• 제목/요약/키워드: transplanting

검색결과 1,540건 처리시간 0.03초

벼의 품종별 이앙시기가 미질 특성에 미치는 영향 III. 미립의 호화정도와 식미평가 (Characteristics of Grain Quality at Different Transplanting Times among Rice Cultivars)

  • 고재권
    • 한국자원식물학회지
    • /
    • 제11권2호
    • /
    • pp.146-151
    • /
    • 1998
  • A study was carried our to investigate the characteristics of physico-chemical components palatability of cooked rice accoring to different transplanting time. The treatments were consisted of five transplanting time, from May 5 to July 5 at 15 -day intervals, and six cultivars ; two early-maturing, two mid-maturing and two late-maturing cultivars which are clearly identified by evaluation of cumulative temperature and growth duration from seeding to heading of rice plants. In gelatinization characteristics of rice grain, alkali digestion value was low in the earlier transplanting regardlessof maturing types. Initial pasting temeprature maximum viscosity and breakdown as amylogram charcteristics were high at the transplanting of June 5. The palatability of cookedrice was evaluated that early-maturing cultivars were much better in early transplanting than in late transplanting . The optimum transplanting time for palatibility was the periods from May 5 to 20 in early maturing varieties, May 20 to June 5 in mid-maturing and June 5 to June 20 in late-maturing ones at Honam district in Korea.

  • PDF

Effect of Tillage and Seeding Methods on Percolation and Irrigation Requirement in Rice Paddy Condition

  • Chae, Je-Cheon
    • 한국작물학회지
    • /
    • 제43권4호
    • /
    • pp.264-268
    • /
    • 1998
  • The experiment was conducted to clarify irrigation requirement and percolation rate in rice paddy. The four rice cultural system of no-tin, till, transplanting, and direct seeding condition were treated in the lysimeter filled with sandy loam soil. The amounts of irrigation and soil percolation were measured daily, and irrigation requirement was estimated. The daily percolation was 19.5 l/$\textrm{m}^2$ in no-till direct seeding on flooded paddy surface, 17.4 l/$\textrm{m}^2$ in both of till-direct seeding on flooded surface and no-till transplanting, and 15.2 l/$\textrm{m}^2$ in transplanting plot. This is equivalent to 19.5, 17.4, and 15.2 mm per day, respectively. Highest irrigation requirement was 3,770 l/$\textrm{m}^2$ in no-till direct seeding plots. Others were 3,249, 2,577, and 2,321 l/$\textrm{m}^2$ in till-direct seeding, no-till transplanting and transplanting plot, respectively. The estimated irrigation requirement of no-till transplanting, till-direct seeding and no-till direct seeding was increased by 11, 37, and 59% compared to till-transplanting plot. Percolation rate of no-till transplanting, till direct seeding and no-till direct seeding was increased by 12%, 40%, and 66%, respectively compared to the till-transplanting plot. The percolation rate in paddy soil was increased greatly after reproductive stage of rice.

  • PDF

채소정식기용 로터리 식부장치 개발 (Development of Rotary Type Transplanting Device for Vegetable Transplanter)

  • 박석호;조성찬;김진영;최덕규;김충길;곽태용
    • Journal of Biosystems Engineering
    • /
    • 제30권3호
    • /
    • pp.135-140
    • /
    • 2005
  • Vegetable transplanting operation has been wholly depended on human labor that needs 18.4 hrs per 10 acres in Korea. Since periods of vegetable transplanting operations are limited, their mechanization has been strongly demanded. This study was conducted to develop a transplanting device that was the core technology for vegetable transplanter. In order to find out transplanting track and velocity of transplanting device, a kinematic analysis software was employed. Evaluation of prototype was carried out in the circular soil bin with high speed camera. Rotary type transplanting device produced an elliptic loci when two links of different lengths were moving to the opposite direction. The length of two links was 75mm and 44mm, respectively. Maximum displacement of rotary type transplanting device was 238mm. It seemed that the transplanting elliptic loci of transplanting device were identical between the simulation output generated by kinematic analysis software and the circular soil bin test result with a high speed camera. The rotary type transplanting device can be suitable fur transplanting short height vegetable, less than 20 cm length vegetables such as Chinese cabbage and cabbage, etc.

Effect of Rice Transplanting Date and Optimal Transplanting Dates for Mid-Plain Area in South Korea

  • Shingu Kang;Woonho Yang;Dae-Woo Lee;Jong-Seo Choi
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.59-59
    • /
    • 2022
  • The transplanting date of rice affects grain yield and quality, and it is changed by the environment during cultivation. Thus, it is important to provide the optimal transplanting dates for rice growers under global warming environment. In this study, transplanting date experiments with thirty-day-old seedlings of three cultivars (early, mid, and mid-late maturity) were conducted at the National Institute of Crop Science in Suwon from 2018 to 2021 to determine the optimal transplanting dates for and quantify the effect of planting dates on yield and quality. Transplanting date was strongly associated with culitvar across every year. Clear relationships between transplanting date and head rice yield in early and mid-late maturing rice varieties were observed, and the highest head rice yields were observed during transplantings in mid and late June for early maturing cultivar and mid June for mid-late maturing cultivar. It is obvious that the optimal rice transplanting dates have been shifted and are better later than the optimal transplanting dates in 2002-2004. Days to heading was also strongly associated with the transplanting date and cultivar with 89% of the variation explained. Days to heading was reduced in the later transplanting dates. Grain yield was strongly associate with biomass production during ripening(R2=0.85), however translocated biomass from leaf and stem showed little association with grain yield. The results from this study reconfirmed the importance of shifting optimal transplanting dates to maximize head rice yield for the Mid-plain area in South Korea.

  • PDF

육묘상자간 자동 육묘 이식 시작기 개발 (Development of A Automatic Transplanter for Bedding Plants Between Tray)

  • 류관희;한재성;류찬석;김기영
    • Journal of Biosystems Engineering
    • /
    • 제25권1호
    • /
    • pp.19-24
    • /
    • 2000
  • This study was carried out to develop gripper which to adaptive variable tray and to develop automatic transplanting system for seedling-production system between tray. This system consisted of five set of gripper and end-effector, a planting-width control unit, a tray transfer unit, and gripper moving device which move gripper between nursing tray and growing tray. This system used push-out rod to grasp plant instead of pull-out end -effector. Several types of fingers, which physically grip seedlings, were also developed and tested to ensure reliable transplanting operation of the gripper. The transplanting system detaches seedlings from a tray with push-o0ut rods, which were installed under the tray transfer unit. The performance of the transplanting system was evaluated by successive transplanting experiments. Using the best type of finger , the transplanting system produced 94.6% of transplanting success rate.

  • PDF

벼의 품종별 이앙시기가 미질 특성에 미치는 영향 II. 미립의 외관특성과 화학적 성분의 변화 (Characteristics of Grain Qualtiy at Different Transplanting Times among Rice Cultivars)

  • 고재권
    • 한국자원식물학회지
    • /
    • 제11권1호
    • /
    • pp.64-69
    • /
    • 1998
  • This experiment was conducted to investigatd the variation of some apearance chemical components at National Honam Agricultural Experiment Station in Korea. the treatements consisted of five transplating times, form May 5 to July 5 at 15-day interval , and six cultivars ; two early-maturing, two mid-maturing and two latematuring cultivars. The results showed that the variatio of grain appearance such as length-wide ratio was not significantly different in early -maturing cultivars, but mid-and late-maturing cultivars made slightly a round shape of grain in case of early transplanting. Percentage of complete grain was found to be high at transplanting of MAy 20 inearly-maturing cultivars and on June 5 in mid-and late-maturing ones. PERcentage of existed embryo after milling showed high at early transplanting of May 5 for early -maturing cultivars, and at the late transplanting of June 5 in early and late maturing one. The chemical components of rice grain showed high in protein , lipid,ash and amylose content inthe earlier transplanting, and also revealed high in carbohydrates, magnesium and potassium in the later transplanting of all cultivars.

  • PDF

남부지방에 있어서 수도수량구성요소 및 수량해석I. 재배시기에 따른 주요형질 및 수량의 변이 (Analytical Studies on the Rice Yield Component and Yield in South Region of Korea I. Variation in the Rice Yield Component and Yield under the Different Transplanting Dates.)

  • 김용재;김규진
    • 한국작물학회지
    • /
    • 제29권3호
    • /
    • pp.209-217
    • /
    • 1984
  • 남부 다모작지대의 도작 증수재배법을 확립하고자 이앙시기를 5월 20일부터 7월 5일까지 15일 간격, 4시기로 하여 수량 형질 및 수량변이를 검토한 결과를 요약하면 다음과 같다. 1. 엽수의 변이는 서광벼에서는 5월 20일 이앙구의 16.2매에 대하여 만식한 7월 5일 이앙구는 15.1매로 1.1매가 적었고 동진벼는 5월 20일 이앙구 14.8매에 대하여 7월 5일 이앙구는 13.1매로 1.7매가 적었다. 2. 지엽단축률은 작기가 늦어짐에 따라 커지는 경향이었다. 3. 작기 이동에 따른 출수일수의 변이는 서광벼는 5월 20일 이앙에서 약 75 일, 6월 5일은 68일, 6월 20일은 67일 정도이었으나, 7월 5일은 71일이 소요되었다. 4. 재배시기에 따른 최대수량은 서광벼는 5월 20일, 동진벼는 6월 20일 이앙이었고 수량생산기의 적산온도와의 관계는 서광벼는 1017$\pm$24$^{\circ}C$에서, 동진벼는 952$\pm$15$^{\circ}C$에서 600kg/10a 이상의 고위수량을 보였다. 5. 단위면적당 수수는 작기가 늦어짐에 따라 직선적으로 감소되는 부의 유의 상관관계(서광벼 r=-0.6768**, 동진벼 r=-0.5182**)가 인정되었다. 6. 작기 이동에 따른 1수 영화수는 서광벼는 작기가 늦어짐에 따라 많아졌고 동진벼는 작기가 빠르거나 늦은 경우 감소경향을 보였다.

  • PDF

무인비행체 영상을 활용한 고랭지배추 정식시기 추정 (Estimating of Transplanting Period of Highland Kimchi Cabbage Using UAV Imagery)

  • 이경도;박찬원;소규호;김기덕;나상일
    • 한국농공학회논문집
    • /
    • 제59권6호
    • /
    • pp.39-50
    • /
    • 2017
  • Growth monitoring of highland Kimchi cabbage is very important to respond the fluctuations in supply and demand from middle of August to early September in Korea. For evaluating Kimchi cabbage growth, it needs to classify the transplanting period of Kimchi cabbage, preferentially. This study was conducted to estimate the transplanting period of highland Kimchi cabbage from 2015 to 2016 in the main production area of highland Kimchi cabbage, Anbandegi, Maebongsan, and Gwinemi. Correlation between NDVI (Normalized Difference Vegetation Index) from UAV images and days after transplanting of Kimchi cabbage was high in early transplanting period. But because the growth curve of Kimchi cabbage showed S-type, joint use of multi-temporal linear regression equation for estimation of transplanting period was more suitable. Using application of these equations at Anbandegi, Maebongsan, and Gwinemi, we made the map of transplanting periods of highland Kimchi cabbage. Generally, highland Kimchi cabbage is harvested in sixty days later since transplanting. As a result, we could estimate the harvest time and area of highland Kimchi cabbage.

버어리종 담배의 이식시기가 수량 및 polyphenols의 종류와 함량에 미치는 영향 (Effect on the yield and kind, content of polyphenols under different transplanting time in burley tobacco)

  • 김용규;홍재식;김요태;나효환
    • 한국연초학회지
    • /
    • 제6권1호
    • /
    • pp.13-18
    • /
    • 1984
  • To find out the effect of transplanting time on the autonomic characters, yield of cured leaves and content of polyphenols in burley tobacco, three transplanting time were evaluated. The results obtained are as follows. Low temperature which was caused damage earliest stage of tobacco in early transplanting could escape by vinyl mulching and other treatment. 2. The major polyphenols in leaves were chlorogenic acid and rutin, small amount of scopolin and quercetin were also detected. 3. Chlorogenic acid decreased during curing. 4. Polyphenols content was not influenced by transplanting time.

  • PDF

Development of a Vegetable Transplanting Robot

  • Kang, Dong-Hyeon;Kim, Dong-Eok;Lee, Gong-In;Kim, You-Ho;Lee, Hye-Jin;Min, Young-Bong
    • Journal of Biosystems Engineering
    • /
    • 제37권3호
    • /
    • pp.201-208
    • /
    • 2012
  • Purpose: This study was conducted to develop a vegetable transplanting robot which transplants seedlings from a nursery tray to a plant pot using its four fingers. Method: The robot consists of the transplanting part, nursery tray moving part, plant pot moving part, main frame and controller. Two moving parts are controlled by the photo sensor and servo motor. The transplanting part was composed with two components; transporting device using E-MY2H(SMC Corp., Japan) for controlling finger position accurately and finger for transplanting the seedling. Results: Head lettuce using the transplanting robot was transplanted in 21 days after sowing based upon the seed shape measurement and removing examination. The optimal finger shape was thin pin type because it caused minimum damage to the roots of seedlings. Conclusions: The four inclined pin type was applied to remove the seedlings from the nursery tray. In addition, the transplanting capacity of the developed robot was 2800 pots per hour and the rate of success was 99% and above.