의 상관(-0.43$^{**}$ )이 있어서 적산기온이 높을수록 식미치가 저하하였다. 5. 수량과 품질을 동시에 고려할때 조기 또는 보통기재배를 하되 수확시기는 출수후 40일로 다소 빠르게 하는 것이 유리한 것으로 판단되었다.

• 한국작물학회지
• /
• 제38권5호
• /
• pp.477-482
• /
• 1993

담배재배기간중 잎담배수량에 영향을 주는 양적형질의 변화량과 주당엽건물이나 엽면적과의 관계, 최종수량과의 상관등을 구명하여 담배 생산성 연구의 기초자료로 이용코자 시험한 결과를 요약하면 다음과 같다. 1. 주당엽건물량에 미치는 엽위별 엽면적의 영향력을 최대엽과 인접 4매엽면적의 합이 가장 높았으며 다음은 주당엽면적, 14매째의 엽면적순으로 나타났다. 2. 주당엽건물량에 미치는 엽이별엽건물량의 영향력은 14매째의 엽건물량이 가장 높았으며 다음은 최대엽과 인접 4매 엽면적의 합 순으로 나타났다. 3. 황색종잎담배 최종수량은 이식후 70일째의 건엽물량과 가장 깊은 관계가 있고 이식후일수 경과가 적은 시기일수록 상관도가 낮았다. 4. 버어리종 담배의 최종수량은 이식후 50일째 까지의 엽건물량과는 유의성 관계가 없었고 이후 65일일째 까지는 5% 수준에서 70일째에서는 1% 수준에서, 유의성관계가 인정되었다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.1021-1030
• /
• 1996

The mechanism of the mulch film cutter assembly designed as an integral part of a rice transplanting device was developed for mulching cultivation of early season culture rice. This mulch film cutter assembly was directly attached to the transplanting device of the rotary type Japanese transplanter. The principle is that the knife cut a planting slit on the polyethylene film while the planting finger immediately plants seedling into the soil through the planting slit. Computer results implied that the knife of the mulch film cutter assembly can make appropriate planting slit on the polyethylene film as the planting finger effectively plants the seedlings into the paddy soil through the same planting slits.

• Journal of Plant Biology
• /
• 제7권2호
• /
• pp.9-13
• /
• 1964

As to the up-lnd bamboos, I have reported, in my previous works, that Korea has two species in the genus of Pseudosasa, four in Pleioblastus, and other four in Sasa. In the present work, I dealt with Sasamorpha Purpurascens Nakai var. Borealis Nakai which proved the strongest vitality of all up-land bamboo yet found in various up-lands of Korea, and which might be most important from the utility view-point. This report is chiefly on its procreation. Sasamorpha Purpurascens Nakai var. Borealis Nakai can be found almost everywhere throughout the country, and its leaves and stems are much used in farms in various forms of manufacture. It is also welcomed as the feed for livestocks and as cover plants for aforestation, especially as the excellent means of errosion control on devastated hill sides. It is also widely accepted that it will provide, in the immediate future, abundant sources for the up-land bamboo pulp. As the first phase of my research plan on the subject, I undertook to determine the possible best way of its procreation, for which were included the experiments of inducing the growth of subterranean stems, the entire stand cutting, transplanting, reclaimed planting after burning etc. in order to observe the plant elongation, growing conditon, climatical effect etc. What has been fuond out so far given here as follows: 1) Of the various sections of the country, Mt. Odae area gives out the most excellent Sasamorpha Purpurascens Nakai var. Borealis Nakai(the leaf weight of which is 450 gr.) and Taekwanryong area comes the next class. This species can be transplanted anywhere in the South Korea. 2) The elongation of S.P. Nakai var. Borelais begins at around the middle of May and almost completely stops by the 20th of August. 3) The best studied transplanting season is supposed to be Feb. -April, for those transplanted during that period proved 100% of success. The next best transplanting season may be October. Rain fall does not have so much effect on transplanting as the growing season does. 4) In inducing the subterranean stems, the growing season can be ignored. The root expnsion is most animated during the months of April-June, the most active season for water absorption. Those stems induced during the winter proves more rapid growth. 5) The entire stand cutting shows greater growth than the reclaimed planting after burning and that, the growth is most vigorous during May-July, whereas during the hottest months of Aug-Sept. the growth shows only 5 cm. The new shoots grow slower both in the field of entire stand cutting and in the field of reclaimed planting after burning than in the otherwise fields.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1990년도 춘계 학술대회지
• /
• pp.18-19
• /
• 1990

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1990년도 춘계 학술대회지
• /
• pp.28-29
• /
• 1990

• 한국조경학회지
• /
• 제29권5호
• /
• pp.92-100
• /
• 2001

This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.72-72
• /
• 2019

참당귀는 가을에 모종을 생산하여 이듬해 봄에 이식 후 가을에 수확하는 2년 주기로 생산하는 방식으로 재배한다. 본 연구는 정식계절에 따른 참당귀의 생장특성을 비교하기 위해 경상북도 영주시에 위치한 해발고 350 m의 재배지에 실험구를 구분하여 가을(18년 11월)과 봄(19년 4월) 2회에 걸쳐 이식하였다. 연구 결과 생존율은 가을 이식 참당귀가 9.4% 높게 관찰되었고(가을-92.2%; 봄-82.8%), 추대율은 봄 이식 참당귀가 7.1% 낮게 관찰되었다(가을-37.3%; 봄-30.2%). 전체높이, 잎 길이 및 너비, 줄기 직경 등의 생장특성은 6월에 가을 이식 실험구에서 8월에 봄 이식 실험구에서 높은 생장율을 관찰하였다. 초기 생장은 가을 이식에서 긴 활착시간에 의해 높은 생장량이 발생한다고 사료되나 주 생장 시기인 6-8월이 되면 두 실험구 사이의 지상부 생장 차이가 미미한 것을 확인하였다. 향후 참당귀 뿌리의 생장특성 및 지표 성분 함량에 대한 추가 분석을 통해 참당귀의 최적 정식시기를 구명할 수 있을 것이라 사료되며 이에 따른 고품질 재배기술을 확립할 수 있을 것이라 판단된다.