• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.82-96
• /
• 2019

Objective: The aims of this study were to provide the basic data for establishing a precautionary management policy and to develop a methodology for selecting a radon management priority target area suitable for the Korean domestic environment. Methods: A suitable mapping method for the domestic environment was derived by conducting a quantitative comparison of predicted values and measured values that were calculated through implementation of two models such as IDW and RBF methods. And a qualitative comparison including the clarity of information transmission of the written radon map was carried out. Results: The predicted and measured values were obtained through the implementation of the spatial analysis models. The IDW method showed the lowest in the calculated mean square error and had a higher correlation coefficient than the other methods. As results of comparing the uncertainty using the jackknife concept and the concept of error distance for comparison of the differences according to the model interpolation method, the sum of the error distances showed a modest increase compared with the RBF method. As a result of qualitatively comparing the information transfer clarity between the radon maps prepared with the predicted values through the model implementation, it was found that the maps plotted using the predicted values by the implementation of the IDW method had greater clarity in terms of highness and lowness of radon concentration per area compared with the maps plotted by other methods. Conclusions: The radon management priority area suggests selecting a metropolitan city including an area with a high radon concentration.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.173-182
• /
• 2008

Promoting quality of streaming service in wireless networks has attracted intensive research over the years. Instable wireless channel condition causes high transmission delay and packet loss, due to fading and interference. Therefore, they lead to degrade quality of video streaming service. The IEEE 802.11 Working Group is currently working on a new standard called IEEE 802.11e to support quality of service in WLANs. And several schemes were proposed in order to guarantee QoS. However, they are not adaptable to network condition. Accordingly, they suffered video quality degradation, due to buffer overflow or packet loss. In this paper, to promote quality of video streaming service in WLANs, we propose a cross-layer architecture based on IEEE 802.11e EDCA model. Our cross-layer architecture provides differentiated transmission mechanism of IEEE 802.11e EDCA based on priority of MPEG-4 video frames and adaptively controls the transmission rate by dropping video frames through the efficient bandwidth estimation based on distinction of each AC. Through the simulation, proposed scheme is shown to be able to improve end-to-end qualify for video streaming service in WLANs.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.211-217
• /
• 2017

In this paper, we propose a bidirectional full duplex MAC (Medium Access Control) protocol for underwater acoustic networks. An underwater sensor node can set a back-off timer according to the priority of transmission. When the back-off timer expires, the underwater sensor node acquires a transmission opportunity. If a source node wants to send data to a destination node, it broadcasts RTS (Request-To-Send) including ID of the destination node to neighbor nodes. The destination node receiving RTS sends CTS (Clear-To-Send) to the source node to inform the bidirectional full duplex communication. After the source node receives CTS, the source node and the destination node can send the data to each other. In the underwater environment, the existing MAC protocol may take a lot of time for successful transmission of data due to long underwater propagation delay. On the other hand, the proposed bidirectional full duplex MAC protocol improves the throughput by shortening the time for successful transmission of data. In this paper, we analyze the throughput of the proposed bidirectional full duplex MAC protocol. In addition, we show that the proposed bidirectional full duplex MAC protocol has better performance in the presence of the long underwater propagation delay compared with existing MAC protocols for underwater environments.

• The Korean Journal of Archival Studies
• /
• no.42
• /
• pp.287-326
• /
• 2014

Documenting environmental conflicts will be a priority target for documenting localities, because those conflicts are critical events that make intensive 'place experiences' of local residents. This study is to design a narrative structure for documenting conflicts in the process of Transmission Towers Construction in Miryang. This study begins with analysing the characteristics of environmental conflicts, and draws a conflicts documentation model including basic rules, narrative structure and development process. Basic rules are set up as mixed documentation of memory and evidence, application of 'frame', and dynamic description. Based on the rules, this study suggests a dynamic and open narrative framework adopting the metadata model of ISO 23081. This model is applied to documenting Transmission Towers Construction Conflicts in Mi-ryang. The full narrative and 'frame' of the conflicts are set after analysing development and issues of the conflicts, stakeholder, and properties of each conflict problem. Records descriptions are related to the context(each event occurred in the conflicting conditions, mandates, and stakeholder) descriptions to make multiple narratives in digital environments. Event description contains elements for articulating the 'frame' of each party of the conflict. The merits of this model are; i) to accumulate the adequate context information systematically by adopting dynamic narrative model, and ii) to acquire the new items and connect them to related items easily and consistently through multi-entity description. This documentation model of environmental conflicts may support to shape the collective memory of community, and to achieve good governance by managing conflicts in the process of locating non-preferred facilities with due regard to values and perceptions of residents and communities.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1059-1075
• /
• 1997

The transprot layer protocol for distrubuted multimedia applications in high speed network should gurantee the Quality of Serivce(QoS)requested by uwer.,The QoS Parmenters can be divied into two calssifications:those depend on the speed of a network such as bandiwidth,end-to-end transmission delay and throughput;and net- woek independent parameters such as various typed of group communications, retransmission method based on multimeda characteristic,acceptable packet wrror rate and transmission priority.In this proposed protocol,we divided user's QoS into performance redated parmeters and non-performance related parameters.The perform- ance-related paramenters are mapped into ATM traddic paramenters by the Distributed QoS Manger(DQM),the QoS manager,and the non-performance redlted paramenters are supported by the Distributed Multimedia Trans-port protocol(DMTP),a high-performance group transport protocol.Especially,becaues the DMTP is designed with considering the IP protocol,it can be efficiently used as an underlying protocol not onlu in ATM,but also in Ethernet,Token ring and FDDI LAN.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.97-105
• /
• 2010

This paper proposes an effective medium access mechanism which is based on IEEE 802.11 to transmit an urgent message, The main features of the proposed mechanism are as follows. First, when it comes to channel access to have high priority, it has a shorter interval between frames than that specified in standard document. Second, we use fixed window size instead of back-off window with an exponential increase. Performance evaluation of proposed mechanism is executed by simulation and compare with the node using the specified mechanism in standard document. Performance evaluation results show that according to increasing competition the nodes using proposed method have less accessing time than the conventional methods. Also, the proposed method can improve processing time because of the decreasing transmission delay.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.585-590
• /
• 2002

In the typical data partitioning for error-resilient video coding, motion and macroblock header information is separated from the texture information. It can be an effective tool for the transmission of video over the error prone environment. For Intra-coded frames, however, the loss of DCT (discrete cosine transform) coefficients is fatal because there is no ther information to reconstruct the corrupted macroblocks by errors. For Inter-coded frames, when error occurs in DCT coefficients, the picture quality is degraded because all DCT coefficients are discarded in those packets. In this paper, we propose an efficient data partitioning and coding method for DCT-based error-resilient video. The quantized DCT coefficients are partitioned into the even-value approximation and the remainder parts. It is shown that the proposed algorithm provides a better quality of the high priority part than the conventional methods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.68-75
• /
• 2011

The performance of peripheral devices is improving rapidly to meet the needs of users for multimedia data. Therefore, the peripheral interface with wide bandwidth and high transmission rate becomes necessary to handle large amounts of data in real time for multiple high-performance devices. PCI Express is a fast serial interface with the use of packets that are compatible with previous PCI and PCI-X. In this paper, we design and verify general peripheral interface using serial link. It includes two kinds of traffic class (TC) labels which are mapped to virtual channels (VC). The design adopts TC/VC mapping and the scheme of arbitration by priority. The design uses a packet which can be transmitted through up to four transmission lanes. The design of general peripheral interface is described in Verilog HDL and verified using ModelSim. For FPGA verification, Xilinx ISE and SPARTAN XC3S400 are used.We used Synopsys Design Compiler as a synthesis tool and the used library was MagnaChip 0.35um technology.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.259-270
• /
• 2010

In this paper, a Location Information-based Gradient Routing (LIGR) algorithm is proposed for setting up routing path based on physical location information of sensor nodes in wireless ad-hoc networks. LIGR algorithm reduces the unnecessary data transmission time, route search time, and propagation delay time of packet by determining the transmission direction and search range through the gradient from the source node to sink node using the physical location information. In addition, the low battery nodes are supposed to have the second or third priority in case of forwarding node selection, which reduces the possibility of selecting the low battery nodes. As a result, the low battery node functions as host node rather than router in the wireless sensor networks. The LIGR protocol performed better than the Logical Grid Routing (LGR) protocol in the average receiving rate, delay time, the average residual energy, and the network processing ratio.

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.413-420
• /
• 2008

Network bandwidth is one of the major factors that impact the cost of a video service. In this paper we propose approaches to reducing the bandwidth requirement for transporting MPEG-4 video traffic over wireless LANs while guaranteeing a required level of quality of service(QoS). To support high quality video playbacks, video frames must be transported to the client prior to their playback times. A real-time transmission scheduling is used for this purpose, which transmits each frame assigned with a priority according to its importance. It addresses the challenge for a scheduling algorithm that efficiently handles the changing workloads of MPEG-4 video traffic. The goal of our research is to maximize the number of frames that are transported within their deadlines while minimizing the tardiness of frames that missed their deadlines. The performance of the proposed method is compared with that of similar service mechanisms through extensive simulation experiments.