• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.7-10
• /
• 2022

A functional polyethylene terephthalate substrate to increase light extraction efficiency of organic light-emitting diodes is studied. We formed nano-structured PET surfaces by controlling the power, gas, and exposure time of the linear ion-beam. The haze of the polyethylene terephthalate can be controlled from 0.2% to 76.0% by changing the peak-to-valley roughness of nano structure by adjusting the exposure cycle. The treated polyethylene terephthalate shows average haze of 76.0%, average total transmittance of 86.6%. The functional PET increases the current efficiency of organic light-emitting diodes by 47% compared to that of organic light-emitting diode on bare polyethylene terephthalate. In addition to polyethylene terephthalate with light extraction performance, by conducting additional research on the development of functional PET with anti-reflection and barrier performance, it will be possible to develop flexible substrates suitable for organic light-emitting diodes lighting and transparent flexible displays.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.22-26
• /
• 2014

This paper introduces homogeneous liquid crystal (LC) orientations on chemically modulated polystyrene (PS) surfaces using various ion beam (IB) exposure time. Transparent PS was replaced with conventional polyimde material. Especially, PS has higher transparent property than conventional polyimide thin film and it means PS is more suitable material for producing high brightness mobile LCD. As a non-contact process, IB bombardment process induced LC orientation in the direction parallel to the IB process. Through x-ray photoelectron spectroscopy, it was shown that the chemical compositional changes of the IB-irradiated PS surfaces were determined as a function of IB exposure time. Using this analysis, the optimal IB bombardment condition was determined at IB exposure time of up to 15 s. Moreover, thermal stability on IB-irradiated PS surfaces were carried out which showed that a relatively high IB exposure time induced a thermally stable LC alignment property. And it has a highly potential of mobile high transparent mobile LCD such as smart phone display and mobile information device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.714-717
• /
• 2008

In this paper, we propose a three-dimensional (3D) integral imaging system using an elastic lens array instead of conventional rigid lens array. The lens array is made of polydimethylsiloxane (PDMS) that is optically transparent and flexible material. We can stretch the PDMS lens array to be expanded into a certain extent, and control the lens pitch of the system easily. That flexible design enables a fine 3D integral imaging display.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.633-636
• /
• 2008

A series novel films of polyimide (PI) and co-polyimide (Co-PI) containing fluorine with colorless, flexible properties was prepared by a two-step process from various commercial aromatic monomers such as 4,4'-(Hexafluoro iso propylidene) diphthalic anhydride (6FDA), 2,2'-Bis(Trifluoromethyl) benzidine (TFDB), 2,2-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (AH6FP) and Bis(4-(3-aminophenoxy)phenyl)sulfone (BAS). Furthermore, these obtained transparent and flexible Co-PI films exhibited excellent thermal stability with the decomposition temperature (at 5% weight loss) around of $500^{\circ}C$ and the glass transition temperature ($T_g$) in the range of $275-350^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.355-358
• /
• 2008

We report a method for improving characteristics of AC PDP in this study. This improvement is obtained by spreading MgO nanoparticles on transparent dielectric layer. These nanoparticles are covered with MgO protective layer by electron beam evaporation. MgO nanoparticle has difference in cathodoluminescence stronger than MgO layer by electron beam evaporation. This method worked for reducing statistical delay especially. Efficacy, discharge voltage and luminance were also improved But these improvements has limited lifetime because continuous ion bombardments changed characteristic of MgO surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.939-942
• /
• 2008

Moir$\acute{e}$s are a natural interference phenomenon which occurs whenever a transparent regular pattern plate is overlapped on another regular pattern plate. In the contact-type 3 dimensional imaging systems, the moires are inherent because an image display panel is seen through a viewing zone forming optical plate. The mathematical analysis of moires in the systems shows that they can be minimized by the proper selection of overlapping angles between them. The angle is different for pixels with different aspect ratios.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1469-1472
• /
• 2006

We investigated the electrical and optical properties of ZnO:Al thin films as a function of the thermal process conditions. The film was prepared by RF magnetron sputtering followed by annealing in a box furnace in air. An ZnO:Al (98:2) alloy with the purity of 99.99% (3 inch diameter) was used as the target material. The electrical properties of the transparent electrode, exhibited surface oxidation as a result of rapid oxygen absorption with increasing annealing temperature. The processed ZnO:Al films and commercial ITO(indium-tin-oxide) were applied to an OLED stack to investigate the current density and luminescence efficiency. The efficiency of the device using the ZnO:Al electrode was higher than that from the device using the ITO electrode.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.64.1-64.1
• /
• 2012

Next generation displays such as high performance LCD, AMOLED, flexible display and transparent display require specific TFT back-planes. For high performance TFT back-planes, low temperature poly silicon (LTPS), and metal-oxide semiconductors are studied. Flexible TFT backplanes require low temperature processible organic semiconductors. Not only development of active semiconducting materials but also design and synthesis of semiconductor corresponding gate dielectric materials are important issues in those display back-planes. In this study, we investigate the high heat resistant polymeric gate dielectric materials for organic TFT and inorganic TFT with good insulating properties and processing chemical resistance. We also controlled and optimized surface energy and morphology of gate dielectric layers for direct printing process with solution processible organic and inorganic semiconductors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.5-9
• /
• 2001

New types of ac plasma display panel (PDP) cells are designed and tested electro-optically. We proposed two types of sustaining electrode to improve the luminous efficiency. One is the meander electrode, which has longer discharge path length and smaller electrode area than conventional type. The other is the bridge-shaped electrode, which eliminates the transparent electrode near the barrier ribs. They show higher luminous efficiency and lower power consumption than conventional type.