• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.881-893
• /
• 2000

An analytical synthesis technique for offset slider-rocker 4-bar linkages is devised where transmission angles are used as essential synthesis parameters. Finding the location where both the maximum and the minimum transmission angles arise leads to establishing the algorithm for limiting transmission angles of the slider-rocker linkage which has different offsets according to the direction of the slider. Position analysis by the algorithm gives formula for the dimensional synthesis for the linkage. Application to examples shows that the algorithm and the formula yield proper slider-rocker linkages with regard to limiting transmission angles to the maximum value.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.14-21
• /
• 1995

General Mechanical Structures have various and complex vibration transmission paths. In order to identify the mechanism of vibration transmission. The correct estimation of exciation forces and the exact modeling of transmission paths are required. In this paper, vector synthesis technique is employed to identify the characteristics of vibration input and it's transmission to body structure for the mounting system of a compressor in a refrigerator. Vibration reduction efficiency of each transmission path is evaluated by comparing individual vector components obtained before and after the paths from experimental research. The degree of effect is used to estimate the contribution of vibration input components to total output. And this paper presents a new technique based on simulation studies using vector synthesis dragram, by which the effects of change of the magnitude and phase of transmission paths can be predicted.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.246-250
• /
• 1996

In optical soliton transmission systems with nonlinear dispersive materials, which is utilized for ultra-long and high bit rate transmission, it is shown that the value of initial time difference between adjacent solitons is analyzed for optimum bit rate. The method is inducted by uncorrelation condition with minimum interaction forces in initial covariance coefficient between adjacent solitons. When the initial time difference is 6 times of soliton pulse width by the results, it is shown that the reliability is maintained with more than 90% within transmission length of soliton period. multiplied by 93.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.42-47
• /
• 2012

Construction equipment is heavily loaded during normal operation. In recent years, there is a trend that lower gear noise levels are demanded for drivers to avoid annoyance and fatigue during operation. For articulated hauler's final drive, meshing transmission error(T.E.) is the excitation that leads the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. This paper presents a method for the analysis of the tooth profile modification, and the prediction of transmission error under the loaded torques for the spur gear pair of the articulated hauler's final drive. And the transmission error, transmission error harmonics and contact stress are also calculated and compared before and after tooth modification under one torque. The simulation result shows that the transmission error and contact stress under the loads can be minimized by the appropriate tooth profile modification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.795-800
• /
• 2008

The sound transmission loss is a key index to evaluate the acoustic performance of a car-body structure at the high frequency range. From this paper, a new validation method for in-situ sound transmission loss is proposed. First, in-situ sound transmission loss is measured by using PU intensity probe on the condition of complete vehicle. Second, validation test, which is consisted of internal, external and total frequency response function test, is performed by using volume acceleration source and microphones. Then, these test results are compared to validate the accuracy of in-situ sound transmission loss. Finally, the test result of in-site method is compared with results of two reverberant room test method and SEA analytical method. The reliability of in-situ method is confirmed by these procedures.

• Tribology and Lubricants
• /
• v.17 no.1
• /
• pp.16-21
• /
• 2001

The wear particles is released from the moving surfaces in gear systems of transmission and its morphology is directly related to the damage and failure to gear system from which the particles originated. It is the effective method for damage condition estimation of automobile transmission gear to observe wear debris in gear oil. We tested with new transmission and took out gear oil according to driving distance. To be applied to damage condition of gear system in transmission of automobile,4 shape parameters of wear particles in gear oil were calculated and wear volume were presumed with the image processing system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.8
• /
• pp.843-852
• /
• 2006

Vibration/noise analysis as well as strength of planetary gear train are considered in order to develop a transmission for a high-speed ship. The vibration model of a gear pair is developed with considering the elastic deformation of the active teeth and the body to be a rigid. Excitation forces of the transmission system are considered as the mass unbalance of the rotors. misalignment and a function of gear transmission error which comes from the modified tooth surface. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors. misalignment and the transmitted errors of the gearing are considered shows that, at the operating speed, there are not the critical speed.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.77-82
• /
• 2010

This study has conducted numerical analysis for lubrication system of transmission for commercial vehicle. The lubrication oil system in transmission can be applied to a large scale commercial vehicle which is over 15tons. The flow rate of lubricating oil has been obtained for each of branch port from the lubrication pipe. The results from numerical simulation are mainly suggested for the mass flow rate of lubrication oil in the rotating main shaft of transmission system. It has been found that the mass flow rate from oil hole increased with an rotating rate of main shaft. The flow characteristic from oil hole has been presented for the lubricating system in the manual transmission.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.2
• /
• pp.7-20
• /
• 2007

TCU is a shift controller far automatic transmission of which major functions are to determine the shift point and manage the shifting process based on the various input signals. As the recent digital control technologies advance, it plays a key-role to improve a transmission performance and its algorithm becomes more complicated. This paper describes the development of transmission simulator fur wheel loader that enables a TCU for normal stand-alone operation by the real-time emulation of TCU interface signals. It can be utilized for the analysis of shift control algorithm implemented in a commercial TCU as well as for the development of brand new TCU.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.97-98
• /
• 2006

This study deals with the Transmission Error of gear tooth profile by modifying a Profile and lead of a surface of Tooth. First, we experimentally confirmed that the Transmission Error is a synthesis of the sliding Velocity between both gears. Since various types of Transmission errors appear in the experiments, we introduced definition of Transmission Error and The Optimism Design by modifying a surface parameters The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.