• Journal of Pharmaceutical Investigation
• /
• 제35권5호
• /
• pp.333-336
• /
• 2005

The objective of this study was to investigate the stability of tetracycline HCl on encapsulation into and inside reverse micelles. To do so, tetracycline HCl was first mixed with cetyltrimethylammonium bromide, water and ethyl formate to make reverse micelles. The degradation kinetics of tetracycline HCl inside the reverse micelles was then assessed by scrutinizing its stability data. Under our experimental conditions, the reverse micelles formed spontaneously in absence of any mixing devices. During the preparation of the reverse micelles, however, considerable portions of tetracycline HCl underwent a chemical reaction (e.g., epimerization). For instance, $51.4{\pm}0.6%$ of an initial concentration of tetracycline HCl was transformed into a degradation product. Once dissolved inside the reverse micelles, the degradation of tetracycline HCl followed an exponential decay pattern. The plot of log{the degradation rate of tetracycline HCl} versus log{tetracycline HCl concentration} made it possible to determine the order of degradation reaction and rate constant. It was proven that the degradation of tetracycline HCl inside the reverse micelles followed a first order kinetics with a rate constant of 0.0027 $hour^{-1}$. Meriting further investigation might be formulation studies to stabilize tetracycline HCl on encapsulation into and inside the reverse micelles.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권4호
• /
• pp.440-448
• /
• 2006

자기 조직화 신경망 (SOM: Self-Organizing Map)은 자율 학습 신경망으로 사전 지식이 존재하지 않는 자료에 존재하는 구조적 관계성을 보전하는데 이용된다. 자기 조직화 신경망은 벡터 양자화, 조합 최적화, 패턴 인식과 같은 복잡한 문제 해결을 위한 연구에 많이 이용되어 왔다. 이 논문에서는 좀더 효율적인 유전 알고리즘을 얻기 위한 스키마 변환 도구로서 자기 조직화 신경망을 이용하는 새로운 사용법에 대해서 제안한다. 즉, 각 자식해는 탐색 공간에서 좀더 바람직한 모양을 가지는 동질의 인공 신경망으로 변환된다. 이 변환으로 인해 강한 상위(epistasis)를 가지는 유전자들은 염색체 상에서 서로 인접하게 되는 것이다. 실험 결과는 기존 결과에 비해서 주목할만한 성능 개선이 있음을 보여준다.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.78-84
• /
• 2009

The purpose of this study was to compare gait patterns during pregnancy. Because of the changes in hormone levels and anatomical changes such as body mass, body-mass distribution, joint laxity, and musculotendinous strength that result from pregnancy, it was possible that there would be certain gait deviations associated with these changes. Three-dimensional gait analyses were performed from a self-selected pace, and six subjects(height : $163{\pm}5.3cm$, mass : $61.3{\pm}3.80kg$, $65.3{\pm}5.14kg$, $70.2{\pm}4.98kg$) participated in the three times(the early, middle and last years). 7 cameras(Proreflex MCU-240, Qualisys) and 2 force plates (Type 9286AA, Kistler) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D and Joint moments computed using inverse dynamics. In conclusion, pregnant women's gait patterns were changed during pregnancy period because pregnancy makes them physical changes. The main changes were joint moments and kinematic factors during pregnancy period. The pregnancy transformed normal gait pattern Into toe out position. Therefore, exercise programs to improve muscle activity were necessary where joint moments were small. The development of simulator should be studied for pregnant women's tailored shoes and accessories in future.

• 한국주거학회논문집
• /
• 제24권6호
• /
• pp.51-59
• /
• 2013

The ritual for community is a group ritual performed by the regional community of a village for the safety of the residents and abundant harvests. However, many ritual places have been destroyed by the anti-superstition movement, New Community Movement (Saemaul Movement), industrialization and urbanization since the 1960s. Under the circumstances, this study researched the status of use of the ritual place in Beommul-dong in Daegu where the ritual was revived in 2004 after having been suspended since the end of the 1980s due to urbanization. The revival of the ritual for community in Beommul-dong in Daegu, which had been maintained by the village people alone, is the prime example of the vitalization of local community as the recreation of local community, since the ritual has been transformed into a kind of festival involved with and financed by the local government. The study on analyzing the usage pattern of the ritual place may provide useful sources to come up with the modernized functions of the ritual place as a community place, where the heads of the ward office and cultural center, lawmakers and most of the residents perform the ritual, share foods and tread on the God of the Earth across the village at 11:30 in the morning on every January 16 of the lunar calendar.

• 대한치과기공학회지
• /
• 제31권3호
• /
• pp.9-14
• /
• 2009

This study evaluated the mechanical properties of Ti-Cu alloys with the hope of developing an alloy for dental casting with better mechanical properties than unalloyed titanium. Ti-Cu alloys with four concentrations of Cu(2,5,10wt%) were made in an argon-arc melting furnace. The microstructure and micro-Vickers hardness were determined. X-ray diffraction pattern test was performed on the polished specimens. The microstructure of 2%Cu and 5%Cu alloys are shown acicular ${\alpha}Ti$ phase formed on the surfaces of previously formed $\beta$grains. The 10%Cu alloys has essentially a eutectoid structure; this structure includes lamella of ${\alpha}Ti$ and $Ti_2Cu$ phase that transformed from ${\alpha}Ti$ at the eutectoid temperature. The micro-Vickers hardness of CP Ti specimens was significantly(p<0.05) lower than that of any of the other alloys. Among the Ti-Cu alloys, the 10%Cu alloys exhibited a significantly(p<0.05) higher hardness value. but lower than that of Ti-6%Al-4%V alloy. From these results, it was concluded that new alloys for dental castings should be designed as Ti-Cu based alloys if other properties necessary for dental castings were obtained.

• Journal of Construction Engineering and Project Management
• /
• 제1권2호
• /
• pp.43-48
• /
• 2011

In many parts of the world, low cost housing used to be built and maintained by the governments, based on designs and detail specifications prepared by the public sector with construction carried out by contractors. Results vary due to differences in design standards, workmanship and property management, depending also on the neighbourhood's care of the estates and their pattern of usage. In the UK, where Private Finance Initiative (PFI) has been used for infrastructure projects, there have been successful cases of city estate being transformed by PFI. These PFI housing schemes involve new-build, refurbishment as well as facility management. Unlike traditional construction, which is based on prescriptive specifications, PFI housing is based on output specifications. A study has been undertaken to compare the two specification approaches as they are applied to housing estate. Results are enlightening and serve as good reference to cities such as Hong Kong SAR and Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.195-201
• /
• 1992

It had been studied the structure and the magnetic properties of singel phase Co2Y(Ba2Co2Fe12O22) powder, one of the hexagonal ferrite. The material was successfully prepared by a commercially applicable coprecipitation method. Adding asqueous solution of BaCl2, CoCl2 and FeCl2(Ba2+:Co2+:Fe2+=1:1:6 in mole ratio) to a mixture of NaOH and hydrogen peroxide solution, coprecipitate was formed with rapid oxidation of ferrous to ferric ion. The coprecipitate transformed to single phase Co2Y powder at heat treatment temperatures as low as 900$^{\circ}C$. The shape of Co2Y particles obtained at 900$^{\circ}C$ was hexagonal plate-like (diameter∼$\mu\textrm{m}$, aspect ratio>10). The structure of the Co2Y was refined by a Rietveld analysis of the measured X-ray diffractogram. The lattice parameters are ao=5.8602${\AA}$ and co=43.512${\AA}$. Co2Y is a soft magnetic material with saturation magnetization 30 emu/g and coecivity 170 . A standard X-ray diffraction pattern for Co2Y is proposed as well.

• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.32-43
• /
• 1999

본 논문에서는 QMSA에 전기력선의 제한이 없도록 용량을 장하한 변형된 QMSA를 설계했다. 설계.제작 된 안테나는 2.0 GHz의 중심 주파수에서 5.7 %의 대역폭을 갖고 임의의 급전점 변화에 따라 대역폭과 공진 주파수의 변화를 보였다. 용량을 장하하기 위한 좌. 우측 평행 평판사이 넓은 스롯폭의 크기는 매우 넓은 대역폭을 갖기 때문에 광대역 통신 시스템에 응용휠 수 있다. 설계된 안테나의 방사 패턴 특성은 다이폴 구조와 개구연 구조 해석법을 기초로 하였다. 계산 결과, 상대적인 후방 방사는 -5dB 정도였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.74-77
• /
• 2000

Since the opening of the mobile telecommunications market to new entrants in 1996, the mobile telecommunications industry in Korea has transformed into a severely competitive market. Although there are numerous methods to evaluate the effects of the competition policy, the most relevant would be to measure the decreased degree of mobile service tariff. Also, after the Introduction of competition in the market, most carriers launched a variety of new tariff plans, which would satisfy the users′ traffic volume and pattern. Therefore, it is necessary to develop a "mobile tariff index" that would collectively consider all the various tariff plans. This paper aims to develop a mobile tariff Index that would accommodate all the various tariff plans provided by mobile carriers. To develop this mobile tariff index, mobile user′s will first be classified by their traffic volume, and then calculate the average tariffs per minute of each group of users, and lastly weight-average those tariffs per minute. And finally, this paper shows the mobile tariff index by considering those averaged tariffs and the carriers′ market shares to reflect the contribution of individual carriers and the users′ traffic volume.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.128-137
• /
• 2000

A range of suede-like samples were collected including woven fabric type, nonwoven fabric type, and natural suede(sheep). The surface textures of these suede-like fabrics are rather diverse and different from the plain filament type fabrics since there are a lot of fine surface free fiber ends. Physical and mechanical measurements were carried using the KES equipments. Based on the Kawabata-Niwa translational equation, primary hand values and THV were calculated. Uniaxial tensile tests were performed. Using glossmeter, the reflectance pattern was analyzed at different incidence and receiving angles. In order to capture the surface images of the specimens, a CCD camera and frame grabber connected to a PC were employed. The reflectance uniformity of the images was measured with line-profile analysis and standard deviation values of the profile of the images were calculated. After the multiscale wavelet transfermation, correlation among the transformed image was analyzed at each scale. The reflectance uniformity of the natural suede was better than that of nonwoven type suede, while that of woven type suede was the last among the selected three samples(natural suede, nonwoven type, woven type). The correlation analysis among images has shown the possibility of using the wavelet transformation of the images as one of the measures to detect similarities among the textured specimens.