• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.927-936
• /
• 2012

In this paper, we study joint feedback design for interference channel (IC). We develop a simple iterative algorithm for the joint feedback design to maximize the expected rate when the transmitters use partial channel-state information (CSI) obtained by the feedback link. Also, from the simulation result, we show that the performance gain is obtained compared to the conventional scheme.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1180-1187
• /
• 2004

Relative displacements between decks should be within the allowable limit under horizontal forces in high-speed railway bridges. Longitudinal force transmitters(LFT) have been introduced ih high-speed railway bridges for test track. The horizontal forces on the pier supporting the fixed bearing are transmitted to the near piers supporting the sliding bearings by LFT, The performance of LFT was investigated by field test in which the braking and acceleration tests using KTX were conducted in Baebang viaduct. The relative displacements between decks were measured infield test and were compared with the numerical results and the allowable limit.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1176-1181
• /
• 2010

This paper proposes three positioning algorithms using TOA measurements: 1) The well-known linearization method using Taylor series, 2) a modified Savarese method considering measurement noise, which does not need linearization, and 3) a modified Bancroft method where TOA measurements instead of pseudorange measurements are considered. Furthermore, through an error analysis, for Savarese method, divergence of altitude is anticipated if the transmitters are located at the same height. To prevent height divergence, the Savarese method is modified again for receivers which assumed moving on the even plane. Error analysis also shows the relationship between Bancroft and Savarese method. From the analysis it is expected that the performance of Savarese method is worse than Bancroft method because of error amplification during difference operation. Experiments using real TOA measurement from the time difference of ultra sound and RF validate the proposed methods and show that analysis is correct.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.169-174
• /
• 2006

In this work, we demonstrate a novel compact mechanical beam steering transmitter based on a direct vertical integration of a 2-D MEMS-based mechanical beam steering antenna with a VCO on a single silicon platform. By eliminating the long feed lines and waveguide metal blocks, the radiation pattern has been improved vastly, resulting in an almost ideal pattern at every scan angle. The losses incurred by the feed lines and phase shifters are also eliminated, which allows the transmitter to be implemented using only a single VCO. The system complexity has been greatly reduced with a total module size of only 1.5 cm ${\times}$ 1.5 cm ${\times}$ 0.4 cm. This work demonstrates that RF MEMS can be a key enabling technology for high-level integration.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.806-813
• /
• 1991

In this paper, we suggested the diagnosis of the optical FSK transmitter output characteristics using the Micheloson interferometer. The transmitter is designed by the direct frequency modulation effect of a semoconductor laser diode. The optical FSK transmitter consists of a temperature stabilized semiconductor laser diode and an optimally designed equalizer. It is modulated by 100Mbit/s PRBS Generator to diagonosis of Optical FSK transmitter output characteristics. The Michelson Interferometer is used for the optical frequency discriminator which transforms the output frequency of the transmitter to the amplitude of light. The measurement of the performance of the transmitter to the amplitude of light. The measurement of the performance of the transmitter computer the transmitted data and their eye pattern with the simulation results, the received data and their eye pattern. As the result of experiment, the data transfer rate of the transmitters is 100Mbit/s.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.260-279
• /
• 2015

In this paper, we investigate physical layer security for multiple decode-and-forward (DF) relaying underlay cognitive radio networks (CRNs) with fixed transmit power at the secondary network against passive eavesdropping attacks. We propose a simple relay selection scheme to improve wireless transmission security based on the instantaneous channel information of all legitimate users and the statistical information about the eavesdropper channels. The closed-form expressions of the probability of non-zero secrecy capacity and the secrecy outage probability (SOP) are derived over independent and non-identically distributed Rayleigh fading environments. Furthermore, we conduct the asymptotic analysis to evaluate the secrecy diversity order performance and prove that full diversity is achieved by using the proposed relay selection. Finally, numerical results are presented to verify the theoretical analysis and depict that primary interference constrain has a significant impact on the secure performance and a proper transmit power for the second transmitters is preferred to be energy-efficient and improve the secure performance.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.189-195
• /
• 2016

In this paper, we newly introduce a visible light communication (VLC) repeater using the LED array in an LED lamp. The LED array is used for a light source in the repeater, which radiates light both for illumination and data transmission. A VLC repeater is made by adding some electronic circuits to the LED array including a photodetector, a demodulator, and a modulator. The repeater is installed on the ceiling of a room like a conventional LED lamp, receives the VLC signal from an arbitrary transmitter, recovers data, and radiates the signal to wide area in the room. We used a carrier frequency of 100 kHz for the uplink from a transmitter to the repeater, and 500 kHz for the downlink from the repeater to a receiver. The repeater is useful for increasing the transmission path to wide area over the obstacles that may exist between VLC transmitters and receivers.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1997

The microbial distribution on 115 transmitter of telephone in 5 site were studied during the period Mar to May 1996. The result were follows: 1. The public telephone at Kangnam terminal showed highest contamination of total bacteria (1.5 $\times $ 10$^{4}$/cm$^{2}$ and the telephone at home showed lowest contamination at the mean 4.6/cm$^{2}$ 2. The most frequent bacteria was staphylococcus epidermides and staptylococcus aureus which is pathogen of food poison was frequently isolated. 3. The public telephone at Seoul showed the highest contamination of fungi and the telephone at home showed lowest contamination of Fungi 4. In fungi 631 strains of 16 species were isolated that of highest frequency is confirmed to be Asperillus fumigatus which is pathogen of Aspergillosis, Nigar and Penicillium spp. were frequently isolated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.747-752
• /
• 1998

Ultrasonic sensors have been widely used to recognize the working environment for a mobile robot. However, their intrinsic problems, such as specular reflection, wide beam angle, and slow propagation velocity, require an excessive number of sensors to be integrated for achieving the sensing goal. This paper proposes a new measurement scheme which uses only two sets of ultrasonic sensors to determine the location and the type of a target surface. By measuring the time difference between the returned signals from the target surface, which are generated by two transmitters with 1 ㎳ difference, it classifies the type and determines the size of the target surface. Since the proposed sensor system uses only two sets of ultrasonic sensors to recognize and localize the target surface, it significantly simplifies the sensing system and reduces the signal processing time so that the working environment can be recognized in real time.