• The Journal of the Acoustical Society of Korea
• /
• 제20권1E호
• /
• pp.20-24
• /
• 2001

We propose the computation reduction method of real root method that is mainly used in the CELP(Code Excited Linear Prediction) vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSF[1]. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. But, the important characteristic of LSF is that most of coefficients are occurred in specific frequency region. So, the searching frequency region is ordered by each coefficient's distribution. And coefficients are searched in ordered frequency region. Transformation time can be reduced by this method than the sequential searching method in frequency region. When we compare this proposed method with the conventional real root method, the experimental result is that the searching time was reduced about 46% in average.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.78-88
• /
• 1989

The fundamental objective of this paper has been to develop a means for incoporating the concept of the linear fractional transformation more generally and easily into multivariable feedback design procedure. When we design a continuous system, generally, we are constrained by design methods which arise specifically for the system. Also, in the design of descrete systems, it is the same concept. But the approach developed in this paper is very flexible in the view that in spite of being the continuous or discrete, the design can be done using a well known design method in both cases. That is, when we design a contnuous system or discrete system, the design can be done by a standard design method of continuous systmes or discrete ones, depending on the choice of the linear fractional transformation. Therefore, it is noted that this concept has broken the unflexibility of the conventional design rules for multivariable control system. In essence, the concept shows that if a given system is controllable, some desirable design, for examples, pole assignment within prespecified region, optimal controllers with poles within prespecified region etc., could be done easily by transforming a desirable region into a standard region, such as the complex left-half plane or the unit disk, by the chosen linear fractional transformation, and then by designing the transformed system using the well known standard results.

• Journal of Plant Biotechnology
• /
• 제46권4호
• /
• pp.323-330
• /
• 2019

The high expression level of industrial and metabolically important proteins in plants can be achieved by plastid transformation. The CaIA vector, a Capsicum-specific vector harboring aadA (spectinomycin resistance), is a selectable marker controlled by the PsbA promoter, and the terminator is flanked by the trnA and trnI regions of the inverted repeat (IR) region of the plastid. The CaIA vector can introduce foreign genes into the IR region of the plastid genome. The biolistic method was used for chloroplast transformation in Scoparia dulcis with leaf explants followed by antibiotic selection on regeneration medium. Transplastomes were successfully screened, and the transformation efficiency of 3 transgenic lines from 25 bombarded leaf explants was determined. Transplastomic lines were evaluated by PCR and Southern blotting for the confirmation of aadA insertion and its integration into the chloroplast genome. Seeds collected from transplastomes were analyzed on spectinomycin medium with wild types to determine genetic stability. The increased chloroplast transformation efficiency (3 transplastomic lines from 25 bombarded explants) would be useful for expressing therapeutically and industrially important genes in Scoparia dulcis L.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제2권2호
• /
• pp.83-95
• /
• 1990

It can be assumed that the ocean waves consist of many independent pure sinusoidal components which progress in arbitrary directions. To analyze irregular sea waves, both the spectrum method and the individual wave method have been used. The spectral approach is valid in the region where the water depth is deep and the linear property of velocity distribution is predominent, while the individual wave analysis method in the region where the water depth is shallow and the wave nonlinearity is significant. Therefore, to investigate the irregular wave transformation from the deep water to the shallow water region, it is necessary to relate the frequency spectrum which is estimated by the spectrum analysis method to the i oint probability distribution of wave height, period and direction affected by the boundary condition of the individual wave analysis method. It also becomes important to define the region where both methods can be applied. This study is a part of investigation to establish a systematic approach for analyzing the irregular wave transformation. The region where the spectral approach can be applied is discussed by earring out the experiments on the irregular wave transformation in the two-dimensional wave tank together with the numerical simulation. The applicability of the individual wave analysis method for predicting irregular wave transformation including wave shoaling and breaking and the relation between frequency spectrum and joint probability distribution of wave height and period are also investigated through the laboratory experiment and numerical simualtion.

• Journal of the Korean Ceramic Society
• /
• 제33권4호
• /
• pp.448-454
• /
• 1996

The microstructural evolution of BaTiO3 ceramics during cubic-hexagonal phase transformation was investiga-ted. In the case of phase transformation from cubic to hexagonal BaTiO3 the hexagonal phase nucleated at the surface region of specimen. On the other hand in the case of that from hexgonal phase to cubic, cubic phase was initiated at the center region of specimen. And fast grain growth and irregular grain boundary shape could be also observed during these transformation processes. Besides low densified hexagonal BaTiO3 specimen was made with low forming pressure. The phase transformation of these specimens toward cubic phase was relatively retarded comparing with dense hexagonal BaTiO3 specimens. was made low forming pressure.. The phase transformation of these specimens toward cubic phase was relatively retarded comparing with dense hexagonal BaTiO3 specimens. These results were explained that hexagonal BaTiO3 had lowder surface energy than cubic phase.

• Journal of Powder Materials
• /
• 제10권2호
• /
• pp.118-122
• /
• 2003

Alpha-SiAlON ceramics having various compositions and modifying cations were investigated with respect to their phase stability, transformation kinetics. and resulting microstructures. Each composition was heat treated at 150$0^{\circ}C$ for 1h and measured the $\alpha$-SiAlON transformation. The phase-boundary composition in the single-phase $\alpha$-SiAlON region showed sluggish transformation from $\alpha$-$Si_3N_4$ to $\alpha$-SiAlON compared to the phase-center composition in the diagram. Using the different rare earth modifying cations, dependence of transformation kinetics on the phase stability in a fixed composition was also explained. By changing size of the stable u-phase region with exchanging cations, systematic change in transformation was observed. Transformation rate of $\alpha$-SiAlON at low temperature has an important role on controlling the final microstructure. Less transformation gives more chances to develop elongated grain in the microstructure.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.186-188
• /
• 2005

Hand region detection in images is an important process in many computer vision applications. It is a process that usually starts at a pixel-level, and that involves a pre-process of color space transformation followed by a classification process. A color space transformation is assumed to increase separability between skin classes for hands and non-skin classes for other parts, to increase similarity among different skin tones, and to bring a robust performance under varying illumination conditions, without any sound reasonings. In this work, we examine if the color space transformation does bring those benefits to the problem of hand region detection on a dataset of images with different hand postures, backgrounds, people, and illuminations. Results indicate that best of the color space is the normalized RGB.

• Journal of the Korean Society of Safety
• /
• 제11권4호
• /
• pp.49-53
• /
• 1996

Corona discharges in air insulated electric power systems cause power loss, produce interfering electromagnetic radiation, and can indicate incipient failure. An understanding of corona discharges in air gap is clearly Important. The Wavelet transformation is an extended method of fourier transformation. The fourier method is a powerful tool for signal analysis, but it can't include information for time. However the wavelet transformation analysis can include on the information of time and frequencies at the same time. In this paper we apply the wavelet transformation to the corona signals in needle-plane air gap for the purpose of analysis of developing aspects of corona discharges. We analyzed the developing aspects of corona discharges, namely, corona discharge current, repetition rates, width of Pulse distribution region, pulseless region and frequencies distribution of corona discharge pulses.

• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.46-52
• /
• 2003

The refinement of microstructure and phase transformation near the interface of pure copper/carbon steel dissimilar metals joints with various friction welding parameters have been studied in this paper. The microstructure of copper and carbon steel joints were changed to be a finer grain compared to those of the base metals due to the frictional heat and plastic deformation. The microstructure of copper side experienced wide range of deformed region from the weld interface and divided into very fine equaxied grains and elongated grains. Especially, the microstructures near the interface on carbon steel were transformed from ferrite and pearlite dual structure to fine ferrite, grain boundary pearlite and martensite due to the welding thermal cycle and rapid cooling rate after welding. These microstructures were varied with each friction welding parameters. The recrystallization on copper side is reason for softening in copper side and martensite transformation could explain the remarkable hardening region in carbon steel side.

• Journal of Korea Multimedia Society
• /
• 제17권7호
• /
• pp.806-817
• /
• 2014

The extraction of lip region is essential to Lip Reading, which is a field of image processing to get some meaningful information by the analysis of lip movement from human face image. Many conventional methods to extract lip region are proposed. One is getting the position of lip by using geometric face structure. The other discriminates lip and skin regions by using color information only. The former is more complex than the latter, however it can analyze black and white image also. The latter is very simple compared to the former, however it is very difficult to discriminate lip and skin regions because of close similarity between these two regions. And also, the accuracy is relatively low compared to the former. Conventional analysis of color coordinate systems are mostly based on specific extraction scheme for lip regions rather than coordinate system itself. In this paper, the method for selection of effective color coordinate system and chromaticity transformation to discriminate these two lip and skin region are proposed.