• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.689-693
• /
• 1997

This paper deals wth the impact and the transient analysis of the impact absorbing system consist of double damping. piston and sprlng system in spreader to increaas efficlcncy of it. It shows the optimum damping coefficient and spring constant under the limited stroku of Impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain reaction force as time. which is characteristic of dashpot and rubber. This system absorbed 11.5 and 88.5 % impact energq at the spring and the damper respectively.

• 한국유체기계학회 논문집
• /
• 제13권3호
• /
• pp.18-23
• /
• 2010

This paper predicts the unbalance and transient (start-up) response of a 5MW industrial gas turbine by using commercial rotordynamic tool, DYNAMICS 4.3. The gas turbine is operated at 12,975rpm on squeeze film dampers or tilting pad bearings. The stiffness and damping coefficients of the squeeze film dampers and tilting pad bearings are estimated. It is seen that the vibration amplitude of the gas turbine rotor is sufficiently small around the critical speeds and at the rated speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.85-89
• /
• 2001

The problem of the transient interaction of a plane acoustic shock wave which has an infinitely steep wave front with a cylindrical or spherical elastic shell has been studied analytically from early fifties based on the integral transform and series solution techniques. Huang adopted an inverse Laplace transform, and used a finite number of terms of the infinite series expansion of the equations for the shells. In the 1990s, the results have been used by many authors for validation of computer codes. The object of this paper is to discuss the interaction between a moving source and submerged spherical shells. Since the center of source is moving the first contact location between the waves and shell changes depending on the source velocity and distance. These are considered in the analysis. Furthermore, constant source strength and decreasing strength are considered in the analysis. Radial velocities at several locations on the structure are obtained and the results are discussed.

• International Journal of Automotive Technology
• /
• 제3권3호
• /
• pp.101-109
• /
• 2002

A time domain method for solving nonstationary random vibration caused by vehicle acceleration is first proposed in which a time changing model is established for representing nonstationary excitation of a rough road. Furthermore a novel frequency domain method called the transient power spectral density with spatial frequency (TPSD) is presented to obtain a response of vehicle system in frequency domain. This method has been proved to be valid by comparing numerical results with the exact solution.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.69-74
• /
• 2011

This paper deals with the detail rotordynamic analysis for the vertical rotor system as development of vertical sea water lift pump for FPSO deep well. In a vertical rotor system, since linearized stiffness and damping coefficients of fluid film bearing are no longer be valid, hence the transient response analysis considering a fluid film force for every journal position in the bearing needs to be required. In this study, the transient response analysis of the proposed vertical pump rotor system was carried out in dry-run and wet-run conditions, respectively. The results show that orbital vibration responses of the rotor system remain stable at rated speed and thereby operating reliability of the vertical rotor system is confirmed. To overcome complexity of calculation pr ocedure and time consuming calculation of transient analysis, the calculating technique of steady-state response analysis is also proposed. The results of steady-state response obtained by applying the proposed technique to the rotor system are good agreement with the reference results, that is, transient responses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.271-280
• /
• 2011

현재 교량구조물의 진동과 관련된 규정이나 시방지침이 미비한 상태여서 장경간 교량설계시 진동사용성에 대한 검토가 전혀 수행되지 않고 있다. 본 연구는 교량의 진동사용성 평가를 위해 Meister진동감각곡선을 이용하여 동일한 지간 및 도로폭을 가진 단경간 형식별 교량에 대해 해석적인 방법으로 평가를 실시하고자 한다. 구조해석 프로그램 MIDAS를 사용하여 각 교량의 거더는 프레임 요소로 하고 슬래브는 판요소로 모델링하여 설계 차량의 이동하중을 적용하여 시간이력해석을 수행하였다. 시간 이력해석에 의한 처짐 및 가속도 진폭을 Meister의 진동감각곡선을 이용하여 교량형식별 진동사용성을 비교 평가함으로써 장경간 교량의 설계단계에서 진동사용성을 검토할 수 있는 해석적 프로세스를 제시하였고 적절한 방법임을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.90-94
• /
• 2021

주거지에서의 정숙함에 대한 관심이 높아짐에 따라 구조물에서 발생하는 소음을 최소화할 필요가 있다. 중요한 소음원 중 하나는 엘리베이터 작동 소음이다. 엘리베이터는 층 사이에서 작동하며 인근 생활 공간에 상당히 성가신 소리를 생성한다. 입주민들에게 성가심을 유발하는 주요 소음원으로 인식되고 있다. 엘리베이터는 층간 이동을 위해 여러 위치에서 건물 구조에 지지되어 있다. 본 연구에서는 지지 위치에 폴리머 콘크리트를 사용하여 진동을 감소시키는 것을 실증하였다. 시멘트 콘크리트와 폴리머 콘크리트에 지지했을 때의 진동 발생량을 측정 및 비교하여 소음 저감 성능을 평가하였다. 폴리머 콘크리트는 승강로를 모방한 벽에 삽입되는 형태로 제작되었다. 브라켓에 충격진동을 인가하고 진동전달크기를 측정하였다. 감쇠비는 과도응답의 정규화 및 곡선맞춤을 통해 평가하였고, 각 레진 혼합 질량비에 대하여 비교하였다. 폴리머 콘크리트를 사용하여 구조적 강성에 대한 손실 없이 효과적인 방식으로 진동 발생을 감소시킬 수 있다.

• 항공우주시스템공학회지
• /
• 제7권2호
• /
• pp.55-59
• /
• 2013

Before avionics equipment are installed in aircraft, several environmental tests such as temperature, vibration, lightning, fire etc. must be conducted. One of the environmental tests is to substantiate protection designs of lightning indirect effect. It can be showed through RTCA DO-160G, section22 "Lightning Induced Transient Susceptibility" test. An additional test of aircraft level is required as well after installation of avionics equipment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.11-14
• /
• 2000

This paper presents the vibration control of a glass-fiber reinforced thermoplastic composite beam with a distributed PVDF sensor and piezo-ceramic achlator. The three types of different controllen which are PID, H$\infty$ , and p-synthesis ontrollcr are employed to achieve vibration suppression in the transient vibration of composite beam. In the H$\infty$ , controller design, 1st and 2nd natural frequencies are considered in the modeling, because robust control theory which has robustness to struchred uncertainty is adopled Lo suppress the vibration. If the controller designed by H$\infty$ , theory does not satisfy control performance, it is improved by $\mu$ -synthesis method with D-K iteration so that the$\mu$-contoller based on the structured singular value satisfies the nominal performance and robust performance Simulations and experiments were carried out with the designed controllers m order to demonstrate the suppression efficiency of each controller.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.658-664
• /
• 2012

This paper presents an investigation into driveline clonk noise of midi-bus. Test was performed for operational acceleration and pressure, torsional vibration of driveline and FRF to TPA. Wavelet analysis was used to study spectral-time characteristics to all measurement data and specially for torsional vibration, lash analysis was carried out. To investigate the path of the clonk in detail, time domain TPA was introduced. With time domain TPA, the contribution of each path for the clonk was estimated by both subjectively and objectively. As a result, Transmission mount part was came to light as the main contributor of issued clonk. This was verified by reinforcing the bracket of transmission side. And 1D torsional nvh performance simulation model was built with measured torsional vibration. The simulation tool was used for prediction of some clonk behavior in tip in-out transient condition.