• Animal cells and systems
• /
• v.5 no.1
• /
• pp.45-50
• /
• 2001

Rana ovarian follicles consist of oocyte, vitelline envelope, granulosa cells, and theca/epithelial layer. Using scanning electron microscopy, the surface structure of each follicular component was investigated. Changes in oocyte surface during oocyte maturation were also examined. Theca/epithelial layer was almost transparent and some blood vessels and granulosa cells were observed underneath in intact follicle. The number of granulosa cells was estimated to be 6700-7200 per oocyte. The granulosa cells partially overlapped each other and their microvilli penetrated the vitelline membrane via holes present in the vitelline envelope and seemed to be linked to oocyte microvilli. After removal of the vitelline envelope by microforcep, oocyte microvilli were observed on the surface of the devitellined oocyte. The oocyte microvilli formed partial clusters on the surface of white spot area which appears iust before germinal vesicle breakdown (GVBD), whereas they were evenly distributed in other areas. The microvilli became shorter and less dense with oocyte maturation. The lengths of oocyte microvilli in the immature and mature oocyte were 1.5 $\mu$m and 0.6 $\mu$m, respectively. The present study suggests a fundamental structural change occurring on the oocyte surface during maturation.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.417-432
• /
• 1997

The structures of the fertilized egg envelope in three species of cichlidae, golden severum (Cichlasoma severum var.), convic cichlid (Cichlasoma nigrofasciatum) and discus (Symphysodon aequifasciatus) were investigated by routine light and electron microscopies. The fertilized eggs of all three species were of the non-transparent, ellipsoidal, adhesive and non-floted type. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. In golden severum, an outer surface of egg envelope was covered by a reticular layer, that of convic cichlid was covered by an amorphous reticular layer and that of discus was covered by a branched reticular layer. The fertilized egg envelopes consisted of two distinct layers, an adhesive outer layer and an inner layer, consisted of lamellae alternating with interlamellae of lower electron density, in all three species; an inner layer of golden severum was $15\sim17$ layers, that of convic cichlid was $14\sim16$ layers, and that of discus was $18\sim19$ layers.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.89-96
• /
• 2005

The ultrastructures of the fertilized egg envelope from Hyphessobrycon serpae belonging to Characidae was studied using scanning and transmission electron microscopes to get systematic fundamental data for classification of species and to confirm whether micropyle is a common trait of Characidae or not. The fertilized egg was of colorless, transparent, spherical, adhesive and demersal type. There were not oil droplets in vitelline membrane and attached structures in the outside of fertilize egg envelope. The egg envelope had a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 13 to 15 protruded lines of the egg envelope in a radiated form. The outer surface of fertilized egg envelope was covered by reticular adhesive fibrous structures and irregularly arranged by pore canals. The fertilized egg envelope consisted of three distinct layers an outer adhesive fibrous layer with high electron density, a middle layer with pore canals, and an inner layer consisting of 6 to 7 lamellae alternating layers with interlamellae of lower electron density. These ultrastructural characters of fertilized egg envelope form Hyphessobrycon serpae can be utilized in taxonomy of teleost, and as fundamental data for study on early development of fertilized egg. It seems that the morphology of micropyle is a common trait of Characidae

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.55-60
• /
• 2008

This study is on the analysis of power output of transparent thin-film PV windows which are integrated into the building envelope instead of traditional windows. 3 installation angles of vertical, horizontal and $30^{\circ}C$ inclination are investigated. To measure power output of PV windows, full scale mock-up house was designed and constructed. The power performance of PV window system was analyzed for horizontal angle, declination angle and vertical angle according to incline angle. Monitoring data are gathered from November 2006 to August 2007 and statistical analysis is performed to analysis a characteristics of power performance of transparent PV windows. Results show that annual power output of PV window with horizontal angle is 844.4kWh/kWp/year, declination angle 1,060kWh/kWp/year and vertical angle 431.6 kWh/kWp/year.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2003

Various efforts to combine new high-tech materials with solar system have been progressed nowadays in order to improve the performance of the existing passive solar system. TIM(Transparent Insulation Material) replacing the conventional outer building envelope glazing as well as the wall is good example for this trend. TI integrated wall is a thermal mass wall with a special shaped TIM instead of using typical envelope materials The tested TIM type is a small(diameter 4mm and thickness 50mm) capillary tube of Okalux model and cement brick(density 1500kg/m3). The purpose of this study was to analyze the thermal performance through the actual measurements performed in a test cell. This study was carried out to justify the following issues. 1) the impact of Tl-wall over the temperature variations 2) the impact of mass wall surface absorptance over the transient thermal behavior and 3) the impact of thermal mass wall thickness over the temperature variations. Finally, as results indicated that the peak time of room temperature was shifted about one hour early when absorptance of thermal mass wall changed from 60% to 95% for the 190mm thickness thermal mass wall test case. the temperature difference of both surfaces of thermal mass wall surface showed about $23^{\circ}C$ during a day of March for the 380mm thickness thermal mass wall case. However, the thermal mass wall was over-heated by outside temperature and solar radiation in a day of May the temperature difference of both surfaces of thermal mass wall surface was indicated $10^{\circ}C$ and inside temperature was observed more than average 22C.

• Journal of the Korean Institute of Educational Facilities
• /
• v.2 no.2
• /
• pp.17-25
• /
• 1995

Because of energy crisis and environment pollution, we have become more conscious of the need to conserve heat in buildings. In response to this need. new requirements have been developed for insulation and other matters relating to energy consumption. Among others, more promising is to use the energy that is all around us in the dynamic forces of nature:the wind, tides, waves, rivers, geothermal hot spots, and the sun. The problem is that we have not been forced to find the technological means to convert these natural energies into usable forms because it has been too easy simply to dig or pump our energy out of the ground. Now, the problem is not a shortage of energy itself, but a shortage of technology for converting the energy that lies aoo around us into usable forms. Energy-conversion technology is the real issue, and solar energy is one of the brightest and most promising frontiers in energy conversion. All buildings are wrapped in a skin. Generally skins protect the person in stay from rain, wind, dust, noise, cold, hot etc.. However, there are some skins that provide energy from given environment into the building. Out of aoo, transparent insulation material is one of these materials that most effectively satisfies this kind of envelope function. Since, there are no research on transparent insulation in Korea, it has been studied very actively in Europe and in America. Thus, in this thesis, we will theoratically study and analyze how the heat flows through a trans arrent insulated opaque wall of a school building in Korea. It will be an important information for the effective using guidelines of transparent insulation materials in Korea.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2009

The ultrastructure of the fertilized egg envelope in Cichlasoma managuensis belonging to Cichlidae were investigated by routine light and electron microscopes. The fertilized eggs of Cichlasoma managuensis was of the light yellow, non-transparent, ellipsoidal, adhesive and nonfloted type. The size of fertilized egg was the major axis $1.92{\pm}0.08\;mm$, the minor axis $1.43{\pm}0.04\;mm$. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. An outer surface of fertilized egg envelope was covered by a adhesive reticular structures and the fertilized egg envelopes consisted of two distinct layers; an outer adhesive layer and an inner layer of $13{\sim}15$ horizontal lower electron density lamellae alternating with interlamellae of higher electron density. The external shape of fertilized egg is common trait of fishes belonging to Cichlidae and these ultrastructural characters of fertilized egg envelope can be utilized in taxonomy of teleost.

• KIEAE Journal
• /
• v.9 no.5
• /
• pp.39-46
• /
• 2009

Most Plastic Green Houses in Korea are made according the European weather condition, which lead to have very low solar energy efficiency. Moreover, the function of green houses, as well as the structure of them, has not changed for Korean weather condition. Therefore, the structure and function of them should adopt the regional weather condition in order to improve the energy efficiency. This paper investigates the current plastic green housesin Korea, and presents an alternative for improving the energy efficiency. The elements of green houses were investigated. When using a partial opaque insulation with a thermal storage body, the difference of indoor air temperature became 20C during daytime, and 5C during night, which will save massive fossil fuels.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.343-351
• /
• 1999

The structures of the fertilized egg envelope from three species, three-spot gourami (Trichogaster trichopterus), pearl gourami (Trichogaster leeri) and marble gourami (Trichogaster trichopterus trichopterus) belong to Belontiidae were observed, utilizing light, scanning and transmission electron microscopes. In all three species, the fertilized eggs were the colorless, transparent, spherical, adhesive and pelagic type. A large oil droplet was located in vitelline membrane of the fertilized egg. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. Specially, the micropyle of three-spot gourami was similar to that of marble gourami which is subspecies of three-spot gourami. An outer surface of the fertilized egg envelope was arranged by grooves in all three species. The fertilized egg envelopes consists of two distinct layers; an adhesive outer layer and an inner layer with high electron density. In conclusion, the morphological similarity of the fertilized egg, micropyle, outer surface and transverse section of the fertilized e9g envelope seems to be an indication of the Belontiidae.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.155-161
• /
• 2011

Three spot gourami (Trichogaster trichopterus Pallas, 1770) is a teleost belonging to Belontiidae. The oogenesis of three spot gourami was investigated by light microscope. The ovary was of light peach color and ellipsoidal shape with the major axis 2 cm and the minor axis 1 cm. Cytoplasm of oogonia was basophilic and many nucleoli were located at inside of nuclear membrane. In primary oocyte, lipid droplets were distributed only in the marginal area first, than at nuclear envelope near. In secondary oocyte, the egg envelope was formed and yolk vesicles was formed in the marginal area. The basophilic substance of cytoplasm was changed to acidic. In case of matured egg, thickness of egg envelope and size of egg were increased. The yolk vesicles were changed to yolk mass in accordance with development. The fertilized eggs were the colorless, transparent, spherical, adhesive and pelagic type. A large oil droplet was located in vitelline membrane of the fertilized egg. In conclusion, the oogenesis of three spot gourami was characterized by the increase in cell size, the formations of lipid droplets and yolk, the decrease of basophilic substance in the cytoplasm, and formation of one large oil droplets.