• Journal of fish pathology
• /
• v.6 no.2
• /
• pp.111-122
• /
• 1993

The mechanism by which $V_H$ region gene segments is selected in B lymphocyte is not known. Moreover, evidence for both random and nonrandom expression of $V_H$ genes in matured B cells has been presented previously. In this report, the technique of in situ hybridization allowed us to analyze expressed $V_H$ gene families in normal B lymphocyte at the single cell level. The analysis of normal B cells in this study eliminated any posssible bias resulting from transformation protocols used previously and minimized limitation associated with sampling size. Therefore, an accurate measure of the functional and expressed $V_H$ gene repertoire in B lymphocyte could be made. One of the most important controls for the optimization of in situ hybridization is to establish probe concentration and washing stringency due to the degree of nucleotide sequence similarlity between different families which in some cases can be as high as 70%. When the radioactive $C{\mu}$ and $V_{H}J558$ RNA probes are tested on LPS-stimulated adult spleen cells, $2{\sim}4{\times}106cpm$/slide shows low background and reasonable frequency of specific positive cells. For the washing condition. 40~50% formamide at $54^{\circ}C$ is found to be optimum for the $C{\mu}$. $V_{H}S107$ and $V_{H}J558$ probes. The analyzed results clearly demonstrate that the level of each different $V_H$ gene family expression is dependent upon the complexity or size of that family. These findings are also extended to the level of $V_H$ gene family expression in separated bone marrow B cells depend upon the various stage of differentiation and conclude no preferential utilization of specific $V_H$ gene family. Thus, the utilization of VH gene segments in B lymphocyte of adult BALB/c mice is random and is not regulated or changed during the differentiation of B cells.

• The Journal of Art Theory & Practice
• /
• no.1
• /
• pp.109-144
• /
• 2003

Orientalness is a concept that expresses the collective identity of the Orient in relation to the West. The concept itself is mutable and defined by the relationship between the two regions at different points in time. Changes in the concept depend on a number of factors, such as cultural influence, the political balance of power between the two regions, and on the interpretative scheme that defines the relationship. In addition, the geographical notion of the concept evolves culturally, socially and politically. During this process, Oriental-ness becomes Oriental-ism at times. I will attempt to survey and measure the progression of Orientalness from its emergence in early 17th century to its subsequent transformation in modern Korea as reflected in art theory and art works. The recognition of the comparative characteristics of Oriental art began when the Orient was exposed to the art of the West in the late Ming dynasty during the early 17th century. The changes in the artistic climate in China affected the late Chosun. I will start with a brief introduction of this time and the birth of Orientalness. The concept gradually changed during the period of Enlightenment(開化期) towards the end of the 19th century, and during the colonial period( 1910-1945) it took on a new form. Establishment of the concept of "Orient"as a single, unifying concept spanning across cultures and national boundaries has been attributed to late Meiji period Japan, whose intention at that time is believed to have been to build a pan-Asia(亞細亞) empire with Japan at its commanding center. It has been stressed that the real motive behind the formation of one single cultural unit, where the shared common written language was Chinese and Confucianism and Taoism were the common metaphysical traditions, was to build one political unit. When the notion of a geographical unit of Asia was replaced by the concept of Asia as a cultural and political unit, a massive growth of interest and discourse were provoked around the concept of Orientalism. When Orientalism was being formulated, Korea automatically became member of "one Asia" when the country became colonized. For Koreans, the identity of the Orient had to be defined in cultural terms, as the political notion of a nation was non-existent at that time. The definition of identity was pursued at two levels, pan-Asian and local. If Orientalism was an elite discourse centered in pan-Asian philosophical and religious tradition, localized Orientalism was a popular discourse emphasizing locality as the byproduct of natural geographic condition. After the liberation in 1945 from colonial rule, a thrust of movement arose towards political nationalism. Two types of discourses on Orientalism, elite and popular, continued as central themes in art. Despite the effort to redefine the national identity by eradicating the cultural language of the colonial past, the past was enduring well into the present time. As discussed above, even when the painting themes were selected from Korean history, the tradition of using history painting as a manifestation of political policy to glorify the local identity had its founding during the Meiji period. The elevation of folk art to the level of high art also goes back to the colonial promotion of local color and local sentiment. Again, the succession of the past (colonial) ideal was defended as the tradition assumed a distinct modern shape that was abstract in style. The concept of the "Orient" is of relative and changing nature. It was formulated in relation to Western culture or civilization. Whatever the real motive of the adoption of them had been, the superiority of the Orient was emphasized at all times. The essence of the Orient was always perceived as the metaphysical tradition as a way to downgrade Western culture as materialistic. This view still prevails and the principle of Orient was always sought in Confucianism, Taoism, and Buddhism. Even when Orientalism was employed by imperialist Japan in an effort to establish her position as the center of the Orient, the spiritual source was still in Chinese philosophy and religion. In art also, the Chinese literati tradition became the major platform for elite discourse. Orientalism was also defined locally, and the so-called local color was pursued in terms of theme and style. Thus trend continued despite the effort to eradicate the remnants of colonial culture long after liberation. These efforts are now being supported politically and also institutionalized to become the aesthetic ideal of the modern Korean art.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.13 no.2
• /
• pp.154-163
• /
• 2010

Purpose: Colonic polyposis is less common in children than in adults. The clinical data pertaining to colonic polyposis in children are limited. Children with colonic polyposis have complications associated with numerous polyps, malignant transformation of the polyps, and extraintestinal neoplasms. We studied the clinical spectrum, endoscopic characteristics, and histologic findings of colonic polyposis in Korean children. Methods: We reviewed the clinical data of 37 children with multiple colonic polyps between 1987 and 2009. The mean age at the time of diagnosis of colonic polyposis was 8.0${\pm}$3.2 years. Results: Peutz-Jeghers syndrome, juvenile polyposis syndrome, familial adenomatous polyposis (FAP), and lymphoid polyposis was diagnosed in 22, 7, 6, and 2 children, respectively. The most common clinical presentation in children with colonic polyposis was hematochezia. A family history of colonic polyposis was noted in 7 children. The colonoscopic findings of colonic polyposis varied with the size and number of polyps. The majority of polyps were multi-lobulatd and pedunculated in children with Peutz-Jeghers syndrome. The polyps in children with juvenile polyposis syndrome were primarily round and pedunculated. For the children with FAP, the colon was carpeted with small, sessile polyps. There were multiple sessile polyps in the patients with lymphoid polyposis. Surgical polypectomy was performed in 14 children (38%). Intestinal segmental resection was performed in 13 children (35%). Four patients with FAP underwent total colectomy. Four children with Peutz-Jeghers syndrome had extraintestinal neoplasms. No malignant transformation of polyp was identified. Conclusion: Children with colonic polyposis should undergo a careful initial evaluation and require periodic re-evaluation.

• Research in Plant Disease
• /
• v.19 no.4
• /
• pp.254-258
• /
• 2013

Fusaric acid (FA) is a mycotoxin produced by Fusarium species. Its toxicity is relatively low but often associated with other mycotoxins, thus enhancing total toxicity. To date, biosynthetic genes or enzymes for FA have not been identified in F. oxysporum. In order to explore the genetic element(s) for FA biosynthesis, restriction enzyme mediated integration (REMI) procedure as an insertional mutagenesis was employed using FA producing-F. oxysporum strains. Genetic transformation of two F. oxysporum strains by REMI yielded more than 7,100 transformants with efficiency of average 3.2 transformants/${\mu}g$ DNA. To develop a screening system using phytotoxicity of FA, eleven various grains and vegetable seeds were tested for germination in cultures containing FA: Kimchi cabbage seed was selected as the most sensitive host. Screening for FA non-producer of F. oxysporum was done by growing each fungal REMI transformant in Czapek-Dox broth for 3 weeks at $25^{\circ}C$ then observing if the Kimchi cabbage seeds germinated in the culture filtrate. Of more than 5,000 REMI transformants screened, fifty-three made the seeds germinated, indicating that they produced little or fewer FA. Among them, twenty-six were analyzed for FA production by HPLC and two turned out to produce less than 1% of FA produced by a wild type strain. Sequencing of genomic DNA regions (252 bp) flanking the vector insertion site revealed an uncharacterized genomic region homologous (93%) to the F. fujikuroi genome. Further study is necessary to determine if the vector insertion sites in FA-deficient mutants are associated with FA production.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.35-41
• /
• 2001

This paper describes Linear Discriminant Analysis and common vector extraction for speech recognition. Voice signal contains psychological and physiological properties of the speaker as well as dialect differences, acoustical environment effects, and phase differences. For these reasons, the same word spelled out by different speakers can be very different heard. This property of speech signal make it very difficult to extract common properties in the same speech class (word or phoneme). Linear algebra method like BT (Karhunen-Loeve Transformation) is generally used for common properties extraction In the speech signals, but common vector extraction which is suggested by M. Bilginer et at. is used in this paper. The method of M. Bilginer et al. extracts the optimized common vector from the speech signals used for training. And it has 100％ recognition accuracy in the trained data which is used for common vector extraction. In spite of these characteristics, the method has some drawback-we cannot use numbers of speech signal for training and the discriminant information among common vectors is not defined. This paper suggests advanced method which can reduce error rate by maximizing the discriminant information among common vectors. And novel method to normalize the size of common vector also added. The result shows improved performance of algorithm and better recognition accuracy of 2％ than conventional method.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.629-635
• /
• 2001

To improve the ductility of $A1_3Hf$ intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior. the effect of Cu addition on the $Ll_2$ phase formation and the behavior of vacuum hot-pressed consolidation were investigated. During the mechanical alloying by SPEX mill, the $Ll_2 A1_3Hf$ intermetallics with the grain size of 7~8nm was formed after 6 hours of milling in Al-25at.%Hf system. The $Ll_2$ Phase of Al_3Hf$ intermetallics with the addition of 12.5at.%Cu, similar to that of the binary Al-25at.% Hf, was formed, but the milling time necessary for the formationof the $Ll_2$ phase was delayed form 6 hours to 10 hours. The lattice parameter of ternary $Ll_2(Al+Cu)_3Hf$ intermetallics decreased with the increase of Cu content. The onset temperature of $Ll_2$ to $D0_{23}$ phase in $Al_3Hf$ intermetallics was around 38$0^{\circ}C$, the temperature upon completion varied from 48$0^{\circ}C$ to 5$50^{\circ}C$ as the annealing time. The onset temperature of $Ll_2$ to $D0_{23}$ phase transformation in $(Al+ Cu)_3Hf$ intermetallics increased with the amount of Cu and the highest onset temperature of $700^{\circ}C$ was achieved by the Cu addition of 10at.%. The relative density increased from 89% to 90% with the Cu addition of 10at.% in $Al_3Hf$ intermetallics hot-pressed in vacuum under 750MPa at 40$0^{\circ}C$ for 3 hours. The relative density of 92.5% was achieved without the phase transformation and the grain growth as the consolidation temperature increased from 40$0^{\circ}C$ to 50$0^{\circ}C$ in $(Al+Cu)_3Hf$ intermetallics hot-pressed in vacuum under 750MPa for 3 hours.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.503-510
• /
• 2005

In this research, composite alumina was prepared to add the various promoters by sol-gel method and examined its thermal stability. After sintering at $1,200^{\circ}C$, the thermal stability resulted in following order, $Si{\fallingdotseq}La$ > Ti > $Ba{\fallingdotseq}Ce$ > Y > $Zr{\fallingdotseq}Mg$, in accordance with adding the promoters. Especially in case of silica-added alumina, a phase transformation temperature to ${\alpha}$-alumina increased about $150^{\circ}C$ and after sintering at $1,200^{\circ}C$, it showed to maintain in ${\gamma}$-form and ${\delta}$-form alumina phase. Also it showed an increase of surface area from $3m^2/g$ to $71m^2/g$ compared with pure ${\alpha}$-alumina. In the case of silicaadded alumina, the characterization change of this alumina particle resulted in a delay of phase transformation because Si-O-Al bond was increased when sintered at high temperature. In case of lanthanum-added alumina, there was a sintering delay phenomenon in inter-particles as $LaAlO_3$ structure existed. The existence of lanthanum structure was confirmed by XRD and XPS analysis. It appeared on the alumina surface as $La_2O_3$ structure when it was sintered under $1,000^{\circ}C$, as the perovskite structure of $LaAlO_3$ at above $1,000^{\circ}C$ and as the magneto-plumbite structure of $LaAl_{11}O_{18}$ at above $1,300^{\circ}C$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.47-65
• /
• 2020

With the era of the Fourth Industrial Revolution in sight, innovative business models utilizing new technologies are emerging, and startups are enjoying an abundance of opportunities based on the agility to respond to disruptive innovations and the opening to new technologies. However, what is most important in creating a sustainable start-up ecosystem is not the start-up itself, but the process of research-start-investment-investment-the leap to listing and big business-in order to build a virtuous circle of startups that leads to re-investment. To this end, the environment created in the hub area where start-ups were conducted is important, and these material and non-material environmental factors are described as being inclusive by the word "entrepreneurial ecosystem." This study aims to provide implications for Korea's entrepreneurial ecosystem through the study of the interaction of the elements that make up the start-up ecosystem and the relationship of ecosystem participants in Singapore. Singapore has been consistently mentioned as the top two Asian countries in assessing the start-up environment and business environment. In this process, six elements of the entrepreneurial ecosystem presented by Isenberg(2010)-policies, finance, culture, support, human resources, and market-are the best frameworks for analyzing entrepreneurial ecosystems in terms of well encompassing prior studies related to entrepreneurial ecosystem elements, and a model of regional transformation is formed focusing on some elements to suit Singapore, the target area of study. By considering that Singapore's political nature would inevitably have a huge impact on finance, Smart Nation policy was having an impact on university education related to entrepreneurship, and that the entrepreneurial networks and global connectivity formed within Singapore's start-up infrastructure had a significant impact on Singapore's start-up's performance, researches needed to look more at the factors of policy, culture and market. In addition, qualitative research of participants in the entrepreneurial ecosystem was essential to understand the internal interaction of the elements of the start-up ecosystem, so the semi-structured survey was conducted by visiting the site. As such, this study examined the status of the local entrepreneurial ecosystem based on qualitative research focused on policies, culture and market elements of Singapore's start-up ecosystem, and intended to provide implications for regulations related to start-ups, the role of universities and start-up infrastructure through comparison with Korea. This could contribute not only to the future research of the start-up ecosystem, but also to the creation of a start-up infrastructure, boosting the start-up ecosystem, and the establishment of the orientation of the start-up education in universities.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.204-214
• /
• 2015

SHI-RELATED SEQUENCE (SRS) genes are plant-specific transcription factors that contain a zinc-binding RING finger motif, which play a critical role in plant growth and development. Among Brassica rapa SRS genes, BrSRS7 and BrLRP1 genes, isolated from shoot apical regions are important regulators of plant growth and development. In order to explore the function of BrSRS genes in horticultural plant growth and development, two constructs containing BrSRS7 and BrLRP1 under the control of a cauliflower mosaic virus 35S promoter were introduced into petunia by Agrobacterium-mediated transformation. The resulting transgenic plants were dwarf and compact plants with reduced plant height and diameter. Additionally, these transgenic plants had upward-curled leaves of narrow width and short internodes. Interestingly, the flower shapes of petunia were different among transgenic plants harboring different kinds of SRS genes. These phenotypes were stably inherited through generations $T_2$ and $T_3$. Semi-quantitative RT-PCR analyses of transgenic plants revealed that BrSRS7 and BrLRP1 regulate expression of gibberellin (GA)- and auxinrelated genes, PtAGL15- and PtIAMT1-related, involved in shoot morphogenesis. These results indicate that the overexpression of BrSRS7 and BrLRP1 genes suppressed the growth and development of petunia by regulating expression of GA- and auxin-related genes. From these data, we deduce that BrSRS7 and BrLRP1 genes play an important role in the regulation of plant growth and development in petunia. These findings suggest that transformation with the BrSRS genes can be applied to other species as a tool for growth retardation and modification of plant forms.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2011

The Sensor technology and portable device capability able to collect recent user information and the information about the surrounding environment haven been highly developed. A user can be made use of various contents and the option is also extending with this technology development. In particular, the initial portable device had simply a call function, but now that has evolved into 'the 4th screen' which including movie, television, PC ability. also, in the past, a portable device to provided only the services of a SMS, in recent years, it provided to interactive video service, and it include technology which providing various contents. Also, it is rising as media which leading the consumption of contents, because it can be used anytime, anywhere. However, the contents available for the nature of user's handheld devices are limited. because it is very difficult for making the contents separately according to various device specification. To find a solution to this problem, the study on one contents from several device has been progressing. The contents conversion technology making use of the profile of device out of this study comes to the force and profile study has been progressing for this. Furthermore, Demand for a user is also increased and the study on the technology collecting, analyzing demands has been making active progress. And what is more, Grasping user's demands by making use of this technology and the study on the technology analyzing, providing contents has been making active progress as well. First of all, there is a method making good use of ZigBee, Bluetooth technology about the sensor for gathering user's information. ZigBee uses low-power digital radio for wireless headphone, wireless communication network, and being utilized for smart energy, automatic home system, wireless communication application and wireless sensor application. Bluetooth, as industry standards of PAN(Personal Area Networks), is being made of use of low power wireless device for the technology supporting data transmission such as drawing file, video file among Bluetooth device. With analyzing the collected information making use of this technology, it utilizes personalized service based on network knowledge developed by ETRI to service contents tailor-made for a user. Now that personalized service builds up network knowledge about user's various environments, the technology provides context friendly service constructed dynamically on the basis of this. The contents to service dynamically like this offer the contents that it converses with utilizing device profile to working well. Therefore, this paper suggests the system as follow. It collects the information, for example of user's sensitivity, context and location by using sensor technology, and generates the profile as a means of collected information as sensor. It collects the user's propensity to the information by user's input and event and generates profile in the same way besides the gathered information by sensor. Device transmits a generated profile and the profile about a device specification to proxy server. And proxy server transmits a profile to each profile management server. It analyzes profile in proxy server so that it selects the contents user demand and requests in contents server. Contents server receives a profile of user portable device from device profile server and converses the contents by using this. Original source code of contents convert into XML code using the device profile and XML code convert into source code available in user portable device. Thus, contents conversion process is terminated and user friendly system is completed as the user transmits optimal contents for user portable device.