• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.447-451
• /
• 2009

Metropolitan rapid transit has been used by one of a main transport service for several decades, but there are no monitoring system for electrical equipment condition which can cause enormous economic loss and social problem if fault occurs. Recently, necessity of condition monitoring system for electrical equipment fault came to the fore, we became carrying out a research project for a design of electrical equipment lifetime estimation system for metropolitan rapid transit. In this paper, basic design result of condition monitoring system and specification of transformer partial discharge detection system are presented, which are part of entire lifetime estimation system. Definition of target apparatus and monitoring method determined by analysis of user requirement from each railway company and, each railway company's opinions and requests were collected sufficiently by surveys and discussion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.205-210
• /
• 2004

The PRT(Personal Rapid Transit) system has been being researched and examined to efficiently provide high quality services to passengers against the traffic congestion of the capital region. With concept that PRT differentiated from GRT(Group Rapid Transit), PRT generally is a tracked vehicle system operating with unmanned. The embedded software of PRT Automated Control system generally is comprised of the central software, stations software and vehicle software. The controllers of these software interface to each other using its RF communication antennas. In this paper, each embedded software of the PRT system should be applied to an incremental and systematic test approach technique in the design and implementation phase, because the reliability and safety of the PRT system should be assured

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1253-1258
• /
• 2004

A general idea of implementing and managing real-time control on the VDN for rail transit vehicles is presented. In particular, the virtual device network considered in this paper is composed of Ethernet as the data network and LonWorks network as the device (control) network. A LonWorks/IP web server was used as a gateway to realize peer to peer data communication on the virtual device networks. Experimental results are given to validate the suggested architecture.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.854-861
• /
• 2004

LRT(Light Rail Transit System) is devided into steel-wheel train, LIM and rubber tired AGT(Automated Guide-way Transit System) The main features of LRT are low construction cost, low space, low noise, Environment-friendly, fastly, low maintenance cost. it's a civil transit transfer system of new generation became popular advanced nation. In this study, the beginning designed manufactureing rubber tired AGT turnout and guide-way system for the field application. We hope reliability for the system shall home production of turnout and guide-way

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.152-154
• /
• 1998

This paper deals with propulsion system for the UTM-01(Urban Transit Maglev). We experiment about the LIM and the inverter at 4 running test maglev vehicle. It is measured voltage, current, power factor for inverter output. And we discussed about efficiency of the LIM about maglev system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.492-494
• /
• 1999

To improve safety operation of urban transit, compatible design of signaling system is most important factor at future train operation and management. Therefore, signaling system should be designed compatible transport demand of target year. In addition, signaling system should be designed improved train safety, based fail-safe principle. Most of all, to solve passenger concentration, high density and to improve efficiency of train operation. Headway improvement of train is most important. Train organization length of new urban transit as light rail is generally shorter than EMU. Therefore, to increase passenger service and operation efficiency, minimum headway of one minute in this system should be important required.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.542-547
• /
• 2003

This paper proposes the method to develop information system for maintenance of urban transit using wireless LAM. Wireless LAN communication provides very useful method to maintain urban transit vehicle. We will use wireless LAN to transmit driving data, operational data and trace data from vehicle to wayside. And also we will use wireless LAN to refer various information concerning to work in real time. Proposed method may prevent loss of maintenance manpower and provide effective maintenance process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.510-515
• /
• 2005

Since 1974, the first subway is constructed in Seoul metropolitan area, from 1985 country metropolitan subways have been built. But most country metropolitan subways cannot reach the goal of transportation sharing ratio and show a loss. In this paper, I investigate the issues of country metropolitan subways and present the methods to improve them focusing on strengthening transit network. At first, it is introduced that the method can complement incomplete network from insufficient subway lines. And I propose the consolidation method using KORAIL railway lines. Finally, the connecting method into subway missing area is presented with various transit systems like BRT, Guideway Bus and single railway line extension.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.915-920
• /
• 2005

Passenger safety is a primary concern of railway system but, it has been urgent issue that dozens of people are killed every year when they fall off from train platforms. Recently, advancements in IT have enabled applying vision sensors to railway environments, such as CCTV and various camera sensors. The objective of this work is to propose technical and system requirements for establishing intelligent monitoring system using camera equipments in urban transit system. We suppose the system is to determine automatically and in real-time whether anyone or anything is in monitoring area. To achieve the goal, we analyze recent image processing technologies for detection and recognition, and suggest possible direction of system development for applying urban transit system. According to the results, we expect the proposed system requirements will playa key role for establishing highly intelligent monitoring system in railway.