• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.21-28
• /
• 2021

In this paper, a novel data transferring method is introduced that can transmit sensor data without using data bandwidth or an extra-processing cycle in a delay insensitive network. The proposed method uses human devices as Mules, does not disturb the device owner for permission, and saves energy while transferring sensor data to the collection hub in a wireless sensor network. This paper uses IP addressing technique as the data transferring mechanism by embedding the sensor data with the IP address of a Mule. The collection hub uses the ARP sequence method to extract the embedded data from the IP address. The proposed method follows WiFi standard in its every step and ends when data collection is over. Every step of the proposed method is discussed in detail with the help of figures in the paper.

• Journal of Information Management
• /
• v.28 no.1
• /
• pp.34-61
• /
• 1997

This study suggests that the model of electronic document delivery service be carried out by academic libraries step by step, based on the analysis of the domestic and foreign status. The model consists of the user's request step, electronic document building step, electronic document transferring step. Academic libraries should perform the electronic document delivery service step by step that satisfies user's information need.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.712-718
• /
• 2005

In this study, a translator for transferring structural analysis data among commercial structural analysis programs was developed. The translator adopted the neutral format type based on ISO standard STEP AP 209 not only for the international standardization and robustness but also for the efficient management of structural analysis data Additional load entity is developed and added to AP 209 for the prevention of loss of information in retrieving exact loading condition. A modulization which is needed for efficient management and extension of the translator was made for the encapsulation of file format of each commercial code. Pilot tests peformed with 3-D frame analysis data of Sung-su bridge show that the developed translator guarantees the integrated management of analysis information as well as the exact transferring and retrieving of analysis data and related information.

• Applied Microscopy
• /
• v.51
• /
• pp.8.1-8.7
• /
• 2021

Growing demands for comprehending complicated nano-scale phenomena in atomic resolution has attracted in-situ transmission electron microscopy (TEM) techniques for understanding their dynamics. However, simple to safe TEM sample preparation for in-situ observation has been limited. Here, we suggested the optical microscopy based micro-manipulating system for transferring TEM samples. By adopting our manipulator system, several types of samples from nano-wires to plate-like thin samples were transferred on micro-electro mechanical systems (MEMS) chip in a single step. Furthermore, the control of electrostatic force between the sample and the probe tip is found to be a key role in transferring process.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1562-1568
• /
• 2014

Based on the average method and the geometrical technique to calculate the average value, the average model of the open-loop step-up converter in CCM operation is established. The DC equilibrium point and corresponding small signal model is derived. The control-to-output transfer function is presented and analyzed. The theoretical analysis and PSIM simulations shows that the control-to-output transfer function includes not only the DC input voltage and the DC duty cycle, but also the two inductors, the two energy-transferring capacitors, the switching frequency and the load. Finally, the hardware circuit is designed, and the circuit experimental results are given to confirm the effectiveness of theoretical derivations and analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.199-202
• /
• 2003

Ultraviolet-nanoimprint lithography (UV-NIL) is a promising method for cost-effectively defining nanoscale structures at room temperature and low pressure. Since the resolution of nanostructures depends strongly upon that of nanostamps, the nanostamp fabrication technology is a key technology to UV-NIL. In this paper, a 5$\times$5$\times$0.09 in. quartz stamp whose critical dimension is 377 nm was fabricated using the etch process in which a Cr film was employed as a hard mask for transferring nanostructures onto the quartz plate. To effectively apply tile fabricated 5-in. stamp to UV-NIL on a 4-in. Si wafer, we have proposed a new UV-NIL process using a multi-dispensing method as a way to supply resist on a wafer Experiments have shown that the multi-dispensing method can enable UV-NIL rising a large-area stamp.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.16 no.1
• /
• pp.92-102
• /
• 2009

Purpose: Relocation stress is a common phenomenon in patients discharged from an intensive care unit(ICU) to a ward. Therefore, nurses need to be aware of the problems that can arise during the transfer process. The aim of this study was to identify nurses' experiences in transferring critically ill patients from the ICU to a ward. Method: Focus group interviews were done with 13 nurses from wards and ICU, which participated in receiving and sending of ICU patients. The debriefing notes and field notes were analyzed using the consistent comparative data analysis method. Result: Seven major categories were identified in the analysis of the data. These were 'mixed feeling about transfer', 'lack of transfer readiness', 'increase in family burden', 'uncertainty with unfamiliar environment', 'difficulty in decision making', 'difference of perception of the relationships between patients and health care providers', 'need for continuity of nursing care'. Conclusion: Transferring out of the critical care area should be presented to the patient and family as a positive step in the recovery process. However, a more universal method of passing information from nurse to nurse is needed to assist in a smooth transition.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.3
• /
• pp.35-40
• /
• 2000

There are two problems in H.26X compression technique. One is compressing time in encoding process and the other is degradation of the decoded video quality due to high compression rate. For transferring moving pictures in real-time, it is required to adopt massively high compression. In this case, there are a lot of losses of an original video data and that results in degradation of quality. Especially degradation called by blocking artifact may be produced. The blocking artifact effect is produced by DCT-based coding techniques because they operate without considering correlation between pixels in block boundaries. So it represents discontinuity between adjacent blocks. This paper describes methods of quality compensation for H.26x decoded data and enhancing encoding speed for real-time operation. Our goal of the quality compensation is not to make the decoded video identical to a original video but to make it perceived better through human eyes. We suggest an algorithm that reduces block artifact and clears decoded video in decoder. To enhance encoding speed, we adopt new four-step search algorithm. As shown in the experimental result, the quality compensation provides better video quality because of reducing blocking artifact. And then new four-step search algorithm with $MMX^{TM}$ implementation improves encoding speed from 2.5 fps to 17 fps.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.313-320
• /
• 2003

The efficient and well organized database is essential for the management of information in every industrial field. In this study, a practical and effective database which can handle 3-D information of steel bridges is built on the basis of a STEP-based data model. The data model of steel bridge information is classified into geometric and non-geometric part and the design information is represented by linking geometric information and life cycle supported non-geometric information. Especially, the shape information is represented by boundary representation method, which is one of the representative methods of solid model information. In this study, ISO/STEP(STandard for the Exchange of product model data) AP203(configuration controlled design) EXPRESS schema is used to represent the shape information of steel bridge. The syntax of EXPRESS schema of developed data model is verified by NIST Expresso - is a tool for parsing and compiling EXPRESS schema. Also, this study verifies the conformance of the data model by applying to the real data of Hannam bridge. Therefore, the constructed database using STEP-based data model of steel bridges can be used effectively in the concurrent engineering point of view with transferring and sharing steel bridge information.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.615-624
• /
• 2001

Internet technology opens up another domain for building future CAD/CAM environment. The environment will be global, network-centric, and spatially distributed. In this paper, we present a new approach to network-centric virtual prototyping (NetVP) in a distributed design environment. The presented approach combines the current virtual assembly modeling and analysis technique with distributed computing and communication technology fur supporting virtual prototyping activities over the network. This paper focuses on interoperability, shape representation, and geometric processing for distributed virtual prototyping. STEP standard and CORBA-based interfaces allow the bi-directional communication between the CAD model and virtual prototyping model, which makes it possible to solve the problems of interoperability, heterogeneity of platforms, and data sharing. STEP AP203 and AP214 are utilized as a means of transferring and sharing product models. In addition, Attributed Abstracted B-rep (AAB) is introduced as 3D shape abstraction for transparent and efficient transmission of 3D models and for the maintenance of naming consistency between CAD models and virtual prototyping models over the network.