• Journal of Korean Society of Transportation
• /
• v.13 no.4
• /
• pp.105-115
• /
• 1995

This paper deals with an operation concept of "time-transfer of buses", in which buses arrive a transfer center at the same time and allow passengers to transfer to other bus lines, so that passengerscan go anywhere all the timed-transfere buses operate with only one transfer. This timed-transfer bus system is known as an efficient operating technique which can be adopted in an area with sparsely distrubuted bus demand. A model of timed-transfer is estabilished in terms of vaious factors such as the expected(or average) arrival time, distribution of arrival time, timed-transfer cycle, shceduled departure time, etc. It is assumed that the objective of timed-transfer bus system is to minimize the total transfer waiting time. The optimal schedualed arrival time or buffer time(time required to arrive ealy in consideration of delay) is analyzed for a general case and various speicial cases. It was found that the optiaml buffer time is an inverse funcion of the timed-transfer cycl and increases with the cycle time, assumin g that there is a fixed scheduled departure time at the transfer cetner regardless of whether one or more buses fail to arrive before the scheduled departure time. If buses are to wait uhtil all the buses arrive at the transfer center, that is, the transfer departure time is vairable, the optimal scheduled arrival times can be obtained by a mathmatical programming.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.217-227
• /
• 2008

The purpose of this research is the estimation of a transfer ratio according to transfer time reflecting passenger attributes such as sex, age, income, job, the car ownership, and other variables with the assumption that a transfer ratio would be different depending on each passenger attribute. This research tested transfer time through a question-survey, estimated transfer time according to the passenger attributes using a data sample, and presented some applicable models about marginal transfer time for the case of the determination of transfer ratios according to transfer time. In this research the sample which had been surveyed for passengers walking to access a transfer station was used to test and estimate and the question was present walking time to the transfer time and the marginal transfer walking time.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.52-58
• /
• 1998

The effect of Si content in welding wires on th arc stability was investigate, in the region of short circuit transfer and spray transfer. In the region of short circuit transfer, with increasing Si content, average arcing time and average short circuit time were increased. Therefore, droplet transfer frequency was decreased, due to the increase of arcing time and peak current at the moment of arc-reiginition was increased, due to the increase of short circuit time. In the region of spray transfer, the fluctuations of arc current and arc voltage was the most stable in wire with Si content of about 00.60 wt.%.

• Journal of Welding and Joining
• /
• v.17 no.1
• /
• pp.55-61
• /
• 1999

The effect of S content in welding wires on the arc stability was investigated, in the region of short circuit transfer and spray transfer. In the region of short circuit transfer, with increasing S content, average arcing time and average short circuit time were decreased. Therefore, droplet transfer frequency was increased, due to the reduction of arcing time and peak current at the moment of arc-reiginition was decreased, due to the decrease of short circuit time. In the region of spray transfer, the fluctuation degree of arc current and arc voltage became more stable, with increasing S content.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.238-243
• /
• 1999

Minimum-fuel and -time orbit transfer are two major goals of the satellite trajectory optimization. In this paper, we consider satellites in two coplanar elliptic orbits when the apsidal lines coincide, and analytically find the conditions for the two-impulse minimum-time transfer orbit using Lambert's theorem. The transfer time is a decreasing function of a variable related to the transfer orbit's semimajor axis in the minimum-time case. In the minimum-time case, there is no unique minimum-time solution, but there is a limiting solution. However, there exists a unique solution in the case of minimum-fuel transfer, fur which we find analytically the necessary and sufficient conditions. As a special case, we consider when the transfer angle is one hundred and eighty degrees. In this case, we show that we obtain the classical fuel-optimal Hohmann transfer orbit. We also derive the Hohmann transfer rime and delta-velocity equations from more general equations, which are obtained using Lambert's theorem. We note the tradeoff between minimum-time and - fuel transfer. An optimal coplanar orbit maneuver algorithm to trade off the minimum-time goal against the minimum-fuel goal is proposed. Finally, the numerical simulation results are given to demonstrate the derived theory and the algorithm.

• Journal of Korean Clinical Health Science
• /
• v.7 no.1
• /
• pp.1215-1223
• /
• 2019

Purpose: This study is to figure out not only the characteristics relating to transfer time of inter-hospital transfer patient which is transferred by a private ambulance, but also factors influencing the transfer time. Methods: In this study, an analysis of 750 patients with high severity levels among those transferred to another hospital by a private ambulance in Busan for whole year of 2017. Results: The results showed that the following factors significantly influence the total inter-hospital transfer time: Ambulance crew (${\beta}=10.525$, p=.001) and patient and carer (${\beta}=37.606$, p<.001) when setting a doctor (selecting a medical institution) as a criterion; availability of the specialized care (${\beta}=12.435$, p=.008) when setting the near distance (reason for selecting a hospital for transfer) as a criterion. The explanatory power of this analysis was R2=0.423, whereas the explanatory power of calibration was R2=0.411. Conclusions: Factors that increase the total inter-hospital transfer time were the ambulance crew, and patient and carer's selecting a medical institution, and the reason for selecting a hospital where enables to offer the specialized care services.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.117-130
• /
• 2007

Incheon International Airport has handled 3,054,485 transfer passengers (11.9% transfer rate) and 950,441 transfer cargo(44.2% transfer rate)recorded in 2005. Comparing to 30-40% transfer passenger rate which are competition hub airports in northeast Asia, transfer passenger rate of Incheon International Airport is lower. Above all, We think that Minimum Connecting Time(MCT) which is relating factors with transfer rate need to be monitored to make up for the weak points in the current Incheon internationalairport system. Minimum Connecting Time is defined the legally minimum time necessary to change planes at a given airport. and Transfers represent 35% of the total passenger volume at Vienna International Airport in Europe, which underscores our function as a major international hub. Vienna is rated priority in reservation systems because of our excellent minimum connecting time, and that increases the sale of tickets through our airport. In 2004 the total number of transfer passengers rose 18% to 5,089,624. Short routes, a one roof concept and an outstanding logistics system make Vienna an ideal airport for transfers. This transfer-friendly one roof concept will also form the basis for the new VlE-Skylink Terminal. In case of Japan, Star Alliance has also implemented its so called "Move under one roof"concept at the new Centrair airport. All member carriers are located in the same part of the termina1, sharing check-in counters and ticketing facilities. Star Alliance member carriers can now offer customersa reduced average minimum connecting time of one hour, for transfers between international and domestic. The research purpose of the Study on the Enhancement for Minimum Connecting Time of Incheon International Airport is to increase transfer rate of passenger and cargo of Incheon International Airport at Northeast Asia through this paper.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.183-188
• /
• 2006

Heat transfer coefficients have great influence on finite element analysis results in elevated temperature forging processes. Experimentally calculated contact heat transfer coefficient is not suitable for one-time finite element analysis because analyzed temperature will be appeared to be too low. To get contact heat transfer coefficient for one-time finite element analysis, tool temperature in operation was measured with thermocouple and repeated finite element analysis was performed with experimentally calculated contact and cooling heat transfer coefficient. Surface temperature of active tool was obtained comparing measurement and analysis results. Contact heat transfer coefficient for one-time finite element analysis was achieved analyzing surface temperature between repeated finite element analysis and one-time finite element analysis results.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.63-68
• /
• 2016

Texture transfer is a method to transfer the texture of an input image into a target image, and is also used for transferring artistic style of the input image. This study presents a real-time texture transfer for generating artistic style video. In order to enhance performance, this paper proposes a parallel framework using T-shape kernel used in general texture transfer on GPU. To accelerate motion computation time which is necessarily required for maintaining temporal coherence, a multi-scaled motion field is proposed in parallel concept. Through these approach, an artistic texture transfer for video with a real-time performance is archived.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.99-103
• /
• 2010

It is necessary to improve transfer impedance of express bus terminal users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in express bus terminal and calculated transfer impedance on major express bus terminals in Korea. The study results show that the addition of 100 meter exterior walking distance increases 3 minute travel time, 100 meter interior walking distance increases 5 minute travel time, 100 stairways increase 13 minute travel time, and escalators decreases 3 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different bus terminals and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.