• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.43-52
• /
• 1996

This paper describes interactive computer procedures for design the forming sequences in cold forging. This system is implemented on the personal computer and its environment is a commercial AutoCAD system. The programming language. AutoLISP, was used for the configuration of the system. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the part is a key in process planning. To recognize the part section geometry, the section entity representation, the section coordinate-redius representation and the section primitive geometru were adopted. This system includes six major modules such as input module, forging design module, forming sequence design module, die design module, FEM verification module and output module which are used independently or in all. The sequence drawing wigh all dimensions, which includes the dimensional tolerances and the proper sequence of operations, can generate under the environment of AutoCAD. The acceptable forming sequences can be verified further, using the FE simulation.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.237-240
• /
• 2002

We have studied a RF energy transformation. In this paper, we introduced proximity sensor using RF energy transformation. We used 125kHz RF signal as carrier frequency and BPSK circuit, PNP proximity sensor and designed circuit to transmit to the reader through the antenna with data which sensor had acquired. Micro-controller, oscillator, power amp, FSK Modulation module are included in the circuit. Max 323 chip is applied to analog switch and used to HYP-30R10NA sensor chip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.37-41
• /
• 2007

Fast Fourier Transformation(FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Excitation is a factor or process making noise or vibration. It's typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system by frequency analysis. There are harmonic excitation, impact excitation, random excitation, sweep excitation, chirp excitation and so on as the ideal method in an experiment using exciter. In this thesis, excitation testing module for NI-PXI equipment is developed. The analyzing module is developed with LabVIEW tool. A user can generate each waveform for shaking a structure and see quickly and easily modal shape of system with this module. This developed module will be expected to build up more convenient and serviceable measurement system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1430-1434
• /
• 2004

Recently, Virtual reality parts is applied in various fields of industry. In this paper we developed basic components for virtual robot control system interfaced with real environment. For this, a real robot with virtual interface module is developed and virtual robot of similar image with real robot is created by putting on 3D graphic texture to the real robot. To build an unknown environment to be linked with virtual environment, we proposed a hough transformation based algorithm. Our proposed algorithm consists of navigation module by using fuzzy engine and map building module. Experiments using a developed robot illustrate the method.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.12-23
• /
• 1994

This paper proposes an optimal design software for the open-chain dynamic systems whose governing equations are expressed as differential equation. In this software, an input module and an automatic creation module of the equation of motion are developed to contrive the user's convenience. To analyze the equation of motion of the dynamic systems, variable-order and variable-stepsize Adams-Bashforth-Moulton predictor-corrector method is used to improve the efficiency. For the optimization and the design sensitivity analysis, ALM(augmented lagrange multiplier)method and adjoint variable method are adopted respectively. An output module with which the user can compare and investigate the analysis and the optimization results through tables and graphs is also provided. The developed software is applied to three typical dynamic response optimization problems, and the results compare very well with those available in the literature, demonstrating its effectiveness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1992년도 춘계학술대회 논문집 92
• /
• pp.131-158
• /
• 1992

Verification, calibration, and compensation are becoming more essential elements for manufacture and maintenance of high performance CMMs. A computer module of volumetric error generation has been developed to calculate volumetric errors (random as well as systematic) from measured parametric errors, accepting most types of CMMs in current use. New transformation rules have been derived to transform all the parametric errors with respect to the origin of working volume considered, then incorporated, then incorporated into the module of error calculation. Two cases of practical CMMs are tested with the developed module, and showed good performance.

• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.236-241
• /
• 2015

본 논문에서는 로봇 간의 결합과 허리 관절을 이용하여 변형 가능한 다 개체 4족 로봇 플랫폼을 제안하였다. 메카넘 휠을 적용하여 다양한 각도로 주행이 가능하고, 주행으로는 이동할 수 없는 환경을 극복하기 위해 보행도 가능한 복합 이동형 로봇으로 설계하였다. 주행 및 보행을 구현하기 위해 2가지의 기구학을 사용하였으며, 보행은 일정한 패턴을 생성하여 구현하였다. 로봇의 전면부와 후면부에는 결합 모듈을 장착하였고, 두 로봇 간의 결합을 위해 결합 알고리즘을 제시하고 실험하였다. 변형을 위해 로봇의 몸 중간에 허리 관절을 적용하였고, 허리 관절을 이용한 변형을 통해 물건을 옮길 수 있는 새로운 기능을 구현하였다.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1479-1484
• /
• 2005

본 논문은 이동로봇을 위한 위치 및 물체인식용 지능형 센서 제어 시스템에 대해 기술한다. 개발된 센서시스템은 저가의 광 PSD(Position sensitive detector)를 사용하였다. PSD센서는 저가이고, 가볍다는 장점이 있지만 많은 noise를 갖고 있다. 본 논문에서는 이러한 noise를 효과적으로 제거하기 위해 hardware filter와 software filter를 제안한다. 또한 선분기반 map building을 위해 개선된 Hough transform 알고리즘과 이동로봇의 실내 환경에서의 navigation 알고리즘을 제안한다. 개발된 시스템은 실험을 통해 증명하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.285-286
• /
• 2006

The essential tasks to operate the welding robot are the acquisition of the position and/or shape of the parent metal. For the seam tracking or the robot automation, many kinds of contact and non-contact sensors are used. Recently, the vision sensor is most popular. In this paper, the development of the system which measures the profile of the welding part is described. The total system will be assembled into a compact module which can be attached to the head of welding robot system. This system uses the line-type structured laser diode and the vision sensor It implemented Direct Linear Transformation (DLT) for the camera calibration as well as radial distortion correction. The three dimensional shape of the parent metal is obtained after simple linear transformation and therefore, the system operates in real time. Some experiments are carried out to evaluate the performance of the developed system.