• 대한인간공학회지
• /
• 제32권4호
• /
• pp.303-308
• /
• 2013

Objective: The aim of this study is to understand health effect of hand-arm transmitted vibration. Background: Electronic vibration tools have been used in many industries. These tools evoke hand-arm transmitted vibration that cause hand-arm vibration syndrome. Method: Various papers on the hand-arm transmitted vibration and its health effects have been reviewed to know what health effect caused. Results: Hand-arm transmitted vibration causes circulatory, neural, musculoskeletal and other disturbance. Conclusion: The previous studies focused on the epidemiology and physiology for hand-arm transmitted vibration. So, now we should focus on a prevention and guideline of hand-arm transmitted vibration. Application: These results can be used to know health effect of hand-arm transmitted vibration.

• 대한인간공학회지
• /
• 제19권2호
• /
• pp.75-86
• /
• 2000

In this study, the characteristics of transmitted vibration on HAS(hand-arm system) were identified to evaluate physical load due to the work surface orientation, tool weight and push force during powered drilling tasks. The characteristics of transmitted vibration on work surface orientation showed that the acceleration of transmitted vibration on horizontal work surface was higher than that on the vertical work surface. Regarding the characteristics of transmitted vibration on tool weight, the vibration acceleration level becomes lower as the tool weight becomes heavier. The amount of transmitted vibration on hand-arm system was decreased down to the tool weight of 2.4kg. However, as the tool weight becomes heavier than 2.8kg, the amount of transmitted vibration was increased and had peak value at 3.2kg of tool weight. Regarding the characteristics of transmitted vibration on push force, the vibration acceleration level goes higher, as the push force becomes larger. The characteristics of transmitted vibration on the axis of vibration showed that the direction of $Z_h$ had the highest acceleration compared to the direction of $X_h$, and $Y_h$. The direction of $X_h$, $Y_h$ and $Z_h$ had the highest acceleration of transmitted vibration on the hand, wrist and elbow, respectively. The results of this study showed that the condition which affect the lowest physical load to the subject on the powered drilling task would be working with the 2.4kg of tool weight on the vertical work surface.

• 소음진동
• /
• 제10권2호
• /
• pp.299-305
• /
• 2000

In this study, the characteristics of transmitted vibration on hand-arm system are examined when operating electric hand tools. Also through the correlation analysis between anthroponetric data and transmitted vibration, and comparison study with appropriate amount of work done based on the ISO criteriaa, the basic data for the ergonomic work design can be presented. The types of electric tools and works for the experiment are drill (general type and impact type), grinder, wire brush and steel to analyze the characteristics of transmitted vibrations, the amount of transmitted vibrations in X, Y and Z direction at tool(T), hand(H), wrist(W), and the joint between foream and upper arm(A) were measured at the frequency range of 6.3∼1000[HZ]. Also, the limit of human exposure to vibration, and the response of frequency were conducted.

• 국제지역연구
• /
• 제14권2호
• /
• pp.275-296
• /
• 2010

이 연구는 성매매특별법 이후 기존의 성병검진정책이 혼선을 빚고 있는 한국의 상황에서 국제적으로 성병감염률 감소의 대표적 모델로 꼽히고 있는 태국 사례의 고찰을 통해 성매매자 및 일반 국민의 성병감염을 방지하는 효과적인 방안을 모색하고자 한다. 이를 위해 이 연구는 먼저 성매매와 성병의 관계에 대한 최근의 논란을 가중시킨 성매매특별법에 대해 중점적으로 살펴보고 아울러 이 법의 시행에 따른 성병관리체계의 변화에 대해 알아본다. 태국 사례와 관련해서는 성행위에 관련된 사회문화적 및 정치경제학적 요인들과 성병관리정책의 연관성을 중심으로 살펴본다. 마지막으로는 태국 사례와의 비교를 바탕으로 성매매특별법하에서 한국의 성병관리체계가 보다 효과적이 될 수 있는 방안들에 대해 구체적으로 살펴본다.

• 한국통신학회논문지
• /
• 제34권1C호
• /
• pp.81-89
• /
• 2009

본 논문에서는 임펄스 라디오 기반의 D-ATR UWB (Differential-Average Transmitted Reference Ultra Wide Band) 시스템을 제안한다. 기존의 TR (Transmitted Reference), ATR (Average TR) 등의 TR-UWB 시스템은 송신기에서 참조 신호를 추가로 전송하므로 데이터 전송률이 절반으로 감소하는 문제점을 가지고 있다. 이러한 단점을 극복하기 위해 제안된 시스템의 송신기는 일반적인 D-TR (Differential-TR) 시스템과 같이 차동부호 방식을 사용한다. 또한, 제안된 D-ATR 시스템의 수신기는 일반적인 ATR 시스템과 유사하게 시스템의 비트오율 성능을 향상시키기 위해 수신된 참조 신호들을 재귀적으로 평균 취하여 자기상관에 사용되는 참조 템플릿의 신호대잡음비를 향상시킬 수 있는 구조로 설계된다. IEEE 802.15.4a UWB 다중경로 채널 모델에서 모의실험 결과, 제안된 D-ATR 시스템은 일반적인 D-TR 시스템에 비해 비트오율 성능이 크게 향상되는 것을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.40-47
• /
• 2003

This study was conducted to determine the sound paths and transmitted sound level in house. An air-conditioner system was selected a typical sound source. The measured transmission loss data shows that the apertures have an significant effect on the transmitted noise and comparable with the existing theoretical data. Therefore the complex aperture was substitute to quantitative apertures approximately. An effective simulation method, ray tracing and mirror image source method, was employed in the prediction of transmitted sound level. The measured results were efficiently reflected on the simulated results. So it is important that measuring the acoustic parameter prior to the prediction of the transmitted sound level in the house.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.201-207
• /
• 2011

In this paper, we focused on computing the higher-harmonic components of the transmitted wave passing over a submerged circular cylinder to show that it is causing a horizontal negative drift force. As numerical models, a circular cylinder held fixed under free surface in deep water is adopted. As the submergence of a circular cylinder decreases and the incident wavelength becomes longer, the higher-harmonic components of the transmitted wave starts to increase. An increase of the higher-harmonic components of the transmitted wave makes the horizontal drift force be negative. It is also found that the higher-harmonic amplitudes averaged over the transmitted wave region become larger with the increase of wave steepness and wavelength as well as the decrease of submergence depth.

• 소음진동
• /
• 제8권6호
• /
• pp.1137-1143
• /
• 1998

This paper describes the method to measure of the vibrational power transmitted from the vibration source to the supporting structure in the horizontal direction. Generally, it is impossible to measure horizontal forces at the coupling points. However. the vibrational Power transmitted in the horizontal direction can be measured by using indirect method that is based on the mechanical impedance and velocities at the coupling points. We proposed the method to estimate the vibrational power when the vibration source and supporting structure cannot be separated. In this paper. the vibrational power transmitted in the horizontal direction is also estimated by using this method. The estimated and measured results of the mobilities at the coupling point and vibrational power in the horizontal direction are compared. It is shown that the estimated results agree well with the measured results. For the supporting structure with multiple coupling points, the other coupling points should be considered for measuring the vibrational power transmitted through one coupling points. We examine the effects of other coupling points and measure the vibrational power without considering the other coupling points.

• 한국통신학회논문지
• /
• 제38A권3호
• /
• pp.289-293
• /
• 2013

광대역 통신을 위한 비동기 (noncoherent) 수신기인 CMSA (codeword matching and signal aggregation) 방식을 이용한 BCM (block coded modulation) 방식은 TR (transmitted reference) 방식보다 에너지 효율적인 방식으로 알려져 있다. 그러나, 프레임간 간섭/심볼간 간섭 (IFI/ISI : interframe interference/inter symbol interference)가 존재하는 채널 환경에서는 신호대 잡음비 (SNR : signal to noise ratio)가 증가하더라도, 수신 신호의 전력이 증가하는 것과 동시에 인접한 코드간의 간섭의 증가로 인하여 비트오율 (BER : bit error rate) 등과 같은 성능향상이 제한적으로 이루어진다. 제안하는 방식은 BCM의 부호 정합 (code matching) 대신에 TR 신호를 기반으로 블록 부호화된 기준틀 (block coded template)을 구성한 후, 수신신호에 상관기 (correlator)를 통과하여 송신신호를 추정하는 방식이다. 모의실험을 통하여 제안하는 방식이 BCM보다 우수한 성능을 확인할 수 있다.

• 지역사회간호학회지
• /
• 제28권4호
• /
• pp.431-439
• /
• 2017

Purpose: This study aims to examine the factors influencing sexually transmitted infection (STI) in Korean adolescents 12 to 18 years. Methods: Using statistics from 10-11th Korea Youth Risk Behavior Web-based Survey, secondary analysis was conducted. The study sample consisted of 4,886 boys and 1,998 girls who had reported initiating sexual intercourse. Results: The proportion of adolescents who had a sexually transmitted infection was 8.8% of boys and 11.0% of girls. In multiple regression analysis, grade, smoking, first intercourse before middle school, intercourse after drinking alcohol, living without family, large amounts of pocket money were factors associated with sexually transmitted infection for both boys and girls. Use of condom is related to STI contraction of boys only. Formal sex education was not associated with reducing risk of STI. Conclusion: The results of this study show the factors associated with STI among Korean adolescents. Gender-related effective interventions should be taken into consideration in school-based sex education programs.