• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• 제19권1호
• /
• pp.42-49
• /
• 2009

In this paper, an alternative method was introduced to conduct a transfer path analysis for airborne noise. The method used the transfer function matrix composed of acoustic transfer functions that are referenced by the input voltage of a calibration source. A calibration factor which is converting a virtual voltage to source strength was deduced by vibro-acoustical reciprocity theorem. The calibration factor is then multiplied to the virtual input voltage to estimate the operational source strength. Three loudspeakers were used to noise sources of acrylic half car model. The method was applied to airborne noise transfer path analysis of the half car. The estimated source strength by transfer path analysis was compared the deduced source strength by vibro-acoustical reciprocity to verify the method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.782-788
• /
• 2008

In this paper, a comparison about two representative Transfer Path Analysis(TPA) methods for air-borne noise based on, matrix inversion method and pressure transmissibility, are presented on the view point of crosstalk effect between sources. In order to assess accuracy of two methods according to path models between virtual airborne noise sources, experiments are made for two cases, weak and strong crosstalk effect condition, by using acrylic vehicle model. Based on this assessment, the paper presents a reasonable application criteria for TPA method according to the circumstances of air-borne noise sources.

• Journal of the Korean Society for Precision Engineering
• /
• 제13권2호
• /
• pp.168-175
• /
• 1996

The measured vibration on a machine or a structure is shaped by the excitation waveform and the path transfer function. Mechanism diagnostics tends to focus on retrieving source features by minimizing the effects of the structiral path, while in structural diagnostics we are more interested in minimizing source effects and retrieving path parameters. In structural diagnostics, therefore, there are experimental issues of gathering date that are independent source effects and finding a transfer function signature that reveals structural defects. This paper describes how the transfer function can be obtained more accurately by experiment using the compatibility relationship which is newly discovered.

• Proceedings of the SAREK Conference
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.597-602
• /
• 2008

The experiment of performance about closed-wet cooling tower(CWCT) was conducted in this study. The test section has the cooling water that flows from top part of a heat exchanger that has an entrance of cooling water with one and multi path. The heat exchanger consists of 15.88mm tubes with ten rows and ten columns and staggered arrangement. In this experiment, heat and mass transfer coefficients and range are calculated with variations of cooling water and path. The results indicated that operating CWCT using two path have the high values of heat and mass transfer coefficients and range than one path.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제15권3호
• /
• pp.60-67
• /
• 2016

In cumulative transfer functions, as number of transfer increase, the impact of individual transfer to transfer cost increase linearly or non linearly. This function can effectively explain various passengers's travel behavior who choose their travel routes in integrated transit line networks including bus and railway modes. Using the function, it is possible to simulate general situations such that even though more travel times are expected, less number of transfer routes are preferred. However, because travel cost with cumulative transfer function is known as non additive cost function types in route search algorithms, finding an optimal route in integrated transit networks is confronted by the insolvable enumeration of all routes in many cases. This research proposes a methodology for finding an optimal path considering cumulative transfer function. For this purpose, the reversal phenomenon of optimal path generated in route search process is explained. Also a heuristic methodology for selecting an optimal route among multiple routes predefined by the K path algorithm. The incoming link based entire path deletion method is adopted for finding K ranking path thanks to the merit of security of route optimality condition. Through case studies the proposed methodology is discussed in terms of the applicability of real situations.

• Journal of Power System Engineering
• /
• 제6권3호
• /
• pp.57-63
• /
• 2002

This paper describes the acoustic analysis of mid duty truck. The focus of the analysis is on structure borne engine noise with major contributions of 2nd order. It has been previously recognized that the noise contribution of each transfer path of structure borne noise can be varied with the charateristics of each mounts and vibro acoustic sensitivity of car body. The structure of car body will be split up into three major sub components, which are modeled separately, the engine, the frame and the cab. The acoustic performance is evaluated on three levels: engine to frame transfer, frame to cab transfer, and panel contribution from cab to driver. In order to perform these analyses, analytical models are created for the engine, frame, cab and acoustic cavity. The models are linked through a coupled fluid structure calculation, and through FRF Based Substructuring for the structural couplings. Based on the structural coupling calculations, a transfer path analysis is performed to identify the most important transfer paths. These paths are then the focussing points for applying modifications to the structure or the mount system. Finally, a number of modification are proposed and their effect is quantified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권3호
• /
• pp.332-337
• /
• 2016

The rapid reconstruction of a transfer path is caused by frequent secession of nodes in many applications using overlay multicast. For this, however, many studies have been proposed, but a study of fast path recovery is required. This paper proposes a new method for fast path recovery to improve the path reconstruction time and for stable path maintain caused by the sudden secession of the parent node on overlay multicast. The proposed method uses the virtual transfer path and the candidate parent node for the fast path recovery. All nodes exchange periodically the RTT (Round Trip Time) information between the other nodes of similar position itself and neighboring node. All nodes have a candidate parent node list, and each node stores the exchanged RTT information on the list. Each node constructs the virtual transfer path to reduce the recovery time after deciding a candidate parent node that is one of them by the RTT order. In this way, when the parent node is seceded, all nodes can recover the transfer path quickly using the virtual transfer path. The simulation result showed that the recovery time of the proposed method is an average 30% faster than the known method.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• Journal of Korean Institute of Industrial Engineers
• /
• 제27권2호
• /
• pp.140-149
• /
• 2001

The paper discusses the problem of finding the Origin-Destination(O-D) shortest paths in internodal transportation networks with time-schedule constraints. The shortest path problem on the internodal transportation network is concerned with finding a path with minimum distance, time, or cost from an origin to a destination using all possible transportation modalities. The time-schedule constraint requires that the departure time to travel from a transfer station to another node takes place only at one of pre-specified departure times. The scheduled departure times at the transfer station are the times when the passengers are allowed to leave the station to another node using the relative transportation modality. Therefore, the total time of a path in an internodal transportation network subject to time-schedule constraints includes traveling time and transfer waiting time. In this paper, a genetic algorithm (GA) approach is developed to deal with this problem. The effectiveness of the GA approach is evaluated using several test problems.

• International Journal of Highway Engineering
• /
• 제13권1호
• /
• pp.197-206
• /
• 2011

The Korean government concentrates on supplying public transit facilities for the mobility handicapped. In other hands, increasing needs of transfer information when the mobility handicapped use transit facilities are substantial but not satisfactory as a whole. This study focuses on evaluating the applicability of developed K-path algorithm to provide user-customized route information that could make an active using of public transit while considering the mobility handicapped preferences. Developed algorithm reflects on requirements considering transfer attributes of the mobility handicapped. Trip attributes of the handicapped are addressed distinguished from handicapped types such as transfer walking time, transfer ratio, facility preferences and etc. This study examines the verification and application of the proposed algorithm that searches the least time K-paths by testing on actual subway networks in Seoul metropolitan areas. It is shown that the K-path algorithm is good enough to provide paths that meet the needs of the mobility handicapped and to be adoptable for the future expansion.