• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.568-573
• /
• 2011

AZO (Al doped ZnO) thin films were deposited on the quartz substrates with thickness variation from 25 to 300 nm by using PLD (pulsed laser deposition). XRD (x-ray diffractometer), SPM (scanning probe microscopy), Hall effect measurement and uv-visible spectrophotometer were employed to investigate the structural, morphological, electrical and optical properties of the thin films. XRD results demonstrated that films were preferrentially oriented along the c-axis and crystallinity of film was improved with increase of film thickness. As for the surface morphologies, the mean diameter and root mean square of grains were increased as the film thickness was increased. When the film thickness was 200 nm, the lowest resistivity of $4.25{\times}10^{-4}\;{\Omega}cm$ obtained with carrier concentration of $6.84{\times}10^{20}\;cm^{-3}$ and mobility of $21.4\;cm^2/V{\cdot}S$. All samples showed more than 80% of transmittance in the visible range. Upon these results, it is found that the samples thickness can affect their structural, morphological, optical and electrical properties. This study suggests that the resistivity can be improved by controlling film thickness.

• 한국세라믹학회지
• /
• 제42권8호
• /
• pp.554-560
• /
• 2005

The engineering ceramic needs the properties of high strength, hardness, corrosion-resistance and heat-resistance in order to withstand thermal shock or applied nonuniform stresses without failure. The densely coated porous ceramics can be used for machine component, electromagnetic component, bio-system component and energy-system component by their high-performances from superior coating properties and light-weight characteristics due to the structure including pore by itself. In this study we controlled the porosity of silica and alumina, $8.2\~25.4\%$ and $23.4\~36.0\%$, respectively, by the control of sintering temperature and starting powder size. We made bilayer structures, consisting of a transparent glass coating layer bonded to a thick substrate of different porous ceramics by a thin layer of epoxy adhesive, facilitated observations of crack initiation and propagation. The elastic modulus mismatch could be controlled using different porous ceramics as the substrate layer. Then we applied 150 N force using WC sphere with a radius of 3.18 mm by Hertzian indentation. As a result, the crack initiation in the coating layer was delayed at lower porosity in the substrate layer, and the damage in the coating layer was relatively smaller at the bilayer structure coated on higher elastic substrate.

• 한국전기전자재료학회논문지
• /
• 제36권2호
• /
• pp.191-196
• /
• 2023

In this paper, for the application of ultrasonic cleaners for cleaning dentures and transparent braces, Pb(Mn_1/3Nb_2/3)O₃-Pb(Ni_1/3 Nb_2/3)O₃-Pb(Zr,Ti)O₃ [PMN-PNN-PZT] system ceramics were manufactured and their dielectric and piezoelectric properties were investigated. Overall the best properties suitable for the device applications such as ultrasonic cleaner were obtained from the ceramics sintered at 920℃: bulk density of 7.8 g/cm³, the dielectric constant (ε_r) of 1,689, piezoelectric charge constant (d₃₃) of 433 pC/N, planar electromechanical coupling factor (k_p) of 0.64, mechanical quality factor (Qm) of 835, S₁₁^E of 13.37 (10^-12 N/m²), and Curie temperature of 315℃ By using the physical properties of this composition, the ultrasonic cleaner was designed and simulated using the commercial ATILA software. For the three-layered ceramics with the dimension of 25 mm × 25 mm × 2.5mm, an excellent displacement of 8.998 10^-3 m) and the sound pressure of 147.68 dB were recorded.

• ETRI Journal
• /
• 제25권2호
• /
• pp.73-80
• /
• 2003

This paper describes an effective method for forming silicon oxide on silica-on-silicon platforms, which results in excellent characteristics for hybrid integration. Among the many processes involved in fabricating silica-on-silicon platforms with planar lightwave circuits (PLCs), the process for forming silicon oxide on an etched silicon substrate is very important for obtaining transparent silica film because it determines the compatibility at the interface between the silicon and the silica film. To investigate the effects of the formation process of the silicon oxide on the characteristics of the silica PLC platform, we compared two silicon oxide formation processes: thermal oxidation and plasma-enhanced chemical vapor deposition (PECVD). Thermal oxidation in fabricating silica platforms generates defects and a cristobalite crystal phase, which results in deterioration of the optical waveguide characteristics. On the other hand, a silica platform with the silicon oxide layer deposited by PECVD has a transparent planar optical waveguide because the crystal growth of the silica has been suppressed. We confirm that the PECVD method is an effective process for silicon oxide formation for a silica platform with excellent characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.181-182
• /
• 2000

The glass compositions of $PbO-SiO_2-B_2O_3$ system and $P_2O_5-PbO-ZnO$ system for the transparent dielectric materials for front panel and $P_2O_5-ZnO-BaO$ and $SiO_2-ZnO-B_2O_3$ for the reflective dielectric materials for back panel of PDP(Plasma Display Panel) were investigated. As a transparent dielectric materials for front panel, $PbO-SiO_2-B_2O_3$ glass showed good dielectric properties, high transparency and proper thermal expansion matching to soda-lime glass substrate. And the reflective dielectric materials for back panel were prepared from parent glass of $SiO_2-ZnO-B_2O_3$ system and oxide filler. It was found that these glass-ceramics are useful materials for reflective dielectric layers, as those have a similar thermal expansion to soda-lime glass plate, high reflectance, low sintering temperature.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.59-62
• /
• 2019

Y2O3-MgO nanocomposites are promising materials for hypersonic infrared windows and domes due to their excellent midIR transmittance and mechanical properties. In this work, influence of SPS heating rate on the microstructure, IR transmittance, and mechanical properties of Y2O3-MgO nanocomposites was investigated. It was found that the average grain size decreases with a decreasing heating rate, which can be attributed to high defect concentration by rapid heating and deformation during densification. Also, the residual porosity decreases with a decreasing heating rate, which is ascribed to the enhancement of grain boundary diffusion by a large grain-boundary area (a small grain size). Consequently, high transmittance and hardness were attained by the low heating rate. On the other hand, the mechanical strength showed little difference with the heating rate change, which is somewhat different from the general knowledge on ceramics and will be discussed in this letter.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1078-1084
• /
• 2003

비선형 광학재료 및 광촉매를 개발하기 위하여, $Na_2$O-Nb$_2$ $O_{5}$-Te $O_2$계 유리를 일반적인 용융 및 급냉하는 방법으로 제조하였다. 그리고 $Na_2$O-Nb$_2$ $O_{5}$-Te $O_2$계 유리의 광학적 성질과 나노-결정화거동을 조사하였다. $Na_2$O-Nb$_2$ $O_{5}$-Te $O_2$계 유리의 광학적 성질과 물리적 성질은 다음과 같다. 굴절률(n) 은 2.04$\pm$0.04, 밀도(g/㎤)는 4.87$\pm$0.58, 광 에너지 밴드(eV)는 3.14$\pm$0.04이였다. 나노결정으로 구성된 투명한 결정화유리는 3$50^{\circ}C$에서 l시간 열처리한 후, 이것을 다시 40$0^{\circ}C$에서 l 시간 열처리하여 얻었다. 나노결정으로 구성된 Cubie 결정상은 47$0^{\circ}C$ 이상의 온도에서 새로운 결정상으로 변화하였다.

• 한국결정성장학회지
• /
• 제21권5호
• /
• pp.214-217
• /
• 2011

Fresnoite 결정화 유리는 최근 비선형 광학특성으로 인하여 널리 연구되어 지고 있다. 그러나, 이전 연구 결과를 통하여 투명결정화 유리의 화학 조성으로는 정량적으로 Fresnoite 구조에 유사한 조성을 조절하는 것에 한계가 있음을 확인 할 수 있다. 본 연구에서는 $K_2O-TiO_2-SiO_2$ glass의 제조한 후, 제조된 유리를 $Sr(NO_3)_2$ 용융염에 담지하여 모유리의 표면에 Fresnoite 결정을 형성시키는 방법으로 투명결정화 유리를 제조하고, 이 때 Sr 이온이 비선형광학효과에 미치는 영향을 살펴보았다. XRD를 통하여 담지 시간에 따른 결정상 변화와 열처리를 통한 결정상 변화를 관찰하였으며, FE-SEM을 사용하여 생성된 결정의 미세구조와 Nd : YAG laser를 사용하여 2차비선형특성의 유무를 관찰하였다.

• 한국연소학회지
• /
• 제10권3호
• /
• pp.17-24
• /
• 2005

A sub-millimeter scale catalytic combustor with a simple plate-shaped combustion chamber was fabricated. A porous ceramics support coated with platinum catalyst was placed in the chamber. The combustor has a gallium arsenide window on the top that is transparent to infrared ray. The temperature distribution in the combustion chamber was measured using infrared thermal imager while hydrogen-air premixture is steadily supplied to the combustor. The area where the catalytic reaction took place broaden for higher flow rate and lower equivalence ratio made activated area in the combustion chamber broaden. The amount of coated platinum catalyst did not affect the reaction. Stop of reaction, which is similar to flame quenching of conventional combustion, was investigated. Large content of heat generation and broad activated area are essential criteria to prevent stop of reaction that has a bad effect on the combustor performance.

• The Korean Journal of Ceramics
• /
• 제1권3호
• /
• pp.152-154
• /
• 1995

A non-hydrolytic sol-gel process was developed to fabricate low-hydroxyl hard gels. The reaction of tert-butyl alcohol with silicon halides provided transparent low-hydroxyl hard gels. Some properties such as transparency, density, and refractive index was successfully doped into the hard gel matrices. The absorption spectrum of an erbium-doped methylsilsesquioxane was investigated to decide the pumping wavelength of an argon laser. The luminescence of the erbium-doped gel at 664 nm seems to be due to $4^F{9/2}\to 4^I_{15/2}$ transition.