• Title/Summary/Keyword: transition region

Search Result 957, Processing Time 0.026 seconds

Impacts of Climate Change and Financial Support on Household Livelihoods: Evidence from the Northwest Sub-Region of Vietnam

  • DO, Thi Thu Hien;NGUYEN, Thi Lan Anh;NGUYEN, Thi Hoai Phuong
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.9 no.6
    • /
    • pp.115-126
    • /
    • 2022
  • The study's goal is to determine the amount of climate change's impact on ethnic minority (EM) households' livelihoods, as well as their adaptability to climate change and long-term viability. The research was conducted in Vietnam's Northwestern Sub-region, where ethnic minorities account for more than half of the overall population. The study uses a combination of qualitative and quantitative methods based on a survey of 480 households in 04 provinces severely affected by climate change in the Northwest sub-region of Vietnam. The results show that: climate change (extreme weather events) occurs with increasing frequency, mainly affecting the life expectancy, health, and capital of households; Vulnerable groups (women, ethnic minorities) have a poor adaptive capacity and mainly suffer the consequences of shocks, are afraid to change their livelihoods; Microfinance plays an important role in enhancing the sustainability of livelihoods through increasing capital and financial assets and reducing the vulnerability of ethnic minority households. Finally, research has some solutions for microfinance - special credit specifically for ethnic minority households in the Northwest Sub-region: support for microfinance advice, home credit with transition orientations to adapt to climate change response and relieves its impact on the social lives.

Characterization of 18S rDNA in Polygonatum spp. Collections (둥굴레속 식물의 18S rDNA 염기서열의 특성)

  • Yun, Jong-Sun;Kim, Ik-Hwan;Park, Jae-Seong;Lee, Cheol-Hee;Hong, Eui-Yon;Yun, Tae;Jong, Seung-Keun
    • Korean Journal of Medicinal Crop Science
    • /
    • v.14 no.3
    • /
    • pp.178-182
    • /
    • 2006
  • This study was conducted to investigate the variation in sequence, the base composition and the sequence similarity of 18S rDNA (18S ribosomal RNA coding region) in the 10 Polygonatum spp. collections. The entire 18S rDNA region of 10 Polygonatum spp. collections ranged from 913 bp to 914 bp. There were 8 variable sites in the entire 18S region, and they were attributable to nucleotide substitution and deletion. $T{\rightarrow}C$ transition happened in 4 sites, and $A{\rightarrow}G$ transition happened in 1 site. $C{\rightarrow}A$ transversion happened in 1 site, and deletion happened in 2 sites. Transition rates were five times that of transversion. Base compositions of 18S rDNA were $23.09{\sim}23.33%$ in adenine, $23.33{\sim}23.52%$ in guanine, $25.60{\sim}25.85%$ in thymine and $27.38{\sim}27.79%$ in cytosine. The A + T content of 18S rDNA of 10 Polygonatum spp. collections averages 48.99%, ranging from 48.80% to 49.18%, and the G + C content averages 51.01%, ranging from 50.82% to 51.20%. Pairwise sequence comparisons indicated that 18S rDNA sequence similarity ranged from 99.7% to 100%.

Design of CIC Interpolators with Improved Passband and Transition Region for Underwater Acousitc Communication (통과대역 및 전이영역 특성이 개선된 수중음파통신용 CIC 인터폴레이터 설계)

  • Kim, Sunhee
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.1
    • /
    • pp.660-665
    • /
    • 2018
  • Research into underwater wireless networks that enable the monitoring and controlling of the ocean environments has been continuing for disaster prevention and military proposes, as well as for the exploitation of ocean resources throughout the world. A research group led by Hoseo university has been studying a distributed underwater monitoring and controlling network. In this study, we developed an interpolator for acoustic communication between an underwater base station controller and underwater base station, which is included in this network. The underwater acoustic communication provided by this network defines four links whose sampling rates are different. Low power consumption is one of the most important requirements. Therefore, we adopted CIC interpolators, which are known to act as filters with a low power consumption, and some CIC interpolators with an appropriate changing rate were selected depending on the link. However, these interpolators have a large passband drop and wide transition region. To solve these problems, we added a compensator and half-band filter. After verifying the algorithm by using Matlab, we designed and verified it with Verilog-HDL in a ModelSim environment.

Wavelet-based Pitch Detector for 2.4 kbps Harmonic-CELP Coder (2.4 kbps 하모닉-CELP 코더를 위한 웨이블렛 피치 검출기)

  • 방상운;이인성;권오주
    • The Journal of the Acoustical Society of Korea
    • /
    • v.22 no.8
    • /
    • pp.717-726
    • /
    • 2003
  • This paper presents the methods that design the Wavelet-based pitch detector for 2,4 kbps Harmonic-CELP Coder, and that achieve the effective waveform interpolation by decision window shape of the transition region, Waveform interpolation coder operates by encoding one pitch-period-sized segment, a prototype segment, of speech for each frame, generate the smooth waveform interpolation between the prototype segments for voiced frame, But, harmonic synthesis of the prototype waveforms between previous frame and current frame occur not only waveform errors but also discontinuity at frame boundary on that case of pitch halving or doubling, In addtion, in transition region since waveform interpolation coder synthesizes the excitation waveform by using overlap-add with triangularity window, therefore, Harmonic-CELP fail to model the instantaneous increasing speech and synthesis waveform linearly increases, First of all, in order to detect the precise pitch period, we use the hybrid 1st pitch detector, and increse the precision by using 2nd ACF-pitch detector, Next, in order to modify excitation window, we detect the onset, offset of frame by GCI, As the result, pitch doubling is removed and pitch error rate is decreased 5.4% in comparison with ACF, and is decreased 2,66% in comparison with wavelet detector, MOS test improve 0.13 at transition region.

Electrochemical Characteristics of H Adsorption Sites at the Poly-Pt/LiOH Aqueous Electrolyte Interface (다결정 Pt/LiOH 수성 전해질 계면에서 수소 흡착부위의 전기화학적 특성)

  • Chun Jang Ho;Cho Chong Dug
    • Journal of the Korean Electrochemical Society
    • /
    • v.2 no.4
    • /
    • pp.213-217
    • /
    • 1999
  • The electrochemical characteristics of two distinct adsorption sites of H at the polycrystalline Pt/0.2 M LiOH aqueous electrolyte interface have been studied using the phase-shift method. At the forward and backward scans, the under-potentially deposited H (WD H) peak occurs on the cyclic voltammogram. The transition region on the phase-shift profile or the Langmuir adsorption isotherm occurs at ca. -0.66 to -0.96 V vs. SCE. At the transition region (ca. -0.66 to -0.96 V vs. SCE), the equilibrium constant (K) for H adsorption transits from 18.5 to $4.0\times10^{-5}$ and vice versa. Similarly, the standard free energy $({\Delta}G_{ads})$ of H adsorption transits from -7.2 to 25.1kJ/mol and vice versa. The under and over-potentially deposited H (UPD H and OPD H) on the poly-Pt surface act as two distinguishable electroadsorbed H species. An exothermic reaction occurs at the UPD H range. Both the UPD H peak and the transition region are attributed to the two distinct adsorption sites of the UPD H and OPD H on the poly-Pt surface.

The Local Measurements of Single Phase and Boiling Heat Transfer by Confined Planar Impinging Jets (평면충돌제트에 의한 단상 및 비등 열전달의 국소적 측정)

  • Wu, Seong-Je;Shin, Chang-Hwan;Cho, Hyung-Hee
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.28 no.8 s.227
    • /
    • pp.895-901
    • /
    • 2004
  • Single-phase convection and nucleate boiling heat transfer were locally investigated for confined planar water jets. The detailed distributions of the wall temperature and the convection coefficient as well as the typical boiling curves were discussed. The curve for the single-phase convection indicated the developing laminar boundary layer, accompanied by monotonic increase of the wall temperature in the stream direction. Boiling was initiated from the furthest downstream as heat flux increased. Heat transfer variation according to the streamwise location was reduced as heat flux increased enough to create the vigorous nucleate boiling. Velocity effects were considered for the confined free-surface jet. Higher velocity of the jet caused the boiling incipient to be delayed more. The transition to turbulence precipitated by the bubble-induced disturbance was obvious only for the highest velocity, which enabled the boiling incipient to start in the middle of the heated surface, rather than the furthest downstream as was the case of the moderate and low velocities. The temperature at offset line were somewhat tower than those at the centerline for single-phase convection and partial boiling, and these differences were reduced as the nucleate boiling developed. For the region prior to transition, the convection coefficient distributions were similar in both cases while the temperatures were somewhat lower in the submerged jet. For single-phase convection, transition was initiated at $x/W{\cong}2.5$ and completed soon for the submerged jet, but the onset of transition was retarded to the distance at $x/W{\cong}6$ for the fee-surface jet.

Stress Analysis of Expansion Transition Area in Steam Generator Tube of Optimized Power Reactor-1000 (한국표준형원전 증기발생기 전열관 확관부위의 응력해석)

  • Kim, Young Kyu;Song, Myung Ho;Yoo, One
    • Journal of Energy Engineering
    • /
    • v.22 no.2
    • /
    • pp.148-155
    • /
    • 2013
  • The steam generators of OPR-1000 plants have Alloy 600 and Alloy 690 as the tube material and its tube expansion method is the explosive expansion method. According to the experience of these plants, circumferential cracks were largely occurred in steam generator tubes expanded by the explosive expansion method and their locations were the outer surface of tube expansion transition region surrounding with piled-up sludge. But even though tubes have the same conditions, tubes with the hydraulic expansion method shows the prevail trend of axial cracks compared to circumferential cracks. Therefore in this study, in order to identify the difference of such phenomena as above, configurations of tube and tubesheet were modeled and at operating conditions, stress values applied in the tube expansion transition area in accordance with tube expansion methods were calculated by using computational program and the direction and the predominance of cracks were evaluated.

Temporal Variations of Dietary Habits in a High-Risk Area for Upper Gastrointestinal Cancers: a Population-Based Study from Northern Iran

  • Salamat, Faezeh;Semnani, Shahryar;Aboomardani, Maryam;Roshandel, Gholamreza
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.6
    • /
    • pp.2537-2542
    • /
    • 2015
  • Background: Nutrition transition is a global health problem, especially in developing countries. It is known as an important factor for development of different types of health conditions including cancers. Objectives: We aimed to assess the pattern of nutrition transition in a high-risk area for upper gastrointestinal cancers in Northern Iran during the last decade. Materials and Methods: This cross-sectional study was conducted on households of Golestan province, Iran. Data on household food consumption between 2001 and 2010 were obtained from the Statistical Center of Iran. The proportions of households with medium/high consumption of main foods were calculated for each year. Joint point software was used for assessing trends. Annual percent changes (APCs) and 95%CIs were calculated. Results: In total, 12,060 households were recruited. The APCs (95%CI) of the proportion of households medium/high consumption of cereals, vegetables, legumes, fish, dairy products and meats were -3.1 (-4.1 to -2.2), -2.9 (-3.8 to -2.1), -2.3 (-3.2 to -1.4), -2.8 (-3.3 to -2.4), -1.9 (-3.0 to -0.9) and 2.7 (1.2 to 4.3), respectively. Conclusions: We found significant increase in meat consumption among our population between 2001 and 2010. Our results also suggested significant decreasing trend in consumption of so-called healthy foods including, plant foods, fish, and dairy products. Regarding its correlation with health conditions including cancers, nutrition transition should be considered as a priority in health policy making in our region as well as other high-risk populations. It is recommended to conduct community level interventions to increase consumption of plant foods, fish, and dairy products.

The Global Distribution Direction of Defense Industry in Eastern Europe under the New Cooperation Strengthened (신 협력 강화에 따른 동유럽 방위산업의 국제유통방향)

  • Seo, Dae-Sung;Coo, Byung-Mo
    • Journal of Distribution Science
    • /
    • v.15 no.1
    • /
    • pp.83-93
    • /
    • 2017
  • Purpose - After the transition, the development of defense industry in Eastern Europe has been regressed. Recently, they have internationally recognized that new products have been exported and contributed to the Innovation-Based Manufacturing of national economy such as unmanned reconnaissance aircraft, water purification technology, and mobile chemical laboratory, etc. The military forces in Eastern Europe are re-armed by the localization of self-produced munitions in their own defense industry, and then emphasize fostering their own defense industry. Thus, if they make a collaboration with other nations as a industrial cluster, it will gain a competitive edge on the defense industry. Research design, data, and methodology - The study was designed with the data of each national defense department. The research of the subject was reviewed before and after the transition. Thousands of workers have worked in defense industries before the transition, however, the defense industry and experts left after the transition. The Hungarian defense spending on GDP also dropped sharply from 1.72% in 2000 to 0.85% in 2013. But, due to the crisis in Ukraine and the crisis of Syrian refugees, the Viségrad Group (V4) member countries have also increased their interest in a defense and industries as well as the confidence in the EU and NATO. Results - On the whole, the joint of military training and purchase of defense materials were found in order to form the EU cooperative combat troops in CEE. There are the implementation of a joint manual plan for strengthening V4 security policy and the joint military exercises for V4 every year, and the others are electronic warfare and innovation of V4 national forces. Through such a performance analysis methodology, we found that the defense industry is developed through the national cluster cooperation among CEEs and spreading global distribution. Conclusions - Eastern Europe and Balkan countries have been looking forward to cooperating with the non-EU countries such as Korea and other defense industries. There are a lot of potential development into a new civilian cooperation defense industry for global-distribution. Thus, Korea should develop electronic commercial applications, not just as a weapon exporting region.

Flow Control of Smart UAV Airfoil Using Synthetic Jet Part 2 : Flow control in Transition Mode Using Synthetic Jet (Synthetic jet을 이용한 스마트 무인기(SUAV) 유동제어 Part 2 : 천이 비행 모드에서 synthetic jet을 이용한 유동제어)

  • Kim, Min-Hee;Kim, Sang-Hoon;Kim, Woo-Re;Kim, Chong-Am;Kim, Yu-Shin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.12
    • /
    • pp.1184-1191
    • /
    • 2009
  • In order to reduce the download around the Smart UAV(SUAV) at Transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including the leading and trailing edge separation, and the large region of separated flow beneath the wing. Based on the results of part 1 of the present work, synthetic jet is located at 0.01c, $0.95c_{flap}$ and it is operated with the non-dimensional frequency of 0.5, 5 to control the leading edge and trailing edge separation. Consequently, download is substantially reduced compared to with no control case at transition mode using leading edge jet only. The present results show that the overall flight performance and stability of the SUAV can be remarkably improved by applying the active flow control strategy based on synthetic jet.