• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.51-60
• /
• 2002

In this study we developed the visualization scheme of spatial ground-motion measurements in real time by using DSS data. Even though this scheme itself is useful for national earthquake mitigation plans, this scheme could be served as the crucial core for constructing rapid earthquake damage evaluation system. DSS is the abbreviation of Data Subscription Service and this is the pre-assigned request for the seismic stations to send very limited brief data with high priority and negligible transmission load. In addition to visualize the damage area with intensity, the corresponding epicenter can be estimated roughly for quick event alarm. For the interpolation of spatially irregular PGA data, the program, named as surface. of GMT was used with NetCDF grid file format. Since the grid file is similar to a postscript file, the program, called as shading, was coded with C language by using Matpak library in order to convert grid files into image files.

• Broadcasting and Media Magazine
• /
• v.11 no.1
• /
• pp.78-85
• /
• 2006

Cognitive radio is a paradigm for wireless communication in which either network of wireless node itself changes particular transmission or reception parameters to execute its tasks efficiently without interfering with the licensed users. This paper represents a performance of the cognitive radio technology on dual polarized MIMO system using six-port receiver. Six-port technology is well known direct conversion receiver. In this paper, a six-port phase discriminator based polarization signal separation is shown. That is, the SER(Symbol Error Rate) performance is improved using polarization separator and simple receiver architecture is proposed applying six-port receiver. The six-port technology has priority to adapt changeable frequency system and variable environments for cognitive radio. In general, dual polarized MIMO system has good capacity and quality using polarization separator [1].

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.74-81
• /
• 1997

Xcent-Net is a new system network designed to support a clustered SMP called SPAX(Scalable Parallel Architecture based on Xbar) that is being developed by ETRI. It is a duplicated hierarchical crossbar network to provide the connections among 16 clusters of 128 nodes. Xcent-Net is designed as a packet switched, virtual cut-through routed, point-to-point network. Variable length packets contain up to 64 bytes of data. The packets are transmitted via full duplexed, 32-bit wide channels using source synchronous transmission technique. Its plesiochronous clocking scheme eliminates the global clock distribution problem. Two level priority-based round-robin scheme is adopted to resolve the traffic congestion. Clear-to-send mechanism is used as a packet level flow control scheme. Most of functions are built in Xcent router, which is implemented as an ASIC. This paper describes the architecture and the functional features of Xcent-Net and discusses its implementation.

• Information and Communications Magazine
• /
• v.28 no.12
• /
• pp.50-60
• /
• 2011

Visible light communication(VLC) is one type of short-range, optical, and wireless communication system utilizing light emitting diode(LED) and laser diode(LD) as optical source. In a VLC system, visible light is used as a transmission medium and used to illuminate. Using VLC has a lot of advantages: it is harmless to human body; it transmits with high power, and it has excellent security, a high data rate, and a license free frequency band. With such a unique blend of communication and illumination in one system, the most common application would be an indoor environment. We aim at reviewing key issues in VLC network such as : FOV(field of view), priority MAC, cooperative MAC, link switching, LED-ID technique, cell site diversity, and link recovery.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.59-66
• /
• 2018

Data Distribution Service(DDS) provides the communications service programmers need to distribute time-critical data between embedded and/or enterprise devices or nodes. In this paper, I propose efficient methods for transmitting and receiving messages of various characteristics in real-time using DDS middleware. For high-frequency characteristic data, I describe several DDS packet types and various default and extended DDS QoS policies. In particular, the batching method is probably the best solution when considering several performance aspects. For large-capacity characteristic data. I will show a method using extended DDS QoS policies, a segmentation and reassembly method, and transmitting and receiving a large-capacity data with low priority method considering network conditions. Finally, I simulate and compare the result of performance for each methods. This results will help determine efficient methods for transmitting and receiving messages of various characteristics using DDS middleware.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.651-654
• /
• 2011

Wi-Fi 는 스마트 네트워크 환경 구현을 위한 기반 분야로 다양한 분야 및 서비스에 활용되고 있다. Wi-Fi 는 AP (Access Point)를 통해 보다 넓은 범위의 네트워크를 가능하게 하며, 여러 무선 단말기와 통신을 한다. 또한 Wi-Fi 는 DCF(Distributed Coordinate Function) 프로토콜을 이용하여 AP 를 포함한 모든 무선 단말기에게 공평하게 채널을 할당한다. 그러나 AP 는 채널을 요청하는 하위 단말기에 대해 도착한 순서에 따라 채널을 할당하는 FIFS(First In First Service) 스케줄링을 사용하여 데이터를 처리함으로써 데이터 전송 신뢰도를 저하시키고, 전송 지연이 발생하여 응급 데이터 전송에 적합하지 않다. 이에 본 논문에서는 응급 데이터 전송을 위한 우선순위 기반 AP 채널 할당 기법을 제안한다. 제안하는 기법은 전송하려는 데이터에 우선순위를 부여하여 응급 데이터의 채널 요청 처리율을 높이고 채널 할당 지연시간을 감소시켜 응급 데이터 전송 신뢰도를 향상시킨다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.758-760
• /
• 2012

The wireless sensor network is used to get information that location tracing or data of surrounding areas. Unnecessary retransmission request or many energy consumption because the transmission over the wireless links. In order to select the link of reliable and energy efficient to estimate the quality of radio link technique is required using RSSI, LQI, and so on. In this paper, each path between the sensor nodes, a small in the path within standard deviation of shall be determined the priority. Each path a high priority of the node values, respectively LQI is accumulated. Node can be selected the high LQI value path. Among them the less hop count to select the path is proposed. The proposed algorithm is removed the paths of shorten life using high the LQI value of the entire and high hop count even less variation. So its advantage that the sensor nodes can be selected more reliable path.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.40-47
• /
• 2015

This paper discusses QoS enhancement in the Best-effort services of the service plan provided by MPEG Media Transport (MMT) systems for video streaming applications. Among MMT services, i.e. per-flow, per-class, and best-effort services, the server does not provide guaranteed bandwidth for the best-effort service only. Therefore, in the best-effort services, a bandwidth access priority is defined for various services, where the lowest priority is assigned to the low-level video services. To alleviate the issue of bandwidth limitation in the best-effort services, this paper investigates transmission of low-resolution video with low bitrate and up-sampling. Our experimental results prove the superiority of the proposed method in terms of delivered video quality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.133-142
• /
• 2004

Recently, the growth of Internet and a variety of multimedia services through Internet increasingly demands high-speed packet transmission, the new routing function, and QoS guarantee on conventional routers. Thus, a new switching mechanical called the MPLS(Multi-Protocol Label Switching), was proposed by IETF(Internet Engineering Task Force) as a solution to meet these demands. In addition the deployment of MPLS network supporting Differentiated Services is required. In this paper, we propose the architecture of the MPLS switch supporting Differentiated Services in the MPLS-based network. The traffic conditioner consists of a classifier, a meter, and a marker. The VOQ-PHB module, which combines input Queue with each PHB queue, is implemented to utilize the resources efficiently. It employs the Priority-iSLIP scheduling algorithm to support high-speed switching. We have designed and verified the new and fast hardware architecture of VOQ-PHB and the traffic conditioner for QoS and high-speed switching using NS-2 simulator. In addition, the proposed architecture is modeled in VHDL, synthesized and verified by the VSS analyzer from SYNOPSYS. Finally, to justify the validity of the hardware architecture, the proposed architecture is placed and routed using Apollo tool.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.891-899
• /
• 2004

Ethernet passive optical network (EPON) has drawn many attention as a promising access network technology because it can provide a high bandwidth with a low cost. Since the uplink in the EPON system is shared by many users, it is necessary for an EPON system to have an efficient bandwidth allocation mechanism. In addition, as the users demand more QoS-oriented applications, it is necessary for an EPON system to have an efficient mechanism supporting QoS. In this paper, we propose a variable window dynamic bandwidth allocation (DBA) algorithm for the EPON system. Unlike the previously proposed DBA algorithms, the variable window algorithm guarantees the QoS for the highest priority class, and at the same time provides more enhanced QoS for the lower priority classes by dynamically allocating bandwidth if necessary. It is verified through the simulations that the variable window algorithm can provide more enhanced QoS performance than other DBA algorithms.