• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.276-284
• /
• 2000

Usual practice of the transformation of a B-spline curve into a set of piecewise polynomial curves in a power form is done by either a knot refinement followed by basis conversions or applying a Taylor expansion on the B-spline curve for each knot span. Presented in this paper is a new algorithm, called a direct expansion algorithm, for the problem. The algorithm first locates the coefficients of all the linear terms that make up the basis functions in a knot span, and then the algorithm directly obtains the power form representation of basis functions by expanding the summation of products of appropriate linear terms. Then, a polynomial segment of a knot span can be easily obtained by the summation of products of the basis functions within the knot span with corresponding control points. Repeating this operation for each knot span, all of the polynomials of the B-spline curve can be transformed into a power form. The algorithm has been applied to both static and dynamic curves. It turns out that the proposed algorithm outperforms the existing algorithms for the conversion for both types of curves. Especially, the proposed algorithm shows significantly fast performance for the dynamic curves.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권9호
• /
• pp.1341-1350
• /
• 2009

Dietary lipids are rapidly hydrolysed and biohydrogenated in the rumen resulting in meat and milk characterised by a high content of saturated fatty acids and low polyunsaturated fatty acids (PUFA), which contributes to increases in the risk of diseases including cardiovascular disease and cancer. There has been considerable interest in altering the fatty acid composition of ruminant products with the overall aim of improving the long-term health of consumers. Metabolism of dietary lipids in the rumen (lipolysis and biohydrogenation) is a major critical control point in determining the fatty acid composition of ruminant lipids. Our understanding of the pathways involved and metabolically important intermediates has advanced considerably in recent years. Advances in molecular microbial technology based on 16S rRNA genes have helped to further advance our knowledge of the key organisms responsible for ruminal lipid transformation. Attention has focused on ruminal biohydrogenation of lipids in forages, plant oils and oilseeds, fish oil, marine algae and fat supplements as important dietary strategies which impact on fatty acid composition of ruminant lipids. Forages, such as grass and legumes, are rich in omega-3 PUFA and are a useful natural strategy in improving nutritional value of ruminant products. Specifically this review targets two key areas in relation to forages: i) what is the fate of the lipid-rich plant chloroplast in the rumen and ii) the role of the enzyme polyphenol oxidase in red clover as a natural plant-based protection mechanism of dietary lipids in the rumen. The review also addresses major pathways and micro-organisms involved in lipolysis and biohydrogenation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제6권3호
• /
• pp.31-41
• /
• 2001

본 논문에서는 순수균주인 ENV425와 오염된 토양으로부터 분리한 혼합균주를 이용하여 가솔린 산화제인 MTBE에 대한 분해 가능성을 조사했다. MTBE는 n-butane에서 성장한 ENV425와 혼합균주에 의해 공대사적으로 분해가 이루어졌다. 또한 아세틸렌의 첨가에 의해 n-butane과 MTBE의 분해가 완전히 방해되어짐에 따라 두 기질 모두 부탄 분해 효소에 의해 분해되어짐을 알 수 있었다. n-butane에서 성장한 ENV42S와 혼합균주는 MTBE를 분해하고, MTBE의 분해산물로 TBA가 생성되었다. TBA의 생성은 분해된 MTBE에 대하여 ENV425와 혼합균주 각각 54.7%, 58.6%가 관찰되었다. 그러나, Resting cell 실험에서는 ENV425와 혼합균주에 의한 산화 생성물로 TBA와 TBF가 생성되었다. ENV425와 혼합균주에 의한 최대 MTBE 분해속도는 각각 52.3 그리고 62.3 (nmol MTBE degraded/hr/mg TSS), 최대 $T_y$ (Transformation yield)는 각각 44.7, 34.0 (nmol MTBE degraded/$\mu$mol n-butane utilized)으로 나타났고, 최대 $T_c$ (Transformation capacity)는 각각 199, 226 (nmol MTBE degraded/mg TSS used)으로 나타났다.

• 한국세라믹학회지
• /
• 제43권2호
• /
• pp.69-73
• /
• 2006

A full retention of the tetragonal phase with coarse grains $(50\~60\;{\mu}m)$ was possible with the specimen $ZrO_2-1.9\;mol\%\;Y_2O_3$. In these coarse grains, $\{101\}_t$ annealing twins were frequently observed, although they do not exist in the usual fine grained specimens. The morphology and growth rate of the isothermally formed individual products are studied at an optical microscopic level. The habit planes of both products are also identified by performing two-surface trace analysis on the grains whose orientations are determined by the Electron Back Scattering Pattern (EBSP) method. The morphologies of isothermal martensite were well-defined thin plates and lenticular types. The growth rate in their longitudinal directions was quite slow and temperature-dependent. A two-surface trace analysis, incorporated with the EBSP method, identified the habit planes near $\{013\}_c$, in agreement with previous reports obtained from TEM works.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.45-52
• /
• 2004

Continuing pressure for the weight reduction of vehicles and improvement of collision safety is driving the development of new high strength steel with excellent formability. The formable high strength steels which have excellent drawability have been developed and applied to the complicated inner panels. Although BH steel have mainly occupied the material market for outer panels, it is challenged by DP steel which have low yield strength and good bake hardenability. The advanced high strength steel, TRIP steels and DP steels which have excellent formability are new alternatives to conventional HSLA steel for structural parts such as members and pillars. HSLA steels also have been used for automotive bumper reinforcements due to their high yield ratio. Higher grade complex phase steel(CP) were developed for bumper reinforcements by addition of precipitation hardening to transformation strengthened steel. The usage of the advanced high strength steel ale increasing and will become the main material in structural parts near future. This paper describes the features of newly developed high strength cold rolled steels for automobiles.

• 한국콘텐츠학회논문지
• /
• 제8권10호
• /
• pp.259-267
• /
• 2008

본 연구는 향후 글로벌 자원위기 발생 가능성을 점검해보고, 자원가격의 상승이 우리경제에 어떠한 의미와 영향을 줄 것인지 살펴본다. 향후 글로벌 자원 공급의 제약은 세계경제 성장을 둔화시킬 것이다. 뿐만 아니라 자원위기에 대한 적절한 대응여하에 따라 각국의 경제발전 방향이 결정될 것이다. 자원의 대외 의존도가 높은 우리나라의 경우 현재와 같은 자원 비효율적인 산업구조를 유지한다면 거시경제 충격과 산업 경쟁력 상실로 이어질 수 있다. 따라서 자원 소비가 많은 철강, 화학 등의 제조업부문에서 자원 절감, 제품의 고부가가치화 등이 이루어져야 할 시점이다. 앞으로의 자원위기는 구조적인 공급 제약이 근본 원인이 될 것이다. 따라서 일시적인 위기관리보다 기업, 소비자 등 경제주체들이 자원의 희소성 심화라는 패러다임 변화에 적응할 수 있도록 유도해야 할 것이다. 산업의 구조전환(Industry Transformation)이 원활하게 이루어질 수 있는 환경을 조성해야 한다.

• 한국식품과학회지
• /
• 제50권3호
• /
• pp.249-259
• /
• 2018

Radiation technology (RT) has long been applied in various fields for increasing the safety and shelf-life of foods by controlling pathogen-induced poisoning. RT was introduced for the first time in Korea in the 1950s to eliminate harmful microorganisms in food materials. In the 1980s, RT had been scientifically proven to be effective for the sterilization of food and public health products. In recent years, irradiation with gamma rays has also been used for improving physiological properties through the structural modification of natural molecules, which has been proposed to be applicable to various industries. In particular, radiation transformation technology (RTT), which involves the development of new functional compounds through the molecular conversion of natural biomaterials, is becoming a new high-value technology as a fusion technique of RT and biotechnology. The present reports have suggested that RTT can be an effective tool for the development of new functional compounds and improvement of the physiological activity of biomolecules.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.200-205
• /
• 1993

The automatic forming sequence design system can determine desirable operation sequences even if they have little experience in the design of cold forging process. This system is proposed,which generates forming sequence plans for the multistage cold forging of zxisymmetrical solid products. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the product is a key in planning processes. Forming sequence for the part can be determined by means of primitive geometries such as cylinder,cone, convex, and concave. By utilizing this geometrical characteristics(diameter,height, and radius),the product geometry is expressed by a list of the pnmitive geometries. Accordingly, the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the proper sequence of operations for the part, is generated under the environment of AutoCAD. The preliminary choice of some feasible forming sequences can verify by using the finite element simulation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.367-370
• /
• 2009

Recently, ultra high strength products can be manufactured by the hot press forming process of Boron steel in automotive and electronics industries. In order to get high strength, the hot press forming should be accompanied by quenching process inducing phase transformation. In the study, the heat conductive die and the cooling channel were designed by the numerical simulation and the effect of three different parameters were determined to improve cooling characteristics.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.75-80
• /
• 2003

The purpose of this study was to design wedding dress by using Korean paper(Hanji). The Korean paper showed the good(excellent) properties of durability, softness, and tensile strength was 3.7Kg, tear index was 6 mN$.$$m_2$/g and folding numbers was 466. The appreance of Hanji was widely varied by blending(mixing) with other materials and various effects, pleating, crumpling, twisting and so on were achieved. The dress silhouette and form transformation of Hanji was very easy. Detailed points those are frill, pleats, gather, bow, paper casting, pin tuck for wedding dress were able to express easily. Hanji wedding dress has the natural texture because of natural properties of Hanji and that is echo friendly products.